pipe sealing equipment in Georgia (US)

  • Premium

    Proco - Pipe Penetration Seals

    The Proco Pen-Seal is designed to provide a gas and water-tight seal. All sizes have been tested to withstand a hydrostatic seal up to 20 psig or 40 feet of head pressure, in addition to withstanding temperatures up to 250 °F. The Pen-Seal’s standard elastomer material is EPDM, but a Nitrile material is available if the seal may come in ...

    By Proco Products, Inc. Office in Atlanta, GEORGIA (US) (USA). from Pipe Penetration Seals Product line

  • Simmons - Single Drop Pipe Eye Bolt Well Seal

    Class 25 Non-toxic lead free painted cast iron. Zinc plated steel bolts. Single Hole. 3/4″ molded rubber, 50 durometer.

    By Simmons Manufacturing Company based in McDonough, GEORGIA (US) (USA). from Single Drop Pipe Eye Bolt Well Seal Product line

  • Simmons - Double Drop Pipe Split Top Well Seal

    Class 25 Non-toxic lead free painted cast iron.Zinc plated steel bolts.Double Hole. 3/4″ molded rubber, 50 durometer.

    By Simmons Manufacturing Company based in McDonough, GEORGIA (US) (USA). from Double Drop Pipe Split Top Well Seal Product line

  • By-Pass Pipe Systems

    By-pass pipe ensuring pressure balancing of upstream and downstream side before main inlet valve opening, equipped with hydraulically or electrical controlled valve and manual-operated valve as back-up. Necessary sealing, fittings and connection material are included. Tubes and flanges are made of steel, hot dip galvanised; connecting and seal ...

    By VAPTECH Ltd Office in Tbilisi, GEORGIA (US) (USA). from By-Pass Pipe Systems Product line

  • U-S-Pipe - Model NXT Series - Ductile Iron Pipe

    NXT is U.S. Pipe's next generation 'push on' type pipe.  The advanced design utilizes a lip type seal gasket cross section which allows for lower insertion forces and greater joint deflection when compared to similar push on joint designs.  Features incorporated into the joint also allow the gasket to resist being unseated or rolled ...

    By U.S. Pipe. - a subsidiary of Mueller Water Products, Inc. Office in Gainesville, GEORGIA (US) (USA). from Ductile Iron Pipe Product line

  • Premium

    Procon - Model Series 190-D - Rubber Navy Sleeve Type Pipe Connector

    The Proco Series 190-D Rubber Navy Sleeve Type Pipe Connector is constructed of neoprene rubber, are reinforced with impregnated woven nylon and come with an aluminized glass outer cover (meets Mil-E-15330 Class B specifications). Sealing beads are molded on the interior of the sleeve to provide extra sealing action for the clamping area. Internal ...

    By Proco Products, Inc. Office in Atlanta, GEORGIA (US) (USA). from Rubber Navy Sleeve Type Pipe Connector Product line

  • BEVELMASTER - Model 204B - ID Mount Pipe Beveling Equipment

    Tri Tool’s Model 204B BEVELMASTER features inline feed for general ease-of-use, a powerful 1.5HP motor and a versatile cutting head which accepts a wide variety of bits. The head is sealed to protect the inner components. The solid milled body has a heavy duty gear set and tapered roller bearings for reliability. A tool steel mandrel and ...

    By Tri Tool Inc. Office in Atlanta, GEORGIA (US) (USA). from ID Mount Pipe Beveling Equipment Product line

  • Premium

    Proco - Model Style 9013-EP - Low Torque EPDM Gasket w/Peroxide Cure

    The Proco 9013-EP Low Torque Gasket is fully molded for precise sizing, and is manufactured with the PTFE film bonded to the EPDM rubber gasket. A unique outer sealing ring around each bolt hole is added, for additional sealing safety. These special gaskets are for use on plastic, fiberglass, glass or other piping systems which require minimal ...

    By Proco Products, Inc. Office in Atlanta, GEORGIA (US) (USA). from Low Torque EPDM Gasket w/Peroxide Cure Product line

  • Premium

    Proco - Model Style 9013-ET - Low Torque EPDM Gasket

    The Proco 9013-ET Low Torque EPDM Gasket is fully molded for precise sizing, and is manufactured with the PTFE film bonded directly to the EPDM rubber gasket. A unique outer sealing ring around each bolt hole is added for additional sealing safety. These special gaskets are for use on plastic, fiberglass, glass or other piping systems which ...

    By Proco Products, Inc. Office in Atlanta, GEORGIA (US) (USA). from Low Torque EPDM Gasket Product line

  • LFM - Tee-Based Manholes

    Tee-Base Manholes are constructed as a two-piece manhole consisting of a fiberglass tee-base and manhole riser. The FRP tee-base is constructed of the same material as the adjacent FRP mainline pipe and is installed as an in-line tee. The branch outlet of the tee is positioned upward to provide access from the riser to the pipe. The riser is then ...

    By L.F. Manufacturing, Inc. Office in Waycross, GEORGIA (US) (USA). from Tee-Based Manholes Product line

  • Model AC-9 - Grooved Coupling

    Model AC-9 couplings are available in sizes 3'-36' and are designed for connecting ductile iron. pipe. These couplings provide an alternative to flanged piping methods. All sizes are furnished with flush gaskets which provide a triple seal. Couplings are designed for use on flexible or rigid radius grooved ductile iron pipe per ANSI/AWWA C606. ...

    By Star Pipe Products Ltd. (SPP) Office in Chamblee, GEORGIA (US) (USA). from Grooved Coupling Product line

  • Slip Lining

    Slip lining is one of the original methods of trenchless rehabilitation for existing pipelines. In fact, it's been used since the early 1940's. Like its other trenchless rehab counterparts, slip lining will repair leaks and can restore structural stability to an existing pipeline. Slip lining is completed by installing a smaller, 'carrier pipe' ...

    By Inland Pipe Rehabilitation (IPR) based in Conyers, GEORGIA (US) (USA).

  • Premium

    Chemtex - Rescue Tape

    Got a leaking hose? Wrap it up tight with silicone tape! Just stretch, wrap & get rescued™ SEALS LEAKS FAST! 950 PSI tensile strength. Resists 500°F, Insulates 8,000 volts. Resists fuels, oil, acids, solvents, salt water, road salt, UV rays Most versatile tape on the market, even better than duct tape. Repair leaking hoses and ...

    By Chemtex, Inc. Office in Milledgeville, GEORGIA (US) (USA). from Rescue Tape Product line

  • NIBCO - Model 200 PSI, PFFP600 - Brass Ball Valves

    The NIBCO Press System brass ball valve features press-to-connect end connections with an inboard bead and EPDM O-rings for quick and easy joinery to the piping system. Simply applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux.

    By NIBCO Inc. Office in Greensboro, GEORGIA (US) (USA). from Brass Ball Valves Product line

  • Model Type V - Milling Cutter

    This innovative reliable milling cutter is made of tempered steel and offers superior drive and thrust efficiency. The drive itself is made of tempered stainless steel comprising of one shaft and two double sealed bearings. This eliminates the need for any hydraulic motors and therefore any lubrication, ensuring years of low maintenance operation. ...

    By USB-Sewer Equipment Corporation (USB-SEC) based in Marietta, GEORGIA (US) (USA). from Milling Cutter Product line

  • Model Type IV/1 - Milling Cutter

    This innovative reliable milling cutter is made of tempered steel and offers superior drive and thrust efficiency. The drive itself is made of tempered stainless steel comprising of one shaft and two double sealed bearings. This eliminates the need for any hydraulic motors and therefore any lubrication, ensuring years of low maintenance operation. ...

    By USB-Sewer Equipment Corporation (USB-SEC) based in Marietta, GEORGIA (US) (USA). from Milling Cutter Product line

  • Model Type II - Milling Cutter

    This innovative reliable milling cutter is made of tempered steel and offers superior drive and thrust efficiency. The drive itself is made of tempered stainless steel comprising of one shaft and two double sealed bearings. This eliminates the need for any hydraulic motors and therefore any lubrication, ensuring years of low maintenance operation. ...

    By USB-Sewer Equipment Corporation (USB-SEC) based in Marietta, GEORGIA (US) (USA). from Milling Cutter Product line

  • Premium

    Myron L - Model Flow Switch™ FS4 - Compatible With the CTCII and In-Line Monitor/Controllers

    Service: Compatible liquids. Wetted Materials: Housing and Shuttle: Noryl GFN3 (Polyphenylene Ether and Polystyrene). Spring: 316 Stainless Steel. Retaining Clip: pH 15-7 MO Stainless Steel. Magnet: Ceramic 1. Temperature Limits: 0 - 194°F/-21 - 90°C. Pressure Limit: 100 psig/6,90 bar @ 70°F/21°C, 50 psig/3,45 ba r@ ...

    By Myron L Company Distributor in GEORGIA (US) (USA). from Compatible With the CTCII and In-Line Monitor/Controllers Product line

  • Model 4DDSX30 - Double Disc Pump

    Maintain In Place design w/ hinged housingsfor quick elastomer replacement without disturbing piping. Two-piece swan neck. Only 5 wetted components. Self-priming with high suction lifts. Seal-less design, no packing or mechanical seals, no seal water required. Runs dry without damage. No check valves, no fouling problems. Handles up to 1” ...

    By Penn Valley Pump Co. Inc. Distributor in GEORGIA (US) (USA). from Double Disc Pump Product line

  • Model 8DDDX214 - Double Disc Pump

    Non-close design provides for extremely low wear and very low life cycle costs. “Maintain-in-Place” hinged housing design allows servicing w/out disturbing piping. Seal-less design, no stuffing box or mechanical seals, no seal water required. Runs dry without damage. Self-priming with high suction lift capability. No check valves, no ...

    By Penn Valley Pump Co. Inc. Distributor in GEORGIA (US) (USA). from Double Disc Pump Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you