Pipe Testing Equipment Near Yemen
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
Joint Testers are designed for locating leaks and breaches of sewers, pipelines, drainage systems, gullies joints as fast and safe, at any type of pipe material including concrete, ductile iron, polyethylene, PVC, steel etc. Ready to test with water or air straight from the factory, no modifications are needed. Since the test is performed ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
Inflatable medium test plugs are named as medium because of their lenght, their lenght is between test plugs and small test plugs. Like as other test plugs, they are used for leak tests by air or water. They have lightweight, most sizes can be installed by one man and with an eyebolt to handle simplify ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
Conical Pipe Test Plugs have an advantage to make leak test, for sealing, for bypassing not only in round pipes but also they can be used in ovoid, egg-shaped, rectangular, kite shape and many others pipes. They are also fit through standard manholes even on large scales. Mainly used to make leak ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
High Pressure Aluminium Tensioner Test Plugs have an over-average cohesive friction. Expanded in localized areas via multiple compression points and via tensions around the perimeter of the plug enable the strong seal. They are also equipped with a bypass for diverting the liquid flow in the pipe in a different direction directions. The ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
Mechanical Pipe Plugs are available for pipe diameters ¼” to 8” (6mm to 200mm) as standard production, it is also possible to produce them in higher sizes. With metal parts made of galvanized steel. Pipe plugs for blocking and testing pipelines, suitable for backpressures up to 6 bar. They can be usable in ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
The pneumatic/Inflatable multi size Egg Shape pipe test plugs have a bypass system to allow testing the pipeline and changing the fluid direction of the pipe. Egg shaped pipe test plugs are available in different sizes for sealing, blocking sewers, drainage systems, pipelines and gullies, ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
in these pipelines and sewers, To perform the test, the ends of the pipeline are blocked with the inflatable test plug and the Inflatable pipe plug, the pipes are filled with water and pressurized to a predetermined test ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
Inflatable small pipe stoppers are named due to their length, they are suitable for special application conditions needed short lenght and less heavy stoppers, most sizes can be installed by one man. They are used at sewer connections, blocking pipes and leak testing of newly constructed and refurbished pipelines. The ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
Inflatable small test plugs are suitable for testing special application conditions of drainage systems, pipelines, sewers and gutters needed short lenght and less heavy plugs, especially suitable for testing of house connections. They are also commonly used for this purpose when it is necessary to bypass the water flow in the ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
Used to block sewer pipes, to repair and maintenance work, and effective tools for the quick and reliable sealing or closing of drainage systems, pipelines, sewers, and gullies. Aluminum plates combine strength with lightness. Being install easily and can be used until 100 ° C. Mainly used to make hydro testing in pipes for with water or ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
Mechanical Pipe Test Plugs have bypass inside to make hydro test at pipes diameters ¼” to 8” (6mm to 200mm) as standard production, higher sizes can be produced to order. They can be suitable to test the pipes as copper, steel, aluminum, HDPE and etc. The test ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
The plugs are used to make hydro testing up to 16 bar until 70 degrees, being the double seal allows them to test up to higher pressures up to 16 and more if requested. They have sturdy and lasting with a chemically resistant neoprene gasket They can be useful not only for temporary usage but also for permanent usage. They can be easily ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
The PLUGLINE pipe stoppers are designed for quick and reliable sealing and blocking of sewers, pipes, gullies and drainages. They are recommended mainly in case of repairs, maintenance, failures, and they are ideal for leak inspections by performing hydrostatic testing. When performing hydrostatic testing, these plugs are placed ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
Multi size metal core test plugs are kind of pneumatic test plugs, they are manufactured with big size metal core inside as bypass, they are used for repairing and testing of sewage pipes, newly constructed or refurbished pipelines without stopping its normal flow. The only difference between pipe ...
-
PremiumManufactured by Totalien Endustriyel Urunler San. Tic. Ltd. Sti.based in TURKEY
High pressure pipe test plugs are required by many industries at pipelines and sewers that perform hydrostatic tests to verify the flow integrity of equipment tasked with handling fluids, often these tests are performed on a regular basis. High pressure pipe test plugs provide a safe pressure ...
-
Manufactured by Cherne Industriesbased in USA
Cherne® Multi-Size Big Mouth Plugs are the ideal solution for gravity bypassing or bypass pumping. Their removable tire valve allows for easy replacement, with optional quick disconnect. Cherne Industries is a global leader in pipe plugs and ...
-
Manufactured by Cherne Industriesbased in USA
Cherne® Single-Size Underground Test-Ball® Plugs are designed for blocking flow, allowing for maintenance in sanitary and storm sewer systems. These plugs may also be used as a back plug for sewer air tests. Cherne Industries is a global leader in pipe plugs, blocking and ...
-
Manufactured by Cherne Industriesbased in USA
Cherne® Single-Size Plumbing Muni-Ball® Plugs offer a full bypass, allowing both testing and monitoring of piping systems. This makes them ideal for installation and repair of residential or commercial piping systems. Cherne Industries is a global leader in pipe plug, blocking and ...
-
Manufactured by Cherne Industriesbased in USA
and corrosion. Its field replaceable pressure relief valve prevents over-inflation. Color-coded inflation ports match Air-Loc's hose and panel system. Cherne Industries is a global leader in pipe plug, blocking and ...
-
Manufactured by Cherne Industriesbased in USA
Cherne® I-Series Test Ball Plugs are designed with the size and expansion range meet the needs of U.S. and international markets. Plugs have full body cording for added durability. Cherne Industries is a global leader in pipe plug, blocking and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you