pipe sealing equipment in USA

  • Premium

    Proco - Pipe Penetration Seals

    The Proco Pen-Seal is designed to provide a gas and water-tight seal. All sizes have been tested to withstand a hydrostatic seal up to 20 psig or 40 feet of head pressure, in addition to withstanding temperatures up to 250 °F. The Pen-Seal’s standard elastomer material is EPDM, but a Nitrile material is available if the seal may come in ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Pipe Penetration Seals Product line

  • Premium

    Shand & Jurs - Model 93603 - Liquid Seal

    The Shand & Jurs Model 93603 Liquid Seal is used with liquid level gauges to retain tank vapor space pressure and vacuum. It is also used as a barrier to protect the gauge head from corrosive tank vapors or other effects. The construction of the liquid seal features aluminum housings, galvanized iron pipe, Delrin tape pulleys that rotate on ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Liquid Seal Product line

  • Premium

    Viscotaq ViscoSealant - Sealing Above-Ground Flanges

    With its cartridge-dispenser system, ViscoSealant delivers a simple method for sealing above-ground flanges and gaps in tank chimes and for waterproofing cable and pipe penetrations. It has the same advanced chemistry as the other Viscotaq products, meaning this formulated polymer retains permanent wetting characteristics, allowing the viscous ...

    By InduMar Products, Inc. based in Houston, TEXAS (USA). from Sealing Above-Ground Flanges Product line

  • Premium

    Procon - Model Series 190-D - Rubber Navy Sleeve Type Pipe Connector

    The Proco Series 190-D Rubber Navy Sleeve Type Pipe Connector is constructed of neoprene rubber, are reinforced with impregnated woven nylon and come with an aluminized glass outer cover (meets Mil-E-15330 Class B specifications). Sealing beads are molded on the interior of the sleeve to provide extra sealing action for the clamping area. Internal ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Rubber Navy Sleeve Type Pipe Connector Product line

  • Cretex - Internal Joint Seal

    Stop ground-water infiltration and increase water treatment capacity in underground pipes with Cretex’s Internal Pipe Joint Seals. These internal joint seals provide a compression seal that is watertight. The Internal Joint Seals are watertight compression seals that reduce groundwater infiltration, increasing waste-water treatment capacity ...

    By Cretex Specialty Products based in Waukesha, WISCONSIN (USA).

  • Premium

    Proco - Model Style 9013-ET - Low Torque EPDM Gasket

    The Proco 9013-ET Low Torque EPDM Gasket is fully molded for precise sizing, and is manufactured with the PTFE film bonded directly to the EPDM rubber gasket. A unique outer sealing ring around each bolt hole is added for additional sealing safety. These special gaskets are for use on plastic, fiberglass, glass or other piping systems which ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Low Torque EPDM Gasket Product line

  • Premium

    WATERSTOP - Model XP - Active Polymer Waterproofing Membrane

    The next generation of waterstop that expands upon contact with water to form a positive seal to stop water ingress through cast-in-place concrete construction joints and around pipe penetrations. Through the use of the patented XP technology, WATERSTOP® XP is proven effective in a wide range of contaminated environments.

  • Premium

    Proco - Model Style 9013-EP - Low Torque EPDM Gasket w/Peroxide Cure

    The Proco 9013-EP Low Torque Gasket is fully molded for precise sizing, and is manufactured with the PTFE film bonded to the EPDM rubber gasket. A unique outer sealing ring around each bolt hole is added, for additional sealing safety. These special gaskets are for use on plastic, fiberglass, glass or other piping systems which require minimal ...

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Low Torque EPDM Gasket w/Peroxide Cure Product line

  • Model CCES Series - Casing Spacers End Seals

    Casing spacer end seals shall be a pull-over type construction and made from Neoprene with T-304 stainless steel bands for securing the ends of the end seal to the casing pipe and carrier pipe. Casing spacer end seals shall be Model CCES as manufactured by Cascade Waterworks Mfg. Co. of Yorkville, IL or approved equal.

    By Cascade Waterworks Manufacturing Company based in Yorkville, ILLINOIS (USA). from Casing Spacers End Seals Product line

  • NO-DIG - Pipes

    Hgh strength,  corrosion-resistant  clay pipe. Resilient gasket buffer between the collar and pipe. Resilient gasket forms watertight seal. Compression disc to distribute the jacking forces. 316 stainless steel collar compresses gasket and resists shear and corrosion.

    By The Logan Clay Products Company based in Logan, OHIO (USA).

  • Model BP - Well Seal

    Available for 4”, 5”, 6”, 8”, 10”, 12”, and 14” well casing. Two (2) side opening for wires or additional pipe. O-Ring sealed in the ID of WELL SEAL and drop pipe. 4”, 5” and 6” are constructed from lightweight high strength aluminum alloy. 8”, 10”, 12” and 14” are ...

    By Western Rubber & Manufacturing based in Conroe, TEXAS (USA).

  • Simflo - Booster Can Pumps

    The discharge head shall be of ASTM A48, Class 30 Cast Iron or ASTM A53, grade B Fabricated Steel designed for above ground discharge with sufficient strength and rigidity to support the motor mounted on it and carry the suspended weight of the attached column and bowl assemblies. If fabricated steel, a radius or three-piece mitered type elbow ...

    By Simflo Pumps Inc based in Willcox, ARIZONA (USA).

  • Simflo - Short Coupled Pumps

    The discharge head shall be of ASTM A48, Class 30 Cast Iron or ASTM A53, grade B Fabricated Steel designed for above ground discharge with sufficient strength and rigidity to support the motor mounted on it and carry the suspended weight of the attached column and bowl assemblies. If fabricated steel, a radius or three-piece mitered type elbow ...

    By Simflo Pumps Inc based in Willcox, ARIZONA (USA).

  • Flange Connection Tite Liner

    Tite Liner flange fittings have been used since 1985 to provide a tight seal and restrained joint in pressures up to and over 5,000 psi.  Each raised face steel flange is machined to match the inside diameter of the steel pipe and inspected to verify that the raised face dimension is correct.  A radius that matches the radius of the ...

    By United Pipeline Systems based in Durango, COLORADO (USA).

  • Model 481 - Steel Pipe End Caps

    Steel end cape are easy to remove, reinstall and block. Perfect for line testing and dependable for pipe-end sealing.

    By Smith-Blair, Inc. based in Texarkana, ARKANSAS (USA). from Steel Pipe End Caps Product line

  • COMPAKT - Seals Made Sealing System

    The COMPAKT Design Seals Made sealing system is specially engineered to unique construction site challenges. It provides excellent sealing performance in wall openings for gas, water and sewage pipes, and various types of cables. The COMPAKT seal is a pressure-tight system. The COMPAKT Special Design Seals system fits to eccentric pipe dimensions ...

    By GPT, a division of EnPro Industries based in Wheat Ridge,, COLORADO (USA). from Seals Made Sealing System Product line

  • LMK T-Liner - Gasket-Sealing

    LMK’s T-Liner is a one-piece homogenous main and lateral CIPP connection liner. T-Liner has a uniform wall thickness and incorporates compressible material at the upstream and downstream ends creating a smooth tapered transition to the host pipe. Both the mainline and lateral sections are formed as a structural cylinder that renews 18-inches ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from Gasket-Sealing Product line

  • Wrap-It Link - Wall Penetration Seals

    This versatile sealing link system can be utilized to seal the annular space of carrier pipe and casing pipe applications as well as wall penetrations of piping system.

    By CCI Pipeline Systems based in Breaux Bridge, LOUISIANA (USA).

  • Internal Pipe and Manhole Joint Seals

    The NPC Internal Joint Seal economically eliminates groundwater infiltration from offset, corroded, cracked or deflected pipe joints and manhole barrel joints.

    By Prime Line Products, Inc based in Altamonte Springs, FLORIDA (USA). from Internal Pipe and Manhole Joint Seals Product line

  • INNERLYNX - Penetration Seals

    INNERLYNX forms a mechanical seal between pipes going through walls, floors, vaults, tanks and pipeline casings. Besides being designed to form a hydrostatic seal of up to 40 PSIG and up to 96 feet of head pressure, INNERLYNX helps absorb vibrations, shocks, and sound waves. Being non-conductive, INNERLYNX electrically insulates the inner carrier ...

    By Advance Products & Systems, Inc. based in Scott, LOUISIANA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you