pipe sealing equipment in Texas

  • Premium

    Proco - Pipe Penetration Seals

    The Proco Pen-Seal is designed to provide a gas and water-tight seal. All sizes have been tested to withstand a hydrostatic seal up to 20 psig or 40 feet of head pressure, in addition to withstanding temperatures up to 250 °F. The Pen-Seal’s standard elastomer material is EPDM, but a Nitrile material is available if the seal may come in ...

    By Proco Products, Inc. Office in Houston, TEXAS (USA). from Pipe Penetration Seals Product line

  • Premium

    Shand & Jurs - Model 93603 - Liquid Seal

    The Shand & Jurs Model 93603 Liquid Seal is used with liquid level gauges to retain tank vapor space pressure and vacuum. It is also used as a barrier to protect the gauge head from corrosive tank vapors or other effects. The construction of the liquid seal features aluminum housings, galvanized iron pipe, Delrin tape pulleys that rotate on ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) Office in Houston, TEXAS (USA). from Liquid Seal Product line

  • Model BP - Well Seal

    Available for 4”, 5”, 6”, 8”, 10”, 12”, and 14” well casing. Two (2) side opening for wires or additional pipe. O-Ring sealed in the ID of WELL SEAL and drop pipe. 4”, 5” and 6” are constructed from lightweight high strength aluminum alloy. 8”, 10”, 12” and 14” are ...

    By Western Rubber & Manufacturing based in Conroe, TEXAS (USA).

  • COMPAKT - Seals Made Sealing System

    The COMPAKT Design Seals Made sealing system is specially engineered to unique construction site challenges. It provides excellent sealing performance in wall openings for gas, water and sewage pipes, and various types of cables. The COMPAKT seal is a pressure-tight system. The COMPAKT Special Design Seals system fits to eccentric pipe dimensions ...

    By GPT, a division of EnPro Industries Office in Houston, TEXAS (USA). from Seals Made Sealing System Product line

  • Premium

    Viscotaq ViscoSealant - Sealing Above-Ground Flanges

    With its cartridge-dispenser system, ViscoSealant delivers a simple method for sealing above-ground flanges and gaps in tank chimes and for waterproofing cable and pipe penetrations. It has the same advanced chemistry as the other Viscotaq products, meaning this formulated polymer retains permanent wetting characteristics, allowing the viscous ...

    By InduMar Products, Inc. based in Houston, TEXAS (USA). from Sealing Above-Ground Flanges Product line

  • Model CG - Quad Seal Packer

    Provides a sand tight seal between well casing and drop pipe. Manufactured from a SILICON material. Contains NO hydrocarbons or other toxic material. Available in most popular sizes for the environmental market. For identification – Colored BROWN

    By Western Rubber & Manufacturing based in Conroe, TEXAS (USA).

  • Wrap-It Link - Wall Penetration Seals

    This versatile sealing link system can be utilized to seal the annular space of carrier pipe and casing pipe applications as well as wall penetrations of piping system.

    By CCI Pipeline Systems Office in Spring, TEXAS (USA).

  • Wrap-It Link - Versatile Sealing Link System

    Wrap-It Link is a versatile sealing link system can be utilized to seal the annular space of carrier pipe and casing pipe applications as well as wall penetrations of piping system. Wrap-It Link have excellent electrical insulation properties and may be used for pressure application up to 20 psig.

    By CCI Pipeline Systems Office in Spring, TEXAS (USA).

  • Nova - Model UV - Main Line Sealing System

    The NOVA Main Line UV Curing System is an outstanding alternative to traditional Cured-in-Place Pipe (CIPP) approaches, implementing UV LED Technology to main line sewer relining. The NOVA Main Line UV Curing System is capable of operating in 6” to 60” diameter pipe rehabilitation tasks and comes with 1200 ft. of multi conductor cable.

    By Rush-Overland Manufacturing based in Odessa, TEXAS (USA). from Main Line Sealing System Product line

  • Casing Spacers & End Seals

    Casing Spacers will save you time and labor - quickly installed by a single worker. Casing Spacers provide electrical insulation, will not rot or settle, support carrier pipe weight uniformly, protect against long term corrosion, require no casing filler and slide into place easily.

    By CCI Pipeline Systems Office in Spring, TEXAS (USA).

  • U-S-Pipe - Model NXT Series - Ductile Iron Pipe

    NXT is U.S. Pipe's next generation 'push on' type pipe.  The advanced design utilizes a lip type seal gasket cross section which allows for lower insertion forces and greater joint deflection when compared to similar push on joint designs.  Features incorporated into the joint also allow the gasket to resist being unseated or rolled ...

    By U.S. Pipe. - a subsidiary of Mueller Water Products, Inc. Office in San Antonio,, TEXAS (USA). from Ductile Iron Pipe Product line

  • Premium

    Procon - Model Series 190-D - Rubber Navy Sleeve Type Pipe Connector

    The Proco Series 190-D Rubber Navy Sleeve Type Pipe Connector is constructed of neoprene rubber, are reinforced with impregnated woven nylon and come with an aluminized glass outer cover (meets Mil-E-15330 Class B specifications). Sealing beads are molded on the interior of the sleeve to provide extra sealing action for the clamping area. Internal ...

    By Proco Products, Inc. Office in Houston, TEXAS (USA). from Rubber Navy Sleeve Type Pipe Connector Product line

  • Hot Water Piping Systems

    The hot water piping systems we engineer at Insul-Pipe Systems are constructed of high quality, insulated carrier pipe constructed of steel, CPVC, fiberglass, copper, or ductile iron. These systems are designed with premium quality closed cell polyurethane insulation that not only provides the lowest thermal conductivity available, but also ...

    By Insul-Pipe Systems based in Buda, TEXAS (USA).

  • Caloritech™ - Model FPH - Flanged Pipe Insert Heater

    The Caloritech™ FPH Flanged Pipe Insert Heater (also known as an insert tank heater) is uniquely designed to heat storage tanks containing viscous, corrosive or heat sensitive materials including asphalt, tar, fuel, oils, paint and glue. The FPH provides a safe, cost-effective low maintenance solution for tank heating. By enclosing the ...

    By CCI Thermal Technologies Inc. Office in Houston, TEXAS (USA). from Flanged Pipe Insert Heater Product line

  • BEVELMASTER - Model 204B - ID Mount Pipe Beveling Equipment

    Tri Tool’s Model 204B BEVELMASTER features inline feed for general ease-of-use, a powerful 1.5HP motor and a versatile cutting head which accepts a wide variety of bits. The head is sealed to protect the inner components. The solid milled body has a heavy duty gear set and tapered roller bearings for reliability. A tool steel mandrel and ...

    By Tri Tool Inc. Office in Houston, TEXAS (USA). from ID Mount Pipe Beveling Equipment Product line

  • Flange Connection Tite Liner

    Tite Liner flange fittings have been used since 1985 to provide a tight seal and restrained joint in pressures up to and over 5,000 psi.  Each raised face steel flange is machined to match the inside diameter of the steel pipe and inspected to verify that the raised face dimension is correct.  A radius that matches the radius of the ...

    By United Pipeline Systems Office in Houston, TEXAS (USA).

  • Premium

    Proco - Model Style 9013-EP - Low Torque EPDM Gasket w/Peroxide Cure

    The Proco 9013-EP Low Torque Gasket is fully molded for precise sizing, and is manufactured with the PTFE film bonded to the EPDM rubber gasket. A unique outer sealing ring around each bolt hole is added, for additional sealing safety. These special gaskets are for use on plastic, fiberglass, glass or other piping systems which require minimal ...

    By Proco Products, Inc. Office in Houston, TEXAS (USA). from Low Torque EPDM Gasket w/Peroxide Cure Product line

  • Premium

    Proco - Model Style 9013-ET - Low Torque EPDM Gasket

    The Proco 9013-ET Low Torque EPDM Gasket is fully molded for precise sizing, and is manufactured with the PTFE film bonded directly to the EPDM rubber gasket. A unique outer sealing ring around each bolt hole is added for additional sealing safety. These special gaskets are for use on plastic, fiberglass, glass or other piping systems which ...

    By Proco Products, Inc. Office in Houston, TEXAS (USA). from Low Torque EPDM Gasket Product line

  • Wall Sleeves

    CCI has your solution to all of your sealing needs when it comes to wall penetration.  Our complete sealing system includes Wrap-It Link™ Wall Penetration Seals and Wall Sleeves with water stops. Working together, these products will provide you with the necessary seal for your piping system.

    By CCI Pipeline Systems Office in Spring, TEXAS (USA).

  • COMPAKT FW - Model 40mm - Wide Rubber Element

    COMPAKT FW is a 40mm-wide rubber element pressed between two stainless steel discs, and is the perfect perfect complement to our LINK-SEAL modular sealing. The pressure-tight system seals wall openings of gas, water and sewage pipes or various types of cables. The COMPAKT ring seals the annular space between the carrier and the casing pipe or the ...

    By GPT, a division of EnPro Industries Office in Houston, TEXAS (USA). from Wide Rubber Element Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you