We couldn't find any PE pipe equipment suppliers or service providers located in Tunisia

Here is a list of equipment results with suppliers serving Tunisia

PE pipe equipment available in Tunisia

  • Agrotime - PE Pipe

    PE pipe is widely used in irrigation systems, with the advantage of easy installation, no rust, no scaling and convenient maintenance.PE pipe is widely used because of its features, such as the excellent toughness( more than 500% breaking elongation rate), non-toxic materials. It can effectively improve the safety and reliability of water supply.

  • WaStop - PVC/PE Pipe

    WaStop PVC range is primarily used in sewer and odour applications.  The PVC range is installed inline with the existing pipes using flexible couplings or slide couplings. WaStop PVC range is available from DN75mm (NPS 3″) up to DN 200mm (NPS 8″).  For dimensions over this size PE or Stainless is recommended.

    By WaStop International AB based in Karlshamn, SWEDEN.

  • Model UNI 7990:20044 - Low Density PE pipes

    The LDPE PIPES AGRIPLASTIC are products in conformity with the UNI 7990:2004 standard, to be at the Ministry of Health's disposal - Ministry not. 174 of april 6 2004 and have the quality mark IIP-UNI. Purchasers, for the products with these standard, must give access to the IIP Officers to examine and verify the conformity.

    By Soaplast srl based in Regalbuto, ITALY. from Low Density PE pipes Product line

  • YUDA - Model RDH315 - PE PIPE WELDING MACHINE

    RDH315/160 PE PIPE WELDING MACHINEApplication:Suitable for butt fusion welding of plastic pipes and fittings made of PE,PP, and PVDF in construction site or workshop.Features:1. consists of basic frame, heating plate, planning tool, and support (for planning tool & heating plate) 2. ...

  • Pe Dripping Pipes

    Pe Dripping Pipes size 16 mm, 20 mm . Roll. 400 mt, 300 mt.

    By Senkron Plastik based in Ostim, TURKEY. from Pe Dripping Pipes Product line

  • MPJ - Universal PE Pipe Dambing Tool

    Universal tool for centering is used in the welding electrofusion type of fittings like coupler, tee, elbow 90' and 45°. Diameter range: 16-63 mm.

    By MPJ SP. Z O. O. SP. K based in Lublin, POLAND.

  • Pipe Coil Trailers

    Around 3,000 of our pipe coil trailers have now been sold throughout the world, evidence of their effectiveness and efficiency in assisting pipe laying activities. Safety considerations are paramount in the design of our trailers. The coil is restrained within a steel cage whilst the two ends of PE are secured. The central drum design ensures ...

    By Steve Vick International Ltd based in Bradford, UNITED KINGDOM. from Pipe Coil Trailers Product line

  • jiuhe - Model PE pipe - high quality PE pipe from China

    Hebei Jiuhe Rubber & Plastic Products Co.,Ltd is an Chinese owned and operated manufacturer of the industry’s highest quality plastic pipe products. We produce one of the industry’s most comprehensive product lines, featuring PP-R, PE-RT, PVC, Polyethylene, plastic pipe & fitting and tubing. We’re known as an industry leader, focusing on ...

    By JIUHE PIPE based in xingtai, CHINA.

  • GEROblanco - Solid PE-HD Pipes

    GEROblanco PE-HD pipes are designed for reliable pressure or gravity drainage with a light inner surface allowing for easy inspection. In the system, the all components are welded to each other. There are no damages as ingrown roots (incrustation), displacements or leakages. Installation must be done according to international standards in an open ...

    By Gerodur MPM Kunststoffverarbeitung GmbH & Co. KG based in Neustadt/Sachsen, GERMANY. from Solid PE-HD Pipes Product line

  • Gerodur - Model PE 100 - Conventional PE-HD Pipes

    Conventional PE-HD pipes for an reliable transport of supply and communication lines and protection against damaging environmental influences. Structure acc. to international standards. For a safely application > 100 years.

    By Gerodur MPM Kunststoffverarbeitung GmbH & Co. KG based in Neustadt/Sachsen, GERMANY. from Conventional PE-HD Pipes Product line

  • Multi-Seal - Model DN80 to DN300 - Socket Ends Resilient Seated Gate Valve for U-PVC and PE Pipe

    Multi-Seal Wedge Advanced Technology for absolute tight shut off and low torque operation. Wedge ductile iron GGG 50, encapsulated with EPDM. Low friction guides integrally vulcanized for security. Ductile iron GGG 50 body & bonnet - Coated 250 μmFBE. Body/bonnet bolts stainless steel, sealed with hot melt. Stem O rings replaceable under ...

  • SurePEX - Maximum Safety With Flexible Installation

    SurePEX–pipes made of cross-linked polyethylene (PE-Xa) are the safe solution for house connections. SurePEX–pipes are cross-linked via Engel process at more than 2.000 bar pressure directly during the extrusion in the amorphous phase. Due to this homogeneous method of cross-linking, SurePEX-pipes are resistant against stress cracks, ...

    By FRANK GMBH based in Mörfelden-Walldorf, GERMANY. from Maximum Safety With Flexible Installation Product line

  • Flange Connection Tite Liner

    Tite Liner flange fittings have been used since 1985 to provide a tight seal and restrained joint in pressures up to and over 5,000 psi.  Each raised face steel flange is machined to match the inside diameter of the steel pipe and inspected to verify that the raised face dimension is correct.  A radius that matches the radius of the ...

    By United Pipeline Systems based in Durango, COLORADO (USA).

  • Tite Liner - Drinking Water Pipe

    Much of the world’s drinking water pipeline infrastructure is long past its design life and in need of repair. Complete replacement of these pipes using conventional dig and replace solutions can be time consuming and very disruptive to traffic, citizens and the environment. These problems can easily be avoided by choosing Tite Liner® ...

    By Insituform Technologies, LLC based in Batesville, MISSOURI (USA). from Drinking Water Pipe Product line

  • Polyethylene Pipe Systems (PE)

    Fusion Marine has developed great expertise in the supply and installation of Polyethylene (PE) piping for hydro-electric schemes and other applications. PE piping offers several advantages over more traditional steel or GRP pipe. It is flexible and light, enabling the pipe to follow contours without the need for creating socket joins. Such joins ...

    By Fusion Marine Limited based in Scotland, UNITED KINGDOM.

  • Rolldown - Tight-Fit Polyethylene Lining

    PIM Corporation's Rolldown system uses standard polyethylene (PE) pipe to create a close-fitting liner within an existing pipeline. Rollers reduce the diameter of the PE pipe and allow it to be pulled through the host pipe. The liner is then pressurized to revert it to its original size. Rolldown can be designed as a stand-alone, fully rated ...

    By PIM Corporation based in Piscataway, NEW JERSEY (USA). from Tight-Fit Polyethylene Lining Product line

  • AGRULINE - Model PE 100 - Piping System

    This product range includes a wide selection of premium PE 100 products for gas and water supplies and for wastewater disposal. Besides our PE pipes, our PE 100 fittings, valves and special components offer a long service life and freedom from maintenance, particularly in this field of application.

    By AGRU Kunststofftechnik GmbH based in Bad Hall, AUSTRIA.

  • Mega-Therm - Model HDPE 100 - HD Polyethylene Pipes

    HD Polyethylene (HDPE 100) is considered as the most heavy duty amongst other types of pe pipes. Compared to PE80 & PE63, HDPE 100 is best used for water & gas mains with its maximum working pressure. It has enhanced toughness, higher permissible design strength and improved resistance to rapid crack propagation. “high ...

    By RHU Holding / Mega-Therm based in Iskenderun, TURKEY. from HD Polyethylene Pipes Product line

  • StormPipe - Drainage Pipe

    Structured-wall (corrugated outside, smooth inside) locally perforated (LP), totally perforated (TP) and multi-purpose (MP) SN 8 polyethylene (PE) pipe, according to DIN 4262-1, type R2,

    By FRÄNKISCHE Rohrwerke Gebr. Kirchner GmbH & Co. KG based in Königsberg, GERMANY. from Drainage Pipe Product line

  • Primus Line - Hose Assembly

    Outer Layer: Abrasion-resistant PE sheath. Fabric protection during insertion.

    By Rädlinger Primus Line GmbH based in Cham, GERMANY. from Hose Assembly Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you