photovoltaic Equipment available in Sierra Leone

Available in Sierra Leone| Near Sierra Leone
973 Results found

We couldn't find any photovoltaic equipment in Sierra Leone

Here is a list of results available in Sierra Leone

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: photovoltaic ×

  • Available in: Africa ×

  • Available in: Sierra Leone ×

TROSIFOL - Model R40 - Solar PVB Films

by Kuraray Europe GmbH - Division Trosifol     based in Troisdorf, GERMANY

TROSIFOL SOLAR R40 and all other TROSIFOL SOLAR PVB films are distinguished by their outstanding visual properties. For decades now, PVB has been the preferred plastic for safety glazing. These properties, combined with proven high long-term stability in outdoor applications even in non-edge-protected glazing, assure module manufacturers of the ...

TROSIFOL - Model SOLAR UV+ - PVB Encapsulation Film

by Kuraray Europe GmbH - Division Trosifol     based in Troisdorf, GERMANY

TROSIFOL SOLAR UV+ is a ground-breaking PVB encapsulation film with a modified formulation. This highly transparent film with outstanding UV transmittance increases the energy yield of crystalline UV-selective solar cells and CIS/CIGS thin-layer solar modules still further. The film shows excellent resistance to heat, UV radiation and other ...

Model GlueMaster - Gluing Station

by Diamond Wire Material Technologies (DMT)     based in Colorado Springs, COLORADO (USA)

The GlueMaster is an independent gluing station available in five configuration levels/expansion stages. The GlueMaster 1 offers an adjustable mixing and dosing unit to apply the glue onto the workpiece holder, glass beam and bricks. Compared to manual glueing, this process saves in average 50 per cent of the glue.

Model HE-WU-01 - Wet Bench Unloader

by Diamond Wire Material Technologies (DMT)     based in Colorado Springs, COLORADO (USA)

The Hennecke Wet Bench Unloader is the perfect tool for an inline wafer production. The cleaned and dried wafer are provided on a multi track belt system. It softly picks up each wafer from the tracks and supplies them one by one to the measuring system. It uses a newly developed gripper which is made of the material PEEK. This is a certified ...

Laser Drilling of Glass

by 4JET Technologies GmbH     based in GERMANY

A new product by 4JET allows the cost-efficient, flexible and material friendly drilling of glass in the solar-, display- and other industries. The new GDS systems allow inline processing of glass panels in a fully automated and highly flexible setup.Other than conventional mechanical processes, laser drilling provides for a touchless and dry ...

Model BM 860 - Brick Master

by Diamond Wire Material Technologies (DMT)     based in Colorado Springs, COLORADO (USA)

The BrickMaster BM 860 belongs to the newest generation of bricking solution. It can handle G6 (1000 x 1000 mm) as well as 6” and 8” mono c-Si. The maximum work piece amounts 550 mm. The use of diamond wire doubles the output compared to slurry-based bricking. The G6 format increases the output by an additional 40% (multi ...

TRINA - Model TSM-DC01, 165W to 180W - Solar Photovoltaic Module

by Enereco S.r.l.     based in Sarcedo, ITALY

Strenghts: Tolerance ± 3%. High Efficiency cells. Plug & Play connectors. Hight Transmission, low iron. Tempered glass.

Jonas & Redmann - Model WIS - Wafer Inspection System

by Jonas & Redmann Group GmbH     based in Berlin, GERMANY

The term wafer is used to describe a sawn silicon panel, which forms the base component in the manufacture of a solar cell. The quality of the wafer is crucial for the effectiveness of the future solar cell; damaged and faulty wafers must be picked out. Jonas & Redmann designs, develops and manufactures systems for quality control and ...

GEROLD - Model c-Si - Crystalline Silicon Photovoltaic

by Maschinenbau GEROLD GmbH & Co. KG     based in Nettetal, GERMANY

GEROLD supplies process tools and backend-lines for c-Si -module production.

Gamesa - Model E-1.25 MW - Inverters

by Gamesa     based in Madrid, SPAIN

Hybrid water and air cooling technology enhances operational temperature range: up to 122ºF (50ºC) without de-rating and up to 149ºF (65ºC) before shut-down. Easy to transport and to install: compact solution housed in a 20 ft. container. Two independent Max Power Point Trackers (MPPT) which optimize the energy harvesting and ...

Jonas & Redmann - Model WHD - Water Handling Diffusion System

by Jonas & Redmann Group GmbH     based in Berlin, GERMANY

The positively charged wafers are handled in a diffusion furnace with phosphoric gas. At furnace temperatures of approx. 800-900 °C phosphorus atoms are diffused into the waver’s surface. Doping occurs and creates a negatively charged surface layer. The wafer then has two different layers: the negatively charged layer and below that the ...

Cometi - Model 6000-E - Shelter

by Cometi S.p.a.     based in Sansepolcro, ITALY

External dimensions (LxWxH): 2500 x 6000 x 2800 mm.The shelter is to design to house the control panels and users equipments for photovoltaic system with power up to 200/300 kWp, it has openings for natural ventilation and/or forced ventilation, electrical system, internal lighting, service outlets, alarms and various accessoires.The shelter can ...

PLASMA - Model PECVD - Batch Type System

by centrotherm photovoltaics AG     based in Blaubeuren, GERMANY

Batch-type system for passivation and nitride coating in c-Si solar cell processing. centrotherm is the world market leader in the field of Plasma Enhanced Chemical Vapor Deposition (PECVD) for passivation and anti-reflective coating processes in the manufacturing of c-Si solar cells.

Model DW 288 - Diamond Wire Saw

by Diamond Wire Material Technologies (DMT)     based in Colorado Springs, COLORADO (USA)

Diamond wire technology is a must for any manufacturer of monocristalline wafers who wants to achieve the highest wafer quality at the lowest possible costs and the highest possible yield. With its DW 288, Meyer Burger offers the first diaomond wire saw that has been developed exclusively for this slicing technology. Like no other diaomond wire ...

Model DS 271/264 - Diamond Wire Saw

by Diamond Wire Material Technologies (DMT)     based in Colorado Springs, COLORADO (USA)

Customers looking for a multi-talented solution need look no further than the DS 271 or the DS 264. Both machines set the benchmarks for wafer sawing using slurry technology, e.g. for the slicing of multicrystalline silicon bricks. However, they can also be converted easily to the diamond wire process. Whether with diamond wire or slurry, the user ...

Enereco - Photovoltaics Street Lamps for Decorative & Public Lighting

by Enereco S.r.l.     based in Sarcedo, ITALY

To plan a well working street lighting system with photovoltaic power supply means to consider some basic elements such as: BUDGET. The whole system must be both economical and able to compete with traditional solutions connected to the electricity network (not always at hand).

Photovoltaic Noise Barriers

by FAR Systems S.p.A.     based in Rovereto, ITALY

Far Systems produces road noise barriers using photovoltaic panels, thus combining the advantages of energy production with a low environmental impact and the noise absorption function of the barrier.

GEROLD - Model TFPV - Thin-Film-Photovoltaic

by Maschinenbau GEROLD GmbH & Co. KG     based in Nettetal, GERMANY

Frontend automation: Clean room suitable belt and roller conveyors. Automation, including process equipment handshakes. Accumulator & Buffer systems - integrated production. Carts & Auto-loader - non-integrated production.

Molybdenum Exposure on CIGS Solar Panels

by 4JET Technologies GmbH     based in GERMANY

During the production of CIGS and similar thinfilm solar cells the molybdenum layer covering the glass has to be exposed in selected areas in order to prepare for welding or glueing processes. This requires removal of the only several hundred nanometers thick semiconductive layers without damaging the metal layer underneath. 4JET´s ...

Model 4JET - Laser Edge Deletion of Thin Film Solar Cells

by 4JET Technologies GmbH     based in GERMANY

Our systems for laser edge deletion of thinfilm solar panels offer numerous advantages over mechanical sandblasting or the use of grinding wheel technology.Touchless process without glass damage or micro cracks. Dry process without blasting grid or chemicals, less waste Volume, more environmentally friendly. Effective ablation of TCO, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you