pipe sealing equipment in New Jersey

  • NO-DIG - Pipes

    Hgh strength,  corrosion-resistant  clay pipe. Resilient gasket buffer between the collar and pipe. Resilient gasket forms watertight seal. Compression disc to distribute the jacking forces. 316 stainless steel collar compresses gasket and resists shear and corrosion.

    By The Logan Clay Products Company Office in E. Brunswick, NEW JERSEY (USA).

  • Tyton - Joint Pipe

    Simple. Sturdy. Reliable. The predominant gasket employed throughout the ductile iron pipe industry by several pipe manufacturers. Made of flexible and resistant rubber, the Tyton gasket provides a permanent watertight seal through radial compression provided by the pipe spigot within the finished joint.

    By McWane Ductile Office in Phillipsburg, NEW JERSEY (USA).

  • Model MJ/TJ - Joint Pipe

    The Mechanical with Tyton Joint pipe combines the ease of connecting fittings and valves with the simple, reliable, and proven Tyton Joint gasket sealing system. Available in sizes 6' through 24', this dual purpose ductile iron product could be used in both push on and restrained applications.

    By McWane Ductile Office in Phillipsburg, NEW JERSEY (USA).

  • Mechanical Joint Pipe

    The 'original' modern pipe joint, circa 1925; the mechanical joint remains in use primarily as a means for connecting fittings, valves, and similar appurtenances to a pipeline. The nuts, bolts, and gland featured in the joint provide a permanent watertight seal to 350 psi and more through a “stuffing box” compression of the gasket into ...

    By McWane Ductile Office in Phillipsburg, NEW JERSEY (USA).

  • X-Pando - Model Special No.2 - Pipe Joint Compound

    For sealing joints of cement lined pipes to be welded - the compound that expands as it sets! (from .002' to .004' per cubic inch). Expands as it sets, producing a tight joint. Corrects imperfections in the pipe joining surfaces. Specially formulated to be compatible with the heat requirements of welding. Non-toxic - contains NO lead, asbestos, ...

    By X-Pando Products Company based in Ewing, NEW JERSEY (USA).

  • TR Flex - Restrained Joint Pipe

    Simply put, the most-widely accepted and installed integrally-cast restraint joint system in the ductile iron pipe industry. Proven as a versatile and easy-to-use item, this joint is flexible, sure, and watertight to and beyond its 350-psi pressure rating while preventing longitudinal separation of the joints whether installed above or below ...

    By McWane Ductile Office in Phillipsburg, NEW JERSEY (USA).

  • Ball and Socket Joint Pipe

    All the best of Tyton or Fastite rubber-gasket sealed ductile iron pipe joints with triple the maximum deflection available from either. Designed and used in subaqueous installations where lateral forces and an unsure bury condition demand a strong yet flexible restraint joint piping system. 15-degrees of deflection per joint equates to a 4-1/2 ...

    By McWane Ductile Office in Phillipsburg, NEW JERSEY (USA).

  • Subline - Tight-Fit Polyethylene Lining

    PIM Corporation's Subline system uses standard polyethylene (PE) pipe to create a close-fit liner within an existing pipe with very little excavation. Up to 3,000 feet of new PE pipe can be inserted into an existing pipeline between entry and exit pits. Moments before installation, a PE pipe is pushed through a special die which folds the pipe ...

    By PIM Corporation based in Piscataway, NEW JERSEY (USA). from Tight-Fit Polyethylene Lining Product line

  • Model REN - Rubber Nozzle

    The REN nozzle is designed to slip over the exhaust pipe and stay connected by friction seal. It includes a CO outlet and is recommended for use on cars and motorcycles. The REND is a variety of the REN nozzle that includes a damper to close off systems that are not in use.

    By Plymovent Group BV Office in Cranbury, NEW JERSEY (USA). from Rubber Nozzle Product line

  • ScrubSeal - Vacuum Overflow Valves

    New Bionomic ScrubSeal Vacuum Overflow Valves are the perfect overflow and vacuum seal solution to replace troublesome manometer water seal legs on scrubber sumps. Designed to eliminate unreliable, cumbersome manometer piping, and the headache of maintaining a liquid filled line, ScrubSeal acts as a check valve to allow drainage of scrubber sump ...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA). from Vacuum Overflow Valves Product line

  • FEC - Hilliard Gas Filters

    HILCO gaseous fuel filters are available in simplex design and in duplex arrangements for continuous operation. The filters are specifically designed for gas turbine systems with high pressure, high flow rate, and minimal dirt load. Dry Seal Gas Integral Duplex Filters simplify piping and operation of the duplex filter arrangement. Duplex housings ...

    By Filter Equipment Company, Inc.(FEC) based in Wall, NEW JERSEY (USA).

  • Model PSS - Pressure Sensor

    The Onyx Isolator Ring provides a simple, accurate method to measure pressure of slurries and corrosive fluids. The PSS series is compatible with threaded pipe connections. Onyx ultra-deep vacuum filling insures the highest accuracy in the industry. The patented “Module Seal” – standard on all Onyx Isolator Rings – allows ...

    By Onyx Valve Company based in Cinnaminson, NEW JERSEY (USA). from Pressure Sensor Product line

  • Model PSW - Pressure Sensor

    Technical Specifications of the Onyx Isolator Ring- PSW. The Onyx Isolator Ring provides a simple, method to measure pressure of slurries and corrosive fluids. The PSW series is compatible with flanged pipe connections. Nesting inside the bolt circle of mating flanges provides accurate alignment and minimum weight at the lowest installed cost. The ...

    By Onyx Valve Company based in Cinnaminson, NEW JERSEY (USA). from Pressure Sensor Product line

  • Model PSR - Pressure Sensor

    Technical Specifications of the Onyx Isolator Ring – PSR.The Onyx Isolator Ring provides a simple, accurate method to measure pressure of slurries and corrosive fluids. The PSR series is compatible with flanged pipe connections. The full face thru bolt holes match the bolt circle of mating flanges for accurate alignment making it the ideal ...

    By Onyx Valve Company based in Cinnaminson, NEW JERSEY (USA). from Pressure Sensor Product line

  • Model Series DGV - Thermoplastic Degassing Valves

    Safety: Allows safe expulsion of unwanted air in piping systems. Dependability: Patent-pending float mechanism assures minimal emission of system liquid prior to sealing. Minimal Closing Pressure: Closes at 0 PSI, as long as liquid is present. Cost Efficient: Designed to improve system performance and competitively priced. Superior Design: Valve ...

    By Plast-O-Matic Valves, Inc. based in Cedar Grove, NEW JERSEY (USA). from Thermoplastic Degassing Valves Product line

  • PLC - Dual Phase Extraction Systems

    Product Level Control manufactures a variety of dual phase extraction (DPE) systems; custom-equipped for optimal on-site performance. By offering flexible system designs and a wide range of available product parts and accessories, we meet your individual project goals for the best possible value. We size and match model type according to your air ...

    By Product Level Control Inc. (PLC) Office in Spring Lake, NEW JERSEY (USA). from Dual Phase Extraction Systems Product line

  • CMC - Model Roeflex - Fine Bubble Difusers

    For over 20 years Roediger ROEFLEX diffusers have been a leader in the aeration industry. Most air diffusers are subject to flooding when the air pressure is turned off. ROEFLEX diffusers have a triple seal mechanism that prevents liquid from entering the diffuser and piping system. ROEFLEX air diffusers will not clog, even if the flow of air is ...

    By Charter Machine Company based in Metuchen, NEW JERSEY (USA).

  • Model Series MBV - Manual Ball Valves

    Now available in 3' and 4' sizes! Molded mounting brackets for excellent support and ease of piping installation. Pressure rated at 175 PSI (11,91 BAR). Kynar PVDF ball valve rated to 232 PSI. Plast-O-Matic True Blue Ball Valves sizes 1/2', 3/4', 1', 1¼', 1½' and 2' are 100% molded, machined & assembled in Cedar Grove, NJ, USA. ...

    By Plast-O-Matic Valves, Inc. based in Cedar Grove, NEW JERSEY (USA). from Manual Ball Valves Product line

  • Premium

    WATERSTOP - Model XP - Active Polymer Waterproofing Membrane

    The next generation of waterstop that expands upon contact with water to form a positive seal to stop water ingress through cast-in-place concrete construction joints and around pipe penetrations. Through the use of the patented XP technology, WATERSTOP® XP is proven effective in a wide range of contaminated environments.

    By Colloid Environmental Technologies Company (CETCO) Distributor in Hamilton, NEW JERSEY (USA). from Active Polymer Waterproofing Membrane Product line

  • Premium

    Myron L - Model Flow Switch™ FS4 - Compatible With the CTCII and In-Line Monitor/Controllers

    Service: Compatible liquids. Wetted Materials: Housing and Shuttle: Noryl GFN3 (Polyphenylene Ether and Polystyrene). Spring: 316 Stainless Steel. Retaining Clip: pH 15-7 MO Stainless Steel. Magnet: Ceramic 1. Temperature Limits: 0 - 194°F/-21 - 90°C. Pressure Limit: 100 psig/6,90 bar @ 70°F/21°C, 50 psig/3,45 ba r@ ...

    By Myron L Company Distributor in Windsor, NEW JERSEY (USA). from Compatible With the CTCII and In-Line Monitor/Controllers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you