We couldn't find any pipe liner equipment suppliers or service providers located in Nunavut

Here is a list of equipment results with suppliers serving Nunavut

pipe liner equipment available in Nunavut

  • Premium

    AMS - Gas Powered Core Sampling Kit

    The AMS Gas Powered Core Sampling Kit with gasoline powered Gas Powered REDI Boss Hammer is ideal for obtaining core samples to a depth of 8ft. (2.4m). The complete set contains: Gas Powered REDI Boss Hammer, (1) 4ft. Deluxe AMS Carrying Case, (1) 3ft. Deluxe AMS Carrying Case, GP Slotted Sampler Tube 4ft., (2) GP Upper Extensions 2ft., (2) GP ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Gas Powered Core Sampling Kit Product line

  • KMG - Model RIBLINE™ - Meter of Joint Less Spiral Pipe

    The Ribline System consists of a single strip of steel reinforced HDPE which is progressively wound into the existing pipeline by the Ribline machine which is positioned in the base of the access chamber. The edged of the profile are welded together by the Ribline machine forming a continuous watertight liner. The fully encapsulated steel ...

    By KMG Pipe Rehabilitation Emirates L.L.C. based in Abu Dhabi, UNITED ARAB EMIRATES. from Meter of Joint Less Spiral Pipe Product line

  • CIPP - Felts Liner

    Applied Felts, a pioneer in the CIPP process, custom-produces felt liners to meet exacting conditions for pipes ranging from 3' to 120' in diameter. Applied Felts works closely with its customers to assess their unique job conditions and requirements. They then select the exact polymer granules and felt fibers that best suit each job and ...

    By CIPP Corporation, Inc. based in Hudson, IOWA (USA). from Felts Liner Product line

  • BRAWOLINER - Model RR Series - Extra Quick Hardening Epoxy Resin

    BRAWO RR is the extra quick-hardening 2K- epoxy resin of BRAWOLINER®. By a bundle size of 1.5 kg and a hot curing time of just 75 minutes it allows an economic renovation with hat profiles, connection cuffs and short liners. Of course BRAWORR is also suited for ambient curing beginning from 5°C. Like the proven BRAWO resins BRAWO RR can be ...

  • Model 14M - Butt Fusion System

    The Connectra 14M Butt Fusion System is designed for quick and accurate joining of 3/4” CTS through 4” DIPS polyethylene pipe and valves and fittings, including 25-110mm, using the butt fusion process. Easy-to-use snap-in liners reduce the clamps to the smaller pipe sizes. The joining assembly, heater and facer can be used in the ...

    By Tric Tools, Inc. based in Alameda, CALIFORNIA (USA). from Butt Fusion System Product line

  • Maxi Power Plus - Pipe Cutter

    Smart Cutter™ DN100 - DN300 / 4”-12”. The award-winning Smart Cutter but bigger. New lightweight hubs with 6 or 8 side grinding panels. Hollow hub and shortened panels keep the weight down for larger tools. Make rein-statements and remove inconsistencies, wrinkles and collapsed liner faster than ever before. Special adapter ...

    By Picote Solutions based in Anderson, SOUTH CAROLINA (USA). from Pipe Cutter Product line

  • Durcor - Advanced Composite PTFE Lined Piping System

    Durcor is the world's first advanced structural composite piping system lined with seamless PTFE. Its thick wall PTFE liner provides maximum internal chemical resistance while Durcor's vinyl ester resin backbone eliminates the devastating effects of environmental corrosion externally.

    By PureFlex, Inc. based in Kentwood, MICHIGAN (USA). from Advanced Composite PTFE Lined Piping System Product line

  • Dancutter - Model DC 160 - Reinstatement Cutter

    The cutter is used in pipes as sewer pipes, water pipes, ventilation shafts, oil pipes etc. in sizes from 90mm to 250mm. The cutter is used in pipes as sewer pipes, water pipes, ventilation shafts, oil pipes etc. in sizes from 190mm to 700mm. By relining an existing pipe with a liner the cutter is used to reopen laterals. DC 160 is also used to ...

    By Perma-Liner Industries, LLC. based in Clearwater, FLORIDA (USA).

  • Model MFT & MWT Series - Single Tied Metal Expansion Joints

    These expansion joints are made of one single bellows element with end connections plus a tie rod system. Regardless of accessories, such as liners and covers, this model absorbs all of the movements in any one length of piping but it is mainly used to absorb axial movements and small amounts of lateral movement.

    By Macoga, S.A based in Ordes (A Coruña), SPAIN. from Single Tied Metal Expansion Joints Product line

  • ACR - Model Magna-Skin™ - Magnetic Wear Liners

    ACR’s Magna-Skin™products provide innovative solutions to many wear related problems using magnetic technology. From our Magna-Patch™ line of temporary repairs to pipes & steel equipment to ourMagna-Skin™ magnetic wear liners for easy change out of chutes, bins, hoppers and other areas requiring protection.

    By ACR Group Inc. based in Nisku, ALBERTA (CANADA). from Magnetic Wear Liners Product line

  • Kenway - Fiberglass Ducts & Fiberglass Vents

    As with its process pipe manufacturing, Kenway also custom designs its duct and vent piping systems to suit each application.  For highly corrosive applications or abrasive applications, we provide specialty liners.  Our products meet or exceed Class I Fire Retardant ratings per ASTM E-84 and can achieve smoke spread ratings less than 50 ...

    By Kenway Corporation based in Augusta, MAINE (USA).

  • Flange Connection Tite Liner

    Tite Liner flange fittings have been used since 1985 to provide a tight seal and restrained joint in pressures up to and over 5,000 psi.  Each raised face steel flange is machined to match the inside diameter of the steel pipe and inspected to verify that the raised face dimension is correct.  A radius that matches the radius of the ...

    By United Pipeline Systems based in Durango, COLORADO (USA).

  • Beirens - Single and Double-Wall Modular Flue and Chimney Systems

    Our single and twin wall modular flue and chimney systems are suitable for evacuating gases from boilers running on gas, fuel oil, wood and coal. They can be used in many types of applications: ideally suited for domestic, commercial and industrial schemes, the flues can be located internally or externally, and for both new build and renovation ...

    By Beirens SAS based in BUZANCAIS, FRANCE. from Single and Double-Wall Modular Flue and Chimney Systems Product line

  • PolySpray - Model FS-250 - Polyurea Based Linings

    PolySpray FS-250 is a spray applied, rapid curing, RIGID liner that displays superior physical properties, high chemical resistant, abrasion resistance and a high degree of toughness. PolySpray FS-250 has been designed to exceed all physical properties required by ASTM F1216 for the rehabilitation of existing pipelines. Exceeding these ...

    By HydraTech Engineered Products, LLC based in Cincinnati, OHIO (USA).

  • Haline Tefline - Fluoropolymer Lined FRP Piping System

    Our Fluoropolymer Lined FRP piping System utilize a fluoropolymer liner externally warapped with an FRP structural laminate. The fluorpolymer liner has a glass fabric embedded into it's exterior surface to ensure the FRP liminate is bonded to the liner fabricated in pressure ratings from 25 to 150 psi.

    By Fabricated Plastics Limited based in Maple, ONTARIO (CANADA).

  • Flow-Liner - Pipe Lining System

    The Flow-Liner Sectional Pipe Lining System versatile process is approved by government agencies world wide for rehabilitation of sewer pipelines without excavation. This trenchless repair method can be performed in as little as 2 hours and in most cases does not require by-pass pumping. Our technical field staff can provide multiple sectional ...

    By Flow-Liner Systems, Ltd. based in Columbus, OHIO (USA). from Pipe Lining System Product line

  • Fiberstrong™ - Pipe

     Fiberstrong is a corrosion-resistant pipe system which can be used in a wide range of applications for both aboveground and underground installations.Developed by Future Pipe Industries (FPI), Fiberstrong™ pipes are manufactured from a thermosetting resin, polyester or vinylester and are reinforced by fiberglass using a precise ...

    By Future Pipe Industries (FPI) based in Barcelona, SPAIN. from Pipe Product line

  • GRP Dual Laminate Piping Systems

    In addition, Plasticon Composites manufactures and installs thermoplastic lined FRP (dual laminate) pipes for aggressive products such as chlorine gas, hydrochloric acid, sodium hypochlorite and caustic soda. Plasticon Composites have combined various thermoplastic and fluoropolymer liners (PVC, C-PVC, PP, PE, PVDF, E-CTFE, FEP, PFA, MFA) with ...

    By Plasticon Composites International Contracting B.V. (PCIC) based in Hengelo (OV), NETHERLANDS.

  • Insta-Liner - Pipe or Culverts

    The Link-Pipe Insta-Liner™ is designed for end-to-end relining for extensively damaged and eroded pipe or culverts. The Insta-Liner forms a merged structure with a damaged or eroded host pipe, and in turn produces a new pipe - even where the host pipe is missing/damaged. After the Insta-Liner is used, it results in a strong and durable ...

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA). from Pipe or Culverts Product line

  • Nu- Drain - Non-Pressurized Epoxy Lining (CIPP)

    The (CIPP) cured in-place pipe restoration process is an economical and efficient alternative to traditional pipe system replacement. Our CIPP lining technology allows us to restore and Re-Nu aged, corroded piping systems to a “better than new” condition without removing them. The epoxy liner installed to the pipes’ interior ...

    By Nu Flow Corporate based in San Diego, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you