pipe sealing equipment in Massachusetts

  • Premium

    Proco - Pipe Penetration Seals

    The Proco Pen-Seal is designed to provide a gas and water-tight seal. All sizes have been tested to withstand a hydrostatic seal up to 20 psig or 40 feet of head pressure, in addition to withstanding temperatures up to 250 °F. The Pen-Seal’s standard elastomer material is EPDM, but a Nitrile material is available if the seal may come in ...

    By Proco Products, Inc. Distributor in MASSACHUSETTS (USA). from Pipe Penetration Seals Product line

  • Premium

    Shand & Jurs - Model 93603 - Liquid Seal

    The Shand & Jurs Model 93603 Liquid Seal is used with liquid level gauges to retain tank vapor space pressure and vacuum. It is also used as a barrier to protect the gauge head from corrosive tank vapors or other effects. The construction of the liquid seal features aluminum housings, galvanized iron pipe, Delrin tape pulleys that rotate on ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) Distributor in Middleboro, MASSACHUSETTS (USA). from Liquid Seal Product line

  • Premium

    Procon - Model Series 190-D - Rubber Navy Sleeve Type Pipe Connector

    The Proco Series 190-D Rubber Navy Sleeve Type Pipe Connector is constructed of neoprene rubber, are reinforced with impregnated woven nylon and come with an aluminized glass outer cover (meets Mil-E-15330 Class B specifications). Sealing beads are molded on the interior of the sleeve to provide extra sealing action for the clamping area. Internal ...

    By Proco Products, Inc. Distributor in MASSACHUSETTS (USA). from Rubber Navy Sleeve Type Pipe Connector Product line

  • Thread Sealants

    Thread Sealants seal and secure metal pipes and fittings by filling the space between threaded metal parts. Thread Sealants prevent leakage caused by vibration loosening, tape shredding, solvent evaporation, damaged threads, and temperature cycling. Designed for low and high-pressure applications, Thread Sealants seal instantly for on-line low ...

    By ITW Polymers Adhesives, North America based in Danvers, MASSACHUSETTS (USA).

  • Fine Bubble Ozone Dissolution System

    Ceramic diffuser design and controlled permeability promotes dependable uniform air distribution and bubble release. Proven holder design properly secures the diffuser to the piping system. Diffuser sealing gaskets available in Hypalon, Viton, Gor-Tex or other specialty materials. Diffuser holders and piping fabricated for Type 316L stainless ...

    By Sanitaire - a Xylem brand Office in Worcester, MASSACHUSETTS (USA). from Fine Bubble Ozone Dissolution System Product line

  • Model Type E - Pressure Relief Valves

    These relief valves have been designed with a PTFE bellows stem seal and are available in body materials of PVC, PP, PVDF and PTFE, O-ring seals of EPDM, FKM or PTFE encapsulated FKM, and in sizes from 1/2' - 4'. The Type E Pressure Relief Valves feature light-weight construction, high flow coefficients, and no metal to media contact.   ...

    By Asahi/America, Inc. based in Lawrence, MASSACHUSETTS (USA). from Pressure Relief Valves Product line

  • Sanitaire Silver - Model II LP - Membrane Disc Diffusers

    The Sanitaire Silver Series II LP is a 9-inch low-pressure version of the Silver Series II membrane, and features a modified slit pattern to handle airflow up to 17 Nm(3)/h (10 scfm), equal to 11 standard cubic feet per minute, with minimal pressure loss. Lower energy consumption and raised operating efficiencies are made possible by the unique ...

    By Sanitaire - a Xylem brand Office in Worcester, MASSACHUSETTS (USA). from Membrane Disc Diffusers Product line

  • Model E-HRD - Suppressor

    The E-HRD suppressor is designed for installation on all types of vessels, ducts and pipes for dusts, gases and hybrid mixtures. The suppressor valve is closed with a domed disc and sealing ring and then pressurized with nitrogen. Beneath the domed disc are the actuation devices, comprising a detonator and line-cutting charge. Within approximately ...

    By IEP Technologies, LLC based in Marlborough, MASSACHUSETTS (USA). from Suppressor Product line

  • Multiport - Model Type 23 - Thermoplastic Ball Valves (1/2 to 6)

    Ball valves perform a quarter turn on/off or modulating function. A flow-controlling ball located within the body of the valve contains a hole through its center along one axis, which connects the inlet and outlet ports of the body. The ball itself is held in place by, and rotates 90º within, PTFE seats. These provide permanent lubrication ...

    By Asahi/America, Inc. based in Lawrence, MASSACHUSETTS (USA). from Thermoplastic Ball Valves (1/2 to 6) Product line

  • Labcock - Thermoplastic Valves

    Ball valves perform a quarter turn on/off or modulating function. A flow-controlling ball located within the body of the valve contains a hole through its center along one axis, which connects the inlet and outlet ports of the body. The ball itself is held in place by, and rotates 90º within, PTFE seats. These provide permanent lubrication ...

    By Asahi/America, Inc. based in Lawrence, MASSACHUSETTS (USA). from Thermoplastic Valves Product line

  • Longwrap Hotcote Petrolatum Tape

    Cold applied petrolatum corrosion control, waterproofing, and sealing tape for high temp applications. Longwrap Hotcote Petrolatum Tape is a 1.15 mm VOC Free, cold applied, wax based tape designed to protect piping and metal structures from damage and deterioration caused by corrosion at temperatures up to 120°C (248°F). This ...

    By Chase Corporation based in Westwood, MASSACHUSETTS (USA). from Longwrap Hotcote Petrolatum Tape Product line

  • Asahi/America - Model Type 21/21a - True Union Ball Valve (1/2)

    Type-21/21a ball valves are corrosion resistant plastic manual true union design quarter turn valves with hyperbolic flow characteristics, low pressure drops and reliable sealing. They offer relatively poor flow control and are typically used in on/off applications. They are excellent for use in clean fluid service applications with very ...

    By Asahi/America, Inc. based in Lawrence, MASSACHUSETTS (USA). from True Union Ball Valve (1/2) Product line

  • Premium

    Myron L - Model Flow Switch™ FS4 - Compatible With the CTCII and In-Line Monitor/Controllers

    Service: Compatible liquids. Wetted Materials: Housing and Shuttle: Noryl GFN3 (Polyphenylene Ether and Polystyrene). Spring: 316 Stainless Steel. Retaining Clip: pH 15-7 MO Stainless Steel. Magnet: Ceramic 1. Temperature Limits: 0 - 194°F/-21 - 90°C. Pressure Limit: 100 psig/6,90 bar @ 70°F/21°C, 50 psig/3,45 ba r@ ...

    By Myron L Company Distributor in MASSACHUSETTS (USA). from Compatible With the CTCII and In-Line Monitor/Controllers Product line

  • Premium

    Proco - Model Style 9013-EP - Low Torque EPDM Gasket w/Peroxide Cure

    The Proco 9013-EP Low Torque Gasket is fully molded for precise sizing, and is manufactured with the PTFE film bonded to the EPDM rubber gasket. A unique outer sealing ring around each bolt hole is added, for additional sealing safety. These special gaskets are for use on plastic, fiberglass, glass or other piping systems which require minimal ...

    By Proco Products, Inc. Distributor in MASSACHUSETTS (USA). from Low Torque EPDM Gasket w/Peroxide Cure Product line

  • Premium

    Proco - Model Style 9013-ET - Low Torque EPDM Gasket

    The Proco 9013-ET Low Torque EPDM Gasket is fully molded for precise sizing, and is manufactured with the PTFE film bonded directly to the EPDM rubber gasket. A unique outer sealing ring around each bolt hole is added for additional sealing safety. These special gaskets are for use on plastic, fiberglass, glass or other piping systems which ...

    By Proco Products, Inc. Distributor in MASSACHUSETTS (USA). from Low Torque EPDM Gasket Product line

  • Model Series 37G - Thimble Insert Check Valves

    The Tideflex Series 37-G Thimble Insert is comprised of a Series 37-G Duckbill Check Valve mounted in a thimble. The 37-G is pre-assembled, clamped and pinned into the thimble prior to shipment. The Thimble Insert can be provided flangeless or with a circular or rectangular flange and the 37-G can either face the flange or away from the flange ...

  • Simflo - Short Coupled Pumps

    The discharge head shall be of ASTM A48, Class 30 Cast Iron or ASTM A53, grade B Fabricated Steel designed for above ground discharge with sufficient strength and rigidity to support the motor mounted on it and carry the suspended weight of the attached column and bowl assemblies. If fabricated steel, a radius or three-piece mitered type elbow ...

    By Simflo Pumps Inc Distributor in MASSACHUSETTS (USA).

  • Model 3DDSX11 - Double Disc Pump

    Maintain In Place design w/ hinged housings for quick elastomer replacement without disturbing piping. Two-piece swan neck. Only 5 wetted components. Self-priming with high suction lifts. Seal-less design, no packing or mechanical seals, no seal water required. Runs dry without damage. No check valves, no fouling problems. Handles up to 3/4” ...

    By Penn Valley Pump Co. Inc. Distributor in MASSACHUSETTS (USA). from Double Disc Pump Product line

  • Model 3DDSX22 - Double Disc Pump

    Maintain In Place design w/ hinged housings for quick elastomer replacement without disturbing piping. Two-piece swan neck. Only 5 wetted components. Self-priming with high suction lifts. Seal-less design, no packing or mechanical seals, no seal water required. Runs dry without damage. No check valves, no fouling problems. Handles up to 3/4” ...

    By Penn Valley Pump Co. Inc. Distributor in MASSACHUSETTS (USA). from Double Disc Pump Product line

  • Model 6DDSX76 - Double Disc Pump

    Maintain In Place design w/ hinged housings for quick elastomer replacement without disturbing piping. Two-piece swan-neck. Only 5 wetted components. Self-priming with high suction lifts. Seal-less design, no stuffing box or mechanical seals, no seal water required. Runs dry without damage. No check valves, no fouling problems. Handles up to ...

    By Penn Valley Pump Co. Inc. Distributor in MASSACHUSETTS (USA). from Double Disc Pump Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you