pipe sealing equipment in Wisconsin

  • Cretex - Internal Joint Seal

    Stop ground-water infiltration and increase water treatment capacity in underground pipes with Cretex’s Internal Pipe Joint Seals. These internal joint seals provide a compression seal that is watertight. The Internal Joint Seals are watertight compression seals that reduce groundwater infiltration, increasing waste-water treatment capacity ...

    By Cretex Specialty Products based in Waukesha, WISCONSIN (USA).

  • Cretex - Model HydraTite - Internal Joint Seal

    The HydraTite Internal Joint Seal is a mechanical, trenchless remediation for repair of pipe joints. The HydraTite system consists of a proprietary rubber seal which spans the joint and is held in place by stainless steel retaining bands on either side of the joint. These retaining bands are hydraulically expanded and locked in place using a wedge ...

    By Cretex Specialty Products based in Waukesha, WISCONSIN (USA).

  • Cretex - Versatile External Wrap Collars

    Cretex Wrap collars are so versatile that they can be used on manholes, round pipe, elliptical pipe, oval pipe, arched pipe, tongue and groove joints, and bell and spigot joints. In addition, our Cretex Wrap can be used with or without other jointing materials, on wet or dry surfaces, in fact, most any joint type can be sealed.

    By Cretex Specialty Products based in Waukesha, WISCONSIN (USA).

  • Edstrom - 1/8` Original Drinking Valve

    The Edstrom Original Drinking Valve is made of solid brass material with a stainless steel stem and a tough elastomer seal and diaphragm. This model has a standard 1/8'mpt connection for threading into rigid PVC pipe lines. (The Fitting Tee Adapter PVC, 1630-2914-100, can be used for mounting in 1/2'PVC pipe). A great valve for rabbits and ...

    By AgSelect.com - Avidity Science based in Waterford, WISCONSIN (USA). from 1/8` Original Drinking Valve Product line

  • Fine Bubble Ozone Dissolution System

    Ceramic diffuser design and controlled permeability promotes dependable uniform air distribution and bubble release. Proven holder design properly secures the diffuser to the piping system. Diffuser sealing gaskets available in Hypalon, Viton, Gor-Tex or other specialty materials. Diffuser holders and piping fabricated for Type 316L stainless ...

    By Sanitaire - a Xylem brand based in Brown Deer, WISCONSIN (USA). from Fine Bubble Ozone Dissolution System Product line

  • Model ZP1+ Series - Positive Displacement Pump

    Continuing to bring innovation to the sanitary pump market, Ampco Pumps has enhanced the traditional design of the popular ZP1 pump with the patented ZP1+ positive displacement pump. This advanced design changes the position of the static and dynamic O-rings for better performance. The ZP1+ O-rings can be changed without disconnecting the pump ...

    By Ampco Pumps Company based in Glendale, WISCONSIN (USA). from Positive Displacement Pump Product line

  • Sanitaire Silver - Model II LP - Membrane Disc Diffusers

    The Sanitaire Silver Series II LP is a 9-inch low-pressure version of the Silver Series II membrane, and features a modified slit pattern to handle airflow up to 17 Nm(3)/h (10 scfm), equal to 11 standard cubic feet per minute, with minimal pressure loss. Lower energy consumption and raised operating efficiencies are made possible by the unique ...

    By Sanitaire - a Xylem brand based in Brown Deer, WISCONSIN (USA). from Membrane Disc Diffusers Product line

  • Hedland - Air and Compressed Gas Meters Test Kit

    Flow ranges: 0.5 - 5.0 SCFM (0.2 - 2.2 L/SEC) up to 100 - 1000 SCFM (50 - 475 L/SEC). Construction: Aluminum, brass and T303 stainless steel. Sizes: 1/4 to 1-1/2 inch ports. Ports: NPTF and BSPP. Pressure up to 600 psi (41 bar) maximum. Temperature up to 240 °F (116 °C). Accuracy ±2% full scale. Repeatability ±1%. Standard ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Air and Compressed Gas Meters Test Kit Product line

  • KASRO - Model DN 200-600 - Injection Sealing System

    Injection Sealing System for rehabilitation of branch pipe joints. With epoxy resin (other material possible). Injection material is carried within membrane cartridges underneath the form plates.Flow path of the material very short - hence. The pressure of the injection is directly tranferred to the damage spot. The intersection angles and axes ...

    By ProKASRO Mechatronik GmbH Distributor in Waukesha, WISCONSIN (USA). from Injection Sealing System Product line

  • Premium

    Myron L - Model Flow Switch™ FS4 - Compatible With the CTCII and In-Line Monitor/Controllers

    Service: Compatible liquids. Wetted Materials: Housing and Shuttle: Noryl GFN3 (Polyphenylene Ether and Polystyrene). Spring: 316 Stainless Steel. Retaining Clip: pH 15-7 MO Stainless Steel. Magnet: Ceramic 1. Temperature Limits: 0 - 194°F/-21 - 90°C. Pressure Limit: 100 psig/6,90 bar @ 70°F/21°C, 50 psig/3,45 ba r@ ...

    By Myron L Company Distributor in WISCONSIN (USA). from Compatible With the CTCII and In-Line Monitor/Controllers Product line

  • KASRO - Model DN150-600 - Cap Placement System

    The intersection angles and axes are not predetermined due to a side balloon and a collapsible seal on the form plate, which are fully expandable and inflatable with compressed air. To ensure an easy and non-destructive procedure of the cap placement system in the main sewer, the form plate is inclined to the back and the diameter of the entire ...

    By ProKASRO Mechatronik GmbH Distributor in Waukesha, WISCONSIN (USA). from Cap Placement System Product line

  • Plasti-Fab - Gray Fiberglass Reinforced Plastic Slide Gates

    Industrial Slide gates are commonly used in open channel and moderate head applications to isolate equipment, divert flow, close off a wall opening, or cover a pipe that is flush with the wall. Plasti-Fab slide gates are manufactured of gray fiberglass reinforced plastic containing ultraviolet inhibitors. Plasti-Fab penstock is reinforced to ...

    By Plasti-Fab, Inc. Distributor in Mequon, WISCONSIN (USA). from Gray Fiberglass Reinforced Plastic Slide Gates Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you