pipe sealing equipment in North Carolina

  • Pneumatic Track System -PTS

    PTS is suitable for stations where vehicles vary from time to time. The system is based on a nozzle expanded by compressed air, fixing and sealing the nozzle tightly round the tail pipe. PTS is supplied with a choice of two different sized nozzles to fit the most common types of tail pipes. A quick coupler makes it easy to interchange the nozzles.

    By Nederman Office in Thomasville, NORTH CAROLINA (USA). from Pneumatic Track System -PTS Product line

  • Model ASTM-F-477 - Bell & Spigot Couplers with O Ring Gasket

    CPP BELL & SPIGOT with 'O' Ring Gasket - these couplers come with a water seal restricting gasket manufactured per ASTM-F-477. These couplers meet the 13 psi Pre-Installation, Gravity Flow, Pipe Joint Laboratory Test ASTM-D-3212. State Highway Departments and others knowledgeable in pipe installing often note in writing pipe job installation ...

    By Crumpler Plastic Pipe Inc. (CPPP) based in Roseboro, NORTH CAROLINA (USA).

  • FEC - Hilliard Gas Filters

    HILCO gaseous fuel filters are available in simplex design and in duplex arrangements for continuous operation. The filters are specifically designed for gas turbine systems with high pressure, high flow rate, and minimal dirt load. Dry Seal Gas Integral Duplex Filters simplify piping and operation of the duplex filter arrangement. Duplex housings ...

    By Filter Equipment Company, Inc.(FEC) Office in Wake Forest, NORTH CAROLINA (USA).

  • Model A Series - 2-Way Normally Closed Direct Acting Solenoid Valves

    These solenoid valves are available in two different pipe sizes, 1/8' and 1/4'. They operate from 0 to 1450 psig and are used for a variety of different applications, such as heating and automation. The high quality of construction materials used in these solenoid valves combined with extensive performance testing ensure maximum reliability and ...

    By Granzow, Inc. based in Charlotte, NORTH CAROLINA (USA). from 2-Way Normally Closed Direct Acting Solenoid Valves Product line

  • Model A0089 & A0096 - Coaxial Tight Fill Adapters

    Emco Wheaton Coaxial Vapor Recovery Adapters are designed for standard coaxial fill systems and coaxial systems with self-sealing vapor lines. Features recessed threads for easy installation and positive seating on riser pipes. Use with the A0097 Tight Fill Cap. Use Emco Wheaton A0081. Adapter Wrench for installation. The A0089 and A0096 are ...

    By Emco Wheaton Retail Corporation based in Wilson, NORTH CAROLINA (USA). from Coaxial Tight Fill Adapters Product line

  • Model MAP Series - Metallic Magnetic Drive Pump – ANSI B73.3 (OH1)

    TRUFLO's MAP Series of magnetic pumps are used for no leakage service and they are the most economical and efficient pumps.  Designed to eliminate the leakage problems associated with centrifugal pumps and mechanical seals. The MAP Series pump was developed to conform to ANSI dimensions - allowing our customers to simply change ANSI pumps ...

    By TRUFLO Pumps, Inc. based in Greensboro, NORTH CAROLINA (USA). from Metallic Magnetic Drive Pump – ANSI B73.3 (OH1) Product line

  • RS MAXPATCH - Lining Rehabilitation Systems

    In addition to RS Technik's complete lining rehabilitation systems, RS MaxPatch® is available for fast, trenchless, selective repair methods. RS MaxPatch® is a proven trenchless cured-in-place point repair system used to renew short sections of up to DN 500 mm diameter gravity-flow pipelines. The corrosion-resistant fiberglass composite ...

    By RS Technik AG Office in Cary, NORTH CAROLINA (USA). from Lining Rehabilitation Systems Product line

  • INNERLYNX - Penetration Seals

    INNERLYNX forms a mechanical seal between pipes going through walls, floors, vaults, tanks and pipeline casings. Besides being designed to form a hydrostatic seal of up to 40 PSIG and up to 96 feet of head pressure, INNERLYNX helps absorb vibrations, shocks, and sound waves. Being non-conductive, INNERLYNX electrically insulates the inner carrier ...

    By Advance Products & Systems, Inc. Distributor in Matthews, NORTH CAROLINA (USA).

  • Premium

    Myron L - Model Flow Switch™ FS4 - Compatible With the CTCII and In-Line Monitor/Controllers

    Service: Compatible liquids. Wetted Materials: Housing and Shuttle: Noryl GFN3 (Polyphenylene Ether and Polystyrene). Spring: 316 Stainless Steel. Retaining Clip: pH 15-7 MO Stainless Steel. Magnet: Ceramic 1. Temperature Limits: 0 - 194°F/-21 - 90°C. Pressure Limit: 100 psig/6,90 bar @ 70°F/21°C, 50 psig/3,45 ba r@ ...

    By Myron L Company Distributor in NORTH CAROLINA (USA). from Compatible With the CTCII and In-Line Monitor/Controllers Product line

  • Premium

    Stevens - Model Yagi - GOES Antenna

    The 10-element, cross-polarized GOES Yagi antenna features a sealed rod feed system to withstand harsh environments and weather events. Constructed out of durable aluminum, the boom is 1' in diameter, and the elements are 3/8' diameter. Included mounting hardware allows the antenna to be attached to pipes from 1' to 2.5' max diameter.

    By Stevens Water Monitoring Systems, Inc. Distributor in Charlotte, NORTH CAROLINA (USA). from GOES Antenna Product line

  • APS - Casing Spacers & End Seals

    APS Casing Spacers center water and sewer pipes in casings with ease of installation, are virtually corrosion proof and provide insulating protection from a possible electrical shorting between the carrier pipe and casing. No special tools are needed, no grease is used and they are easily bolted on by a single worker. APS Casing Spacers eliminate ...

    By Advance Products & Systems, Inc. Distributor in Matthews, NORTH CAROLINA (USA).

  • SSI - Aeration Quick Connect Saddle

    The SSI Aeration Quick Connect™ Saddle is designed to mount onto 4” Sch 40 PVC pipe or Sch 10 stainless pipe with a 114.3mm outside diameter. Special adapters available for mounting on 110, 108mm OD pipe, 3″/90mm diameter pipe. Accepts both SSI 9″ and 12″ discs on the same mount. Reduces labor costs – install on ...

    By SSI Aeration, Inc. Distributor in NORTH CAROLINA (USA). from Aeration Quick Connect Saddle Product line

  • Hedstrom - Septic Adapter Plates

    Square-to-round adapter plates allow for faster conversions of tank risers to corrugated polyethylene pipe. The 3/16' think plates, which feature strengthening ribs and molded-in caulking channel helps simplify installation of corrugated polypipe risers on the top of the tank, and provide a tight seal between the tank opening and polypipe riser.

    By Hedstrom Environmental Distributor in NORTH CAROLINA (USA). from Septic Adapter Plates Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you