penetrometer Equipment available in Netherlands Antilles

Available in Netherlands Antilles| Near Netherlands Antilles
65 Results found

We couldn't find any penetrometer equipment in Netherlands Antilles

Here is a list of results available in Netherlands Antilles

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: penetrometer ×

  • Available in: Latin America ×

  • Available in: Netherlands Antilles ×

AMS - Pocket Penetrometer

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

The AMS pocket penetrometer provides accurate measurements of the compressive soil strength. This 6-1/4in unit is spring-operated, and it is measures strength in tons/sq. ft. or kg/sq. cm by pushing a 1/4in diameter loading piston into soil to a depth of 0.25in. The end area is 0.05in2. Compressive load is indicated by reading a scale on the ...

Eijkelkamp - Pocket Penetrometer

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

The 'pocket penetrometer' is specifically used to determine the penetration resistance of top layers (measuring depth 5 mm) and of samples in the field or in the laboratory. Measuring range 0.5 MPa.

Pagani - Generalities System

by Pagani Geotechnical Equipment s.r.l.     based in Calendasco, ITALY

The geotechnical study of the ground for foundations problems, slope stability, support works, etc., nowadays finds more and more applications. The new laws and the technical and economical aspects of a project impose the preventive knowledge of the geotechnical characteristics of the ground.

Pagani - Model DPM30-20 - Penetration System

by Pagani Geotechnical Equipment s.r.l.     based in Calendasco, ITALY

30 kg drop hammer. Free fall heigt 200 mm. Special steel rods Ø 20 mm; L 1000 mm; Weight 2.4 kg. Cone tip Ø 35.6 mm; B 60°; A 10 cm².

Pagani - Automatic Self-Anchoring System

by Pagani Geotechnical Equipment s.r.l.     based in Calendasco, ITALY

Our Penetrometers are equipped with an automatic self-anchoring system that solves the problems often limit the diffusion of Static Penetrometer techniques, considered as one of the most valid In Situ Testings for a correct identification of Soil Mechanics Characteristics.

Pagani - Model TG63 - 100 - Penetration System

by Pagani Geotechnical Equipment s.r.l.     based in Calendasco, ITALY

Maximum working pressure [bar] 245, Pushing force [kN] 100, Pulling force [kN] 120, Downward unloaded rate [cm/sec] 0 ÷ 13, Upward unloaded rate [cm/sec] 0 ÷ 10, Stroke [mm] 1250.

Pagani - Model TG73 - 200 - Penetration System

by Pagani Geotechnical Equipment s.r.l.     based in Calendasco, ITALY

CPT: Maximum working pressure [bar] 220. Pushing force [kN] 200. Pulling force [kN] 250. Downward unloaded rate [cm/sec] 0 ÷ 16. Upward unloaded rate [cm/sec] 0 ÷ 11. Stroke [mm] 2000.

Pagani - Model TG63 - 150 - Penetration System

by Pagani Geotechnical Equipment s.r.l.     based in Calendasco, ITALY

CPT: Maximum working pressure [bar] 240. Pushing force [kN] 150. Pulling force [kN] 160. Downward unloaded rate [cm/sec] 0 ÷ 10. Upward unloaded rate [cm/sec] 0 ÷ 7.5. Stroke [mm] 1250.

Pagani - Model TG30 - 20 - Penetration System

by Pagani Geotechnical Equipment s.r.l.     based in Calendasco, ITALY

30 kg drop hammer. Free fall heigt 200 mm. Special steel rods Ø 20 mm; L 1000 mm; Weight 2.4 kg. Cone tip Ø 35.6 mm; B 60°; A 10 cm².

Pagani - Model Manual DP - Penetration System

by Pagani Geotechnical Equipment s.r.l.     based in Calendasco, ITALY

10 kg drop hammer. Free fall heigt 500 mm. Special steel rods Ø 22 mm; L 1000 mm. Cone tip Ø 35.6 mm; B 90°; A 10 cm².

AMS - Static Cone Penetrometer

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

Evaluate the consistency, compaction and bearing of fine grained, soft soils. The static cone penetrometer is used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement subgrades. Specifically developed for use in fine grained soils, particularly soft soils, to depths of 30'. ...

Hand Penetrometer for Top Layers

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

The hand penetrometer for top layers is a device that is used to determine the penetration resistance of top layers. Because of the limited overall length of the device, the hand penetrometer can also be used for horizontal measurement, for instance in the walls of profile pits.

AMS - Geo Tester Penetrometer

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

Geotester dial penetrometer set is used for on-site measurement of soil compaction by testing the foundation plane or boring samples. It gives readings of estimated unconfined compressive strength in TSF or kg/cm2 when used with the standard 1/4' dia plunger. The geotester is furnished with stainless steel plungers, carrying case, data tables, ...

Eijkelkamp - Hand Penetrometer Set A

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

The set with the hand penetrometer Eijkelkamp can be used for probing to a dept of 1 meter. The set contains various cones, probing- and extension rods, a measuring instrument with a pressure gauge, tool set, a cone check, a calibration certificate and an instruction manual. The measuring range of the pressure gauge is 10000 kN/m2 (=10000 kPa).

AMS - Dynamic Cone Penetrometer

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

The most widely accepted, portable method for evaluating strength and density of soil, in situ. The dynamic cone penetrometer uses a 15 lb. (6.8 kg) drive mass falling 20 in. (50.8 cm) that strikes the anvil to cause penetration of 1.5 in (3.8 cm) diameter cone (45 degree vertex angle) that has been seated in the bottom of a pre-augered hole. The ...

Model K19500 - Penetrometer

by Koehler Instrument Company Inc     based in Bohemia, NEW YORK (USA)

Penetration tests are performed on petroleum products to determine consistency and shear stability (lubricating greases) for design, quality control and identification purposes. A standard cone or needle is released from a penetrometer and allowed to drop freely into the sample for 5 seconds (or a different specified interval) at constant ...

Lubrication Module

by Lankelma     based in Iden, UNITED KINGDOM

This in-house development by Lankelma has proven a success in reducing the friction between the CPT rods and soil during testing in very cohesive materials. This has allowed Lankelma to push to much greater depths, avoiding the need to use more expensive and time-consuming drilling techniques.

Electric Conductivity Cone

by Lankelma     based in Iden, UNITED KINGDOM

The electric conductivity cone measures the subsoil electrical conductivity, dielectric properties and temperature with depth. This cone has applications in the identification of water content, the thickness of the zone of capillary ascent and in particular, the degree of contamination. Contamination is recognised through evaluating soils ...

Full Displacement Cone Pressuremeter

by Lankelma     based in Iden, UNITED KINGDOM

The full displacement pressuremeter, or pressuremeter cone, is a device designed to apply a uniform pressure to the walls of the hole by means of a flexible expanding membrane. This in-situ test measures both soil strength and stiffness parameters at strain levels as low as 0.01%. The pressuremeter is comprised of a pair of calibrated strain arms ...

Video Cone

by Lankelma     based in Iden, UNITED KINGDOM

Lankelma’s video cone penetrometer with a recording camera element allows both us and our clients to get a closer look at the geology. The video cone is designed as a standard cone capable of measuring tip and friction sleeve resistance, with the addition of a camera located behind the cone. Sitting behind a sapphire window with adjustable ...

Need help finding the right suppliers?

Let the XPRTs do the work for you