pipe sealing equipment in Minnesota

  • NO-DIG - Pipes

    Hgh strength,  corrosion-resistant  clay pipe. Resilient gasket buffer between the collar and pipe. Resilient gasket forms watertight seal. Compression disc to distribute the jacking forces. 316 stainless steel collar compresses gasket and resists shear and corrosion.

    By The Logan Clay Products Company Office in Brownsdale, MINNESOTA (USA).

  • Clean-Seal Pneumatic Plugs

    Designed for stack testing of drain, waste, and vent plumbing systems, Clean-Seal plugs thread into a standard test tee. The bladder is inflated and then water is introduced into the pipe. Upon test completion, deflate the bladder; water travels down the pipe, eliminating test water backsplash.

    By Cherne Industries based in Minneapolis, MINNESOTA (USA). from Clean-Seal Pneumatic Plugs Product line

  • U-S-Pipe - Model NXT Series - Ductile Iron Pipe

    NXT is U.S. Pipe's next generation 'push on' type pipe.  The advanced design utilizes a lip type seal gasket cross section which allows for lower insertion forces and greater joint deflection when compared to similar push on joint designs.  Features incorporated into the joint also allow the gasket to resist being unseated or rolled ...

    By U.S. Pipe. - a subsidiary of Mueller Water Products, Inc. Office in North Rogers, MINNESOTA (USA). from Ductile Iron Pipe Product line

  • Monitor Well Locking Plug

    Monitor-Well Locking Plug Features: Designed to seal monitor wells. Meets all EPA requirements for locking plugs. Sized to seal Schedule 40 piping. 2' and 4' sizes can also seal Schedule 5 pipe. Works with Cherne's solid brass padlock.

    By Cherne Industries based in Minneapolis, MINNESOTA (USA). from Monitor Well Locking Plug Product line

  • Clean-Out Gripper Plug

    Clean-Out Gripper Plug Features: Guaranteed to seal any damaged threads. Made with glass-reinforced ABS plastic. Black color blends well with cast-iron pipe. Stainless steel hardware. NPT sizes, including hard to find 3½'. Natural rubber threaded o-ring for positive seal.

    By Cherne Industries based in Minneapolis, MINNESOTA (USA). from Clean-Out Gripper Plug Product line

  • Drain Water Level Control Stuctures

    Regulate operating water level of ponds, marshes, wetlands and wastewater systems by installing valves on discharge pipes. The sliding drain gate shuts off the discharge pipe, but can be partially open to drain the pond at a controlled rate. Gaskets on the sliding control weir and drain gate resist leakage, seal tight.

    By Prinsco, Inc. based in Willmar, MINNESOTA (USA). from Drain Water Level Control Stuctures Product line

  • Infi-Shield - Gator Wrap

    Each manhole, catch basin or pipe shall be sealed with an external rubber sleeve similar to the Infi-Shield® Gator Wrap as manufactured by Sealing Systems Inc. (763-478-2057). The seal shall be made of a Stretchable, Self-Shrinking, Intra-Curing Halogeated based rubber with a minimum thickness of 30 mils. The back side of each unit shall be ...

    By Sealing Systems Inc. based in Loretto, MINNESOTA (USA).

  • Cherne - Hub-Fit Gripper Plug

    Hub-Fit Gripper Plug Features: Ideal for use in hub fittings and in bell-end pipe. Pressure rated for conducting DWV tests. Made with glass-reinforced ABS plastic. Yellow color for greater visibility in pipe. Natural rubber o-ring for positive seal. Galvanized carriage bolt to prevent corrosion. Easy-to-install, extra large zinc wing nut – ...

    By Cherne Industries based in Minneapolis, MINNESOTA (USA). from Hub-Fit Gripper Plug Product line

  • Poly-Cam - Model 651 - Pulling Head

    The POLY-CAM Steel Pulling heads are a single eye construction rated to the safe pulling strength of the pipe installed. The design of the Pulling Heads allow them to be fully pressure rated and sealed not to allow drilling fluids and other contaminates . In addition Poly-Cam offers a female threaded port for ease of pressing the line after the ...

    By Poly-Cam Inc. based in Anoka, MINNESOTA (USA). from Pulling Head Product line

  • Poly-Cam - Model 650 - Pulling Head

    The POLY-CAM Steel Pulling heads are a single eye construction rated to the safe pulling strength of the pipe installed. The design of the Pulling Heads allow them to be fully pressure rated and sealed not to allow drilling fluids and other contaminates . In addition Poly-Cam offers a female threaded port for ease of pressing the line after the ...

    By Poly-Cam Inc. based in Anoka, MINNESOTA (USA). from Pulling Head Product line

  • PLC - Dual Phase Extraction Systems

    Product Level Control manufactures a variety of dual phase extraction (DPE) systems; custom-equipped for optimal on-site performance. By offering flexible system designs and a wide range of available product parts and accessories, we meet your individual project goals for the best possible value. We size and match model type according to your air ...

    By Product Level Control Inc. (PLC) based in Burnsville, MINNESOTA (USA). from Dual Phase Extraction Systems Product line

  • DeZURIK - Model PEC & PEF - Eccentric Plug Valves

    DeZURIK Eccentric Plug Valves feature a rectangular port design that provides wide tolerance seating geometry for lasting superior shutoff. The eccentric plug action and resilient plug facings assure lasting dead-tight shutoff. Standard features include corrosion-resistant bearings, welded nickel seat, grit excluders, and adjustable stem seal ...

    By DeZurik Water Controls based in Sartell, MINNESOTA (USA). from Eccentric Plug Valves Product line

  • Premium

    Myron L - Model Flow Switch™ FS4 - Compatible With the CTCII and In-Line Monitor/Controllers

    Service: Compatible liquids. Wetted Materials: Housing and Shuttle: Noryl GFN3 (Polyphenylene Ether and Polystyrene). Spring: 316 Stainless Steel. Retaining Clip: pH 15-7 MO Stainless Steel. Magnet: Ceramic 1. Temperature Limits: 0 - 194°F/-21 - 90°C. Pressure Limit: 100 psig/6,90 bar @ 70°F/21°C, 50 psig/3,45 ba r@ ...

    By Myron L Company Distributor in MINNESOTA (USA). from Compatible With the CTCII and In-Line Monitor/Controllers Product line

  • SPI

    The SPI is a vertical inline, single stage, single suction centrifugal pumps accordance to API 610, latest edition with mechanical seal chamber in accordance with API 682. The pump is suitable for being directly mounted into the piping being supported by an integral compact mounting foot, without the need of a foundation. Hydraulic thrusts are ...

    By RUHRPUMPEN GmbH Distributor in Saint Paul,, MINNESOTA (USA). from SPI Product line

  • Model 3DDSX11 - Double Disc Pump

    Maintain In Place design w/ hinged housings for quick elastomer replacement without disturbing piping. Two-piece swan neck. Only 5 wetted components. Self-priming with high suction lifts. Seal-less design, no packing or mechanical seals, no seal water required. Runs dry without damage. No check valves, no fouling problems. Handles up to 3/4” ...

    By Penn Valley Pump Co. Inc. Distributor in MINNESOTA (USA). from Double Disc Pump Product line

  • Model 3DDSX22 - Double Disc Pump

    Maintain In Place design w/ hinged housings for quick elastomer replacement without disturbing piping. Two-piece swan neck. Only 5 wetted components. Self-priming with high suction lifts. Seal-less design, no packing or mechanical seals, no seal water required. Runs dry without damage. No check valves, no fouling problems. Handles up to 3/4” ...

    By Penn Valley Pump Co. Inc. Distributor in MINNESOTA (USA). from Double Disc Pump Product line

  • Model 6DDSX76 - Double Disc Pump

    Maintain In Place design w/ hinged housings for quick elastomer replacement without disturbing piping. Two-piece swan-neck. Only 5 wetted components. Self-priming with high suction lifts. Seal-less design, no stuffing box or mechanical seals, no seal water required. Runs dry without damage. No check valves, no fouling problems. Handles up to ...

    By Penn Valley Pump Co. Inc. Distributor in MINNESOTA (USA). from Double Disc Pump Product line

  • Model 6DDSX107 - Double Disc Pump

    Maintain In Place design w/ hinged housings for quick elastomer replacement without disturbing piping. Two-piece swan-neck. Only 5 wetted components. Self-priming with high suction lifts. Seal-less design, no stuffing box or mechanical seals, no seal water required. Runs dry without damage. No check valves, no fouling problems. Handles up to ...

    By Penn Valley Pump Co. Inc. Distributor in MINNESOTA (USA). from Double Disc Pump Product line

  • CMC - Model Roeflex - Fine Bubble Difusers

    For over 20 years Roediger ROEFLEX diffusers have been a leader in the aeration industry. Most air diffusers are subject to flooding when the air pressure is turned off. ROEFLEX diffusers have a triple seal mechanism that prevents liquid from entering the diffuser and piping system. ROEFLEX air diffusers will not clog, even if the flow of air is ...

    By Charter Machine Company Distributor in MINNESOTA (USA).

  • Model Series 37G - Thimble Insert Check Valves

    The Tideflex Series 37-G Thimble Insert is comprised of a Series 37-G Duckbill Check Valve mounted in a thimble. The 37-G is pre-assembled, clamped and pinned into the thimble prior to shipment. The Thimble Insert can be provided flangeless or with a circular or rectangular flange and the 37-G can either face the flange or away from the flange ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you