pipe liner equipment in Ontario

  • Challenger - Model 2000 - High Density Polyethylene Liner Pipe (HDPE)

    This specification covers the general requirements of corrugated high density polyethylene pipe (HDPE) with a smooth interior for use in culverts, municipal drainage and related engineering applications.

    By Ideal Pipe based in Thorndale, ONTARIO (CANADA).

  • Insta-Liner - Pipe or Culverts

    The Link-Pipe Insta-Liner™ is designed for end-to-end relining for extensively damaged and eroded pipe or culverts. The Insta-Liner forms a merged structure with a damaged or eroded host pipe, and in turn produces a new pipe - even where the host pipe is missing/damaged. After the Insta-Liner is used, it results in a strong and durable ...

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA). from Pipe or Culverts Product line

  • Haline Tefline - Fluoropolymer Lined FRP Piping System

    Our Fluoropolymer Lined FRP piping System utilize a fluoropolymer liner externally warapped with an FRP structural laminate. The fluorpolymer liner has a glass fabric embedded into it's exterior surface to ensure the FRP liminate is bonded to the liner fabricated in pressure ratings from 25 to 150 psi.

    By Fabricated Plastics Limited based in Maple, ONTARIO (CANADA).

  • Bluekor - Polypropylene-Lined FRP Piping System

    Our Polypropylene-Lined FRP Piping System utilizes . Polypropylene Liner externally   armoured with an FRP Structural Laminate. The Polypropylene Liner has .1 Glass Fabric embedded into its exterior surface to ensure the FRP Laminate is Bonded to die Liner Joiningof the Liner is performed by Butt-Fusion. Fabricated in pressure ratings from 25 ...

    By Fabricated Plastics Limited based in Maple, ONTARIO (CANADA).

  • EndSealer - Sleeves

    Link-Pipe EndSealer sleeves have been used to restore the liner end to its proper shape and to permanently seal any infiltration that may seep in from the small space between the liner and the host pipe.

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA).

  • Nu- Drain - Non-Pressurized Epoxy Lining (CIPP)

    The (CIPP) cured in-place pipe restoration process is an economical and efficient alternative to traditional pipe system replacement. Our CIPP lining technology allows us to restore and Re-Nu aged, corroded piping systems to a “better than new” condition without removing them. The epoxy liner installed to the pipes’ interior ...

    By Nu Flow Corporate Office in Oshawa, ONTARIO (CANADA).

  • Model CIPP - Hybrid System

    CIPP liners can be one or more of the following: Infiltration through CIPP ends. Infiltration through tapped (cut) service lateral (where groundwater seeps from the crack location or leaked joint and find its way between the liner and the host pipe to reach the service lateral opening). Infiltration originated from an abandon service lateral.

    By Link-Pipe Inc. based in Richmond Hill, ONTARIO (CANADA).

  • CHEMPLAST - Lined Steel Systems

    We proudly offer reliable, corrosion resistant piping products (spools, fittings, valves, bellows etc.) for the chemical, petrochemical, pharmaceutical, power, refining, pulp and paper, water-treatment and metal processing industries: Chemplast pipe liners are chemically inert to all known industrial chemicals; The product offers outstanding ...

    By Quadrant EPP UK Ltd. Office in Guelph, ONTARIO (CANADA). from Lined Steel Systems Product line

  • Greyline - Model PTFM 1.0 - Portable Transit Time Flow Meter

    Recommended for fluids like water, glycol, oils and chemicals. Use it for calibrations, troubleshooting, flow surveys and as a temporary transmitter to replace inline flowmeters. The PTFM 1.0 ultrasonic transducers strap-on the outside of pipes from ½' to 48' (12 to 1200 mm) diameter. The ultrasonic signal works through common pipe ...

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA). from Portable Transit Time Flow Meter Product line

  • Model CORD - Corporation Reinstatement Device

    Aries CORD is designed to be used for the following functions in conjunction as a stand alone unit or with Aries Pathfinder Pan and Tilt Camera System in water pipes during the rehabilitation process: Locate water connections (corporations) on the water main being rehabilitated. Plug the connections prior to rehabilitation process. Locate ...

    By Aries Industries, Inc. Office in Vaughan, ONTARIO (CANADA). from Corporation Reinstatement Device Product line

  • IC Controls - Model 647 - pH Sensor

    This sensor is designed to survive in sulfides, cyanides and ammonia environments often found in Mines, Concentrators and Refineries. It is bigger and more rugged (shown in the left and right) than a conventional pH sensors (shown in the middle) and lasts 3 to 5 times longer. The patented 'solid polymer' pH reference design is used to give fast ...

    By IC Controls Ltd. based in Orangeville, ONTARIO (CANADA). from pH Sensor Product line

  • Premium

    AMS - Gas Powered Core Sampling Kit

    The AMS Gas Powered Core Sampling Kit with gasoline powered Gas Powered REDI Boss Hammer is ideal for obtaining core samples to a depth of 8ft. (2.4m). The complete set contains: Gas Powered REDI Boss Hammer, (1) 4ft. Deluxe AMS Carrying Case, (1) 3ft. Deluxe AMS Carrying Case, GP Slotted Sampler Tube 4ft., (2) GP Upper Extensions 2ft., (2) GP ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) Distributor in Guelph, ONTARIO (CANADA). from Gas Powered Core Sampling Kit Product line

  • Model 14M - Butt Fusion System

    The Connectra 14M Butt Fusion System is designed for quick and accurate joining of 3/4” CTS through 4” DIPS polyethylene pipe and valves and fittings, including 25-110mm, using the butt fusion process. Easy-to-use snap-in liners reduce the clamps to the smaller pipe sizes. The joining assembly, heater and facer can be used in the ...

    By Tric Tools, Inc. Distributor in Vaughan, ONTARIO (CANADA). from Butt Fusion System Product line

  • Electromagnetic Flowmeters

    Electromagnetic flowmeters from ABB are in their element whenever the flowrate of conductive liquids, slurries or sludges is to be measured. A comprehensive range of product lines and models cover just about every application. The modular designs offer the industry’s widest range of liners, electrodes, and sizes to meet the needs of the most ...

    By ABB Measurement Products Distributor in Alliston, ONTARIO (CANADA). from Electromagnetic Flowmeters Product line

  • Smooth Cor - Corrugated Metal Pipe

    Smooth Cor is a CMP pipe with a hydraulically smooth steel liner coated with polymer coating. This combination makes Smooth Cor Pipe the economical and performance alternative to reinforced concrete pipe in difficult situations such as weak soils, poor subsurface drainage conditions, steep slopes, and high fills.

    By Contech Engineered Solutions LLC Distributor in Markham, ONTARIO (CANADA). from Corrugated Metal Pipe Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you