pipe sealing equipment in Illinois

  • Model CCES Series - Casing Spacers End Seals

    Casing spacer end seals shall be a pull-over type construction and made from Neoprene with T-304 stainless steel bands for securing the ends of the end seal to the casing pipe and carrier pipe. Casing spacer end seals shall be Model CCES as manufactured by Cascade Waterworks Mfg. Co. of Yorkville, IL or approved equal.

    By Cascade Waterworks Manufacturing Company based in Yorkville, ILLINOIS (USA). from Casing Spacers End Seals Product line

  • Premium

    Shand & Jurs - Model 93603 - Liquid Seal

    The Shand & Jurs Model 93603 Liquid Seal is used with liquid level gauges to retain tank vapor space pressure and vacuum. It is also used as a barrier to protect the gauge head from corrosive tank vapors or other effects. The construction of the liquid seal features aluminum housings, galvanized iron pipe, Delrin tape pulleys that rotate on ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Liquid Seal Product line

  • LMK T-Liner - Gasket-Sealing

    LMK’s T-Liner is a one-piece homogenous main and lateral CIPP connection liner. T-Liner has a uniform wall thickness and incorporates compressible material at the upstream and downstream ends creating a smooth tapered transition to the host pipe. Both the mainline and lateral sections are formed as a structural cylinder that renews 18-inches ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from Gasket-Sealing Product line

  • Paratech - Leak Sealing Kits

    Paratech's Leak Sealing Kits provide a variety of Leak Sealing Bags, Velcro straps, ratchet belts, hoses and controllers. These Kits can be further accessorized with the Manual Foot Pump, working air cylinders and leak sealing plugs. Paratech's chemical resistant reinforced neoprene air bags help seal up liquid leaks on pipes, tankers and railroad ...

    By Paratech Inc. based in Frankfort, ILLINOIS (USA). from Leak Sealing Kits Product line

  • Insignia - O-Rings for Compression Seal

    Insignia O-rings can be attached to a liner that is inverted into the pipeline to provide a compression seal at the termination points of the liner. This procedure remotely positions the O-rings between the host pipe and the liner tube or between a cured liner and a new liner (cold joint), sealing any annular space and providing a long-term ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from O-Rings for Compression Seal Product line

  • LMK Performance Liner - Sectional Inversion Process Renews Pipes

    LMK’s Performance Liner Sectional process renews pipes from 6 to 42 inches in diameter and in continuous lengths up to 50 feet. The liner can be inverted anywhere in the pipe with no trimming or cutting. The result is a structural, root proof, water-tight seal. Performance Liner Sectional conforms 100% to ASTM F2599-11. Gasket sealing ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from Sectional Inversion Process Renews Pipes Product line

  • CentriPipe - Centrifugally Cast Concrete Pipe

    AP/M’s centrifugally cast concrete pipe system for the structural renewal of culverts and sanitary sewer pipe--without backhoes, repaving, traffic detours, flooding or hazardous construction. Let's face it: corrugated metal, with its propensity to rust and buckle, was not meant to last forever…20 to 30 years is its designed life. Your ...

    By AP/M Permaform based in Johnston, ILLINOIS (USA).

  • Plug N´ Dike Seals Even Free-Flowing Leaks

    Unique polymer and mineral-based product instantly seals leaks. Plug N´ Dike is a non-toxic material that immediately forms a tight temporary seal against fuels and chemicals. Applies directly over the leak without surface preparation. Plugs up to 2´ - 3´ pressure head. Not recommended for use with acids, caustics, or oxidizers. Premix is ready to ...

    By BASCO, Inc based in University Park, ILLINOIS (USA).

  • WaBack Mini - Automatic Backwater Stop Valve

    WaBack Mini is an automatic backwater stop for sewage and storm water.  WaBack Mini is for use in basements which have connections to sewage or toilet pipes.  Both the inlet and outlet are smooth and constructed for installation with sleeve or flex couplings.  WaBack Mini is installed in the existing pipe and provides a secure ...

    By Wapro AB Office in Chicago, ILLINOIS (USA).

  • Calibrated Sight Gauges for Horizontal Drums

    Use with a 3/4'' NPT faucet for continuous gauging and dispensing (faucet not included). Replaceable glass tube with protective aluminum frame. Chemical resistant TFE (Aflas) seal. Additional seal materials are available upon request.  Standard Gauge has 3/4'' carbon steel pipe nipple and coupling. Great for petroleum products and other ...

    By BASCO, Inc based in University Park, ILLINOIS (USA).

  • Model AC-9 - Grooved Coupling

    Model AC-9 couplings are available in sizes 3'-36' and are designed for connecting ductile iron. pipe. These couplings provide an alternative to flanged piping methods. All sizes are furnished with flush gaskets which provide a triple seal. Couplings are designed for use on flexible or rigid radius grooved ductile iron pipe per ANSI/AWWA C606. ...

    By Star Pipe Products Ltd. (SPP) Office in Indianapolis, ILLINOIS (USA). from Grooved Coupling Product line

  • Dyna Grip - Stay Cable Systems

    The DYNA Grip Stressing Anchorage consists of an anchor block in which the strands are anchored by high fatigue 3 part-wedges. A ring nut is threaded onto the anchor block to transmit the cable force into the structure via the bearing plate. A steel pipe which incorporates bending and sealing provisions for the strands is part of the anchor block. ...

    By Dywidag Systems International USA Inc. (DSI) Office in Bolingbrook, ILLINOIS (USA). from Stay Cable Systems Product line

  • VAC-A-TEE - Trenchless Cleanout System

    VAC-A-TEE is a trenchless cleanout installation system that is environmentally friendly, utility friendly, and installer friendly. Installed by means of hydro or vacuum excavation, the VAC-A-TEE system is a clean and safe method for installing a new cleanout, which provides access to the sewer lateral pipe for cleaning, lining, root removal, CCTV, ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from Trenchless Cleanout System Product line

  • LMK - Liner Lateral System

    The Performance Liner Lateral System is a unique cured in-place process that allows the installer the freedom to position the liner anywhere in the pipe by inverting through a cleanout. The liner can be directed either upstream or downstream using LMK’s patented guide shoe. In addition, this versatile system is capable of being installed in ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from Liner Lateral System Product line

  • LMK T-Liner Shorty - System for Main/Lateral CIPP Connection Liner

    LMK’s T-Liner Shorty system is a one-piece, structural, stand-alone homogenous Main/Lateral CIPP connection liner that extends 3 feet up into the lateral pipe. Shorty was designed for municipalities that want the connection sealed and the most value without the cost or legal issues associated with installing a cleanout. Shorty is the ...

    By LMK Technologies, Inc. based in Ottawa, ILLINOIS (USA). from System for Main/Lateral CIPP Connection Liner Product line

  • PVC Containment System

    Rovanco's PVC Containment System is designed for piping systems above or below ground. A High-quality, durable PVC jacket, provides an economical system. Rovanco's PVC System is provided with spooled out, part numbered, cut-to-length pieces factory manufactured to field dimensions. All elbows, tees, and end seals are manufactured at ...

    By Rovanco Piping Systems, Inc. based in Joliet, ILLINOIS (USA). from PVC Containment System Product line

  • Pitbull - Model T2C & T2S - Transfer and Self-Priming Pumps

    The model T2C (steel) and T2S (316SS) are transfer pumps designed for dry-piped applications, and can be either gravity fed or configured for suction lift applications. The T2's are suited for heavy/constant use in difficult fluid applications. Able to pass 2' solids along with abrasives, stringy materials, slurries and corrosives, the PITBULL's ...

    By Pitbull Industrial Pumps based in South Elgin, ILLINOIS (USA). from Transfer and Self-Priming Pumps Product line

  • WaStop - Stainless Steel Inline Check Valves

    The patented Wastop inline check valve has been the innovator and industry leader since its inception in 2002.Wastop excels at preventing backflow, flooding, and sewage odor spread in pipe networks. It can be inserted into almost any existing pipe. Unlike any other check valve available today, Wastop can be mounted horizontally, vertically, on an ...

    By Wapro AB Office in Chicago, ILLINOIS (USA).

  • DEPAC Inlet Valve

    The United Conveyor Corporation (UCC) DEPAC® Inlet Valve is designed for vessel isolation service in high pressure pneumatic conveying applications of abrasive material such as dry ash. UCC has engineered new component options for this valve to provide improved sealing performance, extended service life, greater reliability and ease of ...

    By United Conveyor Corporation (UCC) based in Waukegan, ILLINOIS (USA). from DEPAC Inlet Valve Product line

  • Valves with Extensions

    All area and main line isolation valves shall be Ohio Medical® series. Valves shall be either locking or non-locking. The valves shall be oxygen cleaned, full port, three piece ball type with flanges to allow easy service and installation. The valve shall have a bronze body, and a blow-out proof stem. The valve ball shall be bronze chrome ...

    By Ohio Medical Corporation based in Gurnee, ILLINOIS (USA). from Valves with Extensions Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you