Only show results in Virginia? Ok

parts cleaning process equipment

  • Premium

    Waste Wood Recycling System

    Recycling waste wood plays an important part in environmental protection. Particularly clean waste wood can be recycled and reused as a new product (e.g. recycled chipboard).

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA. from Waste Wood Recycling System Product line

  • ProJet - Mega Process Filter

    The process filter ProJet mega have been developed for dedusting large volume flows. The variety of parts of the ProJet mega series is significantly reduced while maintaining a maximum number of possible explanations. For a relatively small number of constructive primitives are solely responsible for in-line filter of 1-12 filter ...

    By Intensiv-Filter Himenviro GmbH based in Velbert-Langenberg, GERMANY. from Mega Process Filter Product line

  • Proceco - Tumbler Slurry Blaster

    Designed to degrease, blast clean, aqueous clean, and rust inhibit in one system – with no additional or complementary process equipment required – the PROCECO Tumbler Slurry Blaster is the ultimate metal component blast cleaning process. The PROCECO Tumbler Slurry Blaster automatically processes batches of parts of various sizes ...

    By Proceco Ltd. based in Montreal, QUEBEC (CANADA). from Tumbler Slurry Blaster Product line

  • Semiconductors System

    Leveraging our technology base, engineering talent, and experience with design/build of high precision automation, PaR Systems provides intelligent solutions to the semiconductor industry. When manual cleaning processes prove to be inadequate (too labor intensive, inconsistent, produce low yields, or poorly clean your parts), PaR's Process Team ...

    By PaR Systems, Inc. based in Shoreview, MINNESOTA (USA). from Semiconductors System Product line

  • Danieli - Model DCR - Shredding Plant

    Through a continuous process of product development, Danieli Lynxs scrap shredder plants combine technical ingenuity with engineering excellence. A complete service is available to the scrap shredder operator, from full turnkey design, manufacture and installation of new integrated facilities to the supply of replacement rotors and wear parts. At ...

    By Danieli Centro Recycling based in CHAMBERY, FRANCE. from Shredding Plant Product line

  • Premium

    MCZ - Static Volumetric Injection According to ISO 6144

    Mixing chamber (injection chamber) to inject a known volume of a component to generate a gas mixture with known concentration. The process is the primary standard to generate gas mixtures to calibrate gas analyzers. The development was for the most part carried out by the National EU Clean Air Reference Lab, a division of the Federal Environmental ...

    By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY. from Static Volumetric Injection According to ISO 6144 Product line

  • Tethys Instruments - Dissolved Oxygen Probe Auto Cleaning

    Tethys Process Optical DO Probe is based on proven Fluorescence Optical Technology suitable for most industrial application. It is rugged, without replacement sensor cap and having auto-cleaning feature. It is designed for submersible mounting in open basin. Optical DO probe is suitable for measurement of dissolved oxygen measurement in various ...

    By Tethys Instruments SAS based in Meylan, FRANCE. from Dissolved Oxygen Probe Auto Cleaning Product line

  • EnviroWipe - Cleaning & Neutralizing Wipes for Lead-acid Batteries

    Features; Two-color-change process lets you know if acid is present and has been neutralized. Specially designed for use on lead-acid batteries. Pre-moistened wipes neutralize acid on contact.. Pop-up dispensing canister makes handling easy. Cleans corrosion on multiple surfaces while imparting a corrosion inhibitor. Simultaneously cleans and ...

    By EnviroGuard based in Montclair, CALIFORNIA (USA). from Cleaning & Neutralizing Wipes for Lead-acid Batteries Product line

  • Premium

    TunnelTech - Model 503 - Electrochemical NO2 Monitor

    The TunnelTech 503 NO2 sensor, is an essential part of any road or rail tunnel safety system. Firstly, it monitors the atmosphere within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air to protect tunnel users health. NO2 is produced naturally by the combustion processes within the internal combustion engine ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Electrochemical NO2 Monitor Product line

  • Premium

    Extran - Emulsified Oil Water Separators

    The Extran Ultrafiltration System is a proven and dependable filtration system designed to clean contaminated parts wash water for re-use and to filter oily wastewater for discharge. This system continuously removes oil and particulate from the process fluid and returns the purified solution for re-use. This is done through a series of filters and ...

    By Separation Dynamics based in Fountain Inn, SOUTH CAROLINA (USA).

  • Reactor for Organic Matter (RMO) Technology

    Enerpy has developed a clean technology that efficiently produces raw materials from organic waste. The RMO is the solution for many waste problems. Organic waste can efficiently be converted with the RMO. Agro-industrial residues, used tires, green waste, domestic waste, litter etc. All organic waste with an animal or vegetable origin, ...

    By Enerpy BV based in Maarn, NETHERLANDS.

  • Premium

    Siemens - Low NOx Standard Continuous Emissions Monitoring Systems (CEMS)

    The Standard CEMS is a low cost emissions monitoring package designed to operate in a general purpose, environmentally controlled shelter or cabinet. The targeted markets are NOX reduction sites at Refining, Hydrocarbon Processing and Chemical Plants. The standard monitoring requirements are based on the US EPA 1990 Clean Air Act as detailed in 40 ...

  • Premium

    Mighty Mike Bond-SORB - Odor Eliminator

    The management of odor is an important part of any commercial cleaning and restoration operation. Eliminates an unlimited variety of industrial malodors, the Mighty Mike Bond-SORB Odor Eliminator is an environmentally responsible, non-toxic, biodegradable, water soluble, odor neutralizer to absorb and destroy odors on contact for the waste ...

    By BioMicrobics, Inc. based in Lenexa, KANSAS (USA). from Odor Eliminator Product line

  • Model RT-65 DB Series - Manual Batch Wastewater Treatment Unit

    Simple, safe, and cost effective method to treat almost any aqueous based wastewater effluent. Treats a drum of wastewater for less than $10.00. No hazardous treatment by-products. Guaranteed to meet discharge limits to local sewer. Compact Design. Low capital cost. Low maintenance, available 3 year, 100% parts replacement warranty. Ideal for ...

    By Wastewater Engineers, Inc. based in Oxford, MICHIGAN (USA). from Manual Batch Wastewater Treatment Unit Product line

  • Warman - Model QCV - Axial Flow Pump

    The Warman Q-Series Axial Flow Pumps ensure continuous circulation of abrasive and corrosive fluids. The QCV model is bottom flange designed for direct mounting to a reactor vessel. The Warman Q-Series Axial Flow Pumps offer high quality and reliability, high efficiencies and low energy consumption for continuous circulation of ...

    By The Weir Group PLC based in Glasgow, UNITED KINGDOM. from Axial Flow Pump Product line

  • Sewage Treatment Plant

    We are actively engaged in designing and manufacturing Sewage Treatment Plant that is required for sewage water cleaning application. The different types of Sewage Treatment Plants that we offer are available in numerous configurations and sizes. In the making of Sewage Treatment Plants, we utilize the finest grade parts & components. In ...

    By RRR ENVIRO SYSTEMS based in Chennai, INDIA.

  • Warman - Model Q-Series QCV - Axial Flow Pump

    The Warman Q-Series Axial Flow Pumps ensure continuous circulation of abrasive and corrosive fluids. The QCV model is bottom flange designed for direct mounting to a reactor vessel. The Warman Q-Series Axial Flow Pumps offer high quality and reliability, high efficiencies and low energy consumption for continuous circulation of ...

    By Weir Power & Industrial based in Glasgow, UNITED KINGDOM. from Axial Flow Pump Product line

  • Cut- and Washing-Systems

    With our processing techniques we are able to fulfil the versatile tasks of recycling. In addition to shredders for chopping up massive pieces of plastic we also have the right techniques for granulating large-volume parts as well as aglomerators and other technologies to face and master all the different tasks that are involved in processing. We ...

    By CPE Entsorgung GmbH based in Liebenau, GERMANY.

  • Reconditioned IBC Parts

    All IBC remanufactured parts are run through a five-step process:\n1. Valves are inspected and any non-function parts are replaced\n2. Each valve is disassembled and separated\n3. Valve pieces are soaked in pre-clean solution\n4. Run through a wash and dry process until specifications are met\n5. Cleaned & remanufactured valve is assembled, ...

    By BASCO, Inc based in University Park, ILLINOIS (USA).

  • Model SR4000 - Biological Parts Washer

    The biological parts washer cleans your parts without solvent, while respecting operator’s health and the environment. These parts washers are heated at 38°C in order to ensure an optimal cleaning process by being through the brush, the soaking or the sprinkle.

    By SRI France based in Pierre-Bénite, FRANCE. from Biological Parts Washer Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you