PE Pipe Equipment Near Aruba
-
based in COLOMBIA
also recommended for the approximate range of works: 80% of plastic pipes installation up to Ø75mm, 20% of plastic pipes installation with smaller diameter. HP95R is designed for piercing and trenchless installation of PE & PCV pipes up to 75mm diameter. The installation method involves direct pulling of the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Stopper for installation of Diver communication cable in PE monitoring well pipe 32 x 25 ...
-
Manufactured by Lung Meng Machinery (USA), Inc.based in USA
Materials and applications for PP/PE/ABS/ PPR pipe etc. Low resistance melt flow to avoid negative influence on the material mixing action. Pipe thickness uniformity reduces the thickness of the ...
-
Manufactured by WaStop International ABbased in SWEDEN
WaStop PVC range is primarily used in sewer and odour applications. The PVC range is installed inline with the existing pipes using flexible couplings or slide couplings. WaStop PVC range is available from DN75mm (NPS 3″) up to DN 200mm (NPS 8″). For dimensions over this size PE or Stainless is ...
-
Manufactured by Netbor Plastik Boru A.Sbased in TURKEY
Polyethylene is a thermoplastic used in a wide variety of products. It takes its name from ethylene in monomer form, and polyethylene is produced using ethylene. In the plastic industry, its name is generally used as ...
-
Manufactured by Netbor Plastik Boru A.Sbased in TURKEY
Polyethylene pipes can be produced to be joined by butt welding method according to the characteristics of the project to be applied, but there are technical limitations far both welding diameter and wall ...
-
Manufactured by Netbor Plastik Boru A.Sbased in TURKEY
Polyeihylene is a Ihetmoplasiic used in a wide variety of ...
-
Manufactured by Cepexbased in SPAIN
Cepex offers two ranges of PP compression fittings: Performance Series and Standard Series. Both are made according to standards EN 712 / 713 / 715 / and ISO 3501 / 3503 / 3458 /3459, and are suitable for installation on PE pipes conforming to ISO 11922; DIN 8072 / 8074; and UNE 53131. These fittings allow for a quick, simple insertion of the ...
-
Manufactured by Sierra Environmental Technologies, LLCbased in USA
Sweet-Air PE-200 HDPE drum scrubber units are designed to provide the same adsorption functionality as larger units; but only on a smaller scale. The drums can be filled with media custom-selected to provide the maximum time on stream between changeouts and to deliver the optimum contaminant removal while in ...
-
Manufactured by Sierra Environmental Technologies, LLCbased in USA
SWEET-AIRE PE-500 MDPE drum scrubber units are designed to provide the same adsorption functionality as larger units; but only on a smaller scale. The drums can be filled with media custom-selected to provide the maximum time on stream between changeouts and to deliver the optimum contaminant removal while in ...
-
Manufactured by Sierra Environmental Technologies, LLCbased in USA
Sweet-Aire PE-300 MDPE drum scrubber units are designed to provide the same adsorption functionality as larger units; but only on a smaller scale. The drums can be filled with media custom-selected to provide the maximum time on stream between change outs and to deliver the optimum contaminant removal while in ...
-
Manufactured by Agru America, Inc.based in USA
Light, flexible and earthquake-proof, Sureline pipes ensure safe and reliable operation and can be used in sandbed-free installation sites. Made from PE 100-RC, Sureline pipes meet demanding applications. The pipe material is chemical resistant and weldable – providing decades of leak-free use. Sureline I ...
-
Manufactured by Agru America, Inc.based in USA
Manufactured of newest generation PPI and NSF listed material, Agru’s HDPE Pipe Fittings set the standard. All fittings meet the requirements of ASTM D3261, ASTM D2513, NSF 61, and AWWA C901 and C906. Corrosion and chemical resistant, Agru’s PE Pipe Fittings offer superior flow characteristics while being light weight and more ...
-
Manufactured by WIDOS Wilhelm Dommer Sohne GmbHbased in GERMANY
The WIDOS Maxiplast is a welding machine for the heating element butt welding of PE, PP and PVDF pipes and fittings from OD 50 to OD 160. Due to the compact and solid design, the machine is ideally suitable for the usage at places with difficult access under on-site conditions. For the stationary usage, an additional base frame is available ...
-
Manufactured by WIDOS Wilhelm Dommer Sohne GmbHbased in GERMANY
You are looking for a tool to remove the weld seam of PE- and PP-pipes? Then the WIDOS inside debeader is the right tool for you. The WIDOS inside debeader is designed for the weld seam removal of PE- and PP-pipes. The inside debeader 160 is suitable for ID 90 up to ID 160. The maximum insertion depth is 20 meters. The removal of ...
-
Manufactured by WIDOS Wilhelm Dommer Sohne GmbHbased in GERMANY
The WIDOS Miniplast/2 is a welding machine for the heating element butt welding of PE, PP and PVDF pipes and fittings from OD 20 to OD 110. Due to its light and compact construction, the machine is ideally suited for the use in pipeline systems and for assembly work. In case of stationary use, the machine can be fixed in the vice or with the ...
-
Manufactured by WIDOS Wilhelm Dommer Sohne GmbHbased in GERMANY
The WIDOS 4400 can be used to process pipes and fittings out of PE, PP, PA and PVDF from OD 50 up to OD 160. The WIDOS 4400 features a double clamping device with quick clamping on the fixed and on the movable side. These are guided by 2 shafts. There are 2 flexible hoses with quick-action couplings for the connection to the hydraulic control ...
-
Manufactured by WIDOS Wilhelm Dommer Sohne GmbHbased in GERMANY
You are looking for a heating element socket welding machine for the construction site and trench for PE-, PP- and PVDF- pipes and fittings from OD 20 up to OD 125? Then the WIDOS 3511 is the right machine for you. The WIDOS 3511 is developed for processing PE, PP and PVDF pipes and fittings from OD 20 up to OD 125. The machine ...
-
Manufactured by WIDOS Wilhelm Dommer Sohne GmbHbased in GERMANY
You are looking for a mobile manageable size machine for the heating element butt welding and socket welding up to OD 160 resp. OD 125? Then the WIDOS 2500 combi is the right machine for you. The WIDOS 2500 combi is a plastic welding machine for PE,- PP- and PVDF pipes and fittings from OD 20 up to OD 125 for the socket welding and from OD 50 ...
-
Manufactured by Briggs Irrigationbased in UNITED KINGDOM
Complete pipe systems and hydrants can be supplied with both underground and overground pipe choices. We manufacture fully galvanised in line hydrants compatible with modern PVC or PE pipes and fittings. PVC repair couplers stocked in sizes 110, 160 and 200mm. Bespoke hydrants, road crossings and fittings can be made on request. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you