pipeline sealing equipment in United Kingdom

  • CAMSTOPPER - Model CAM Range - Mechanical Pipeline Plug for Drain & Sewer Applications

    The full Camstopper range covers internal pipe diameters from 90mm to 150mm and has been re-engineered to offer better quality components and an EPDM seal for improved performance and durability.

    By Norham Plastics Limited based in Rotherham, UNITED KINGDOM.

  • CAMSTOPPER - Model Pro Range - Mechanical Pipeline Plug for Drain & Sewer Applications

    Mechanical pipeline plug designed for drain & sewer applications. Fast installation thanks to the patented lever. Safe removal by use of the Remote Installation Device or by attaching a rope to the handle. 80 mm wide seal to improve back pressure resistance. Range from 175mm to 521mm Internal Pipe Diameter immediately available. For smaller ...

    By Norham Plastics Limited based in Rotherham, UNITED KINGDOM.

  • Pipe End Caps

    Used to provide a temporary water and dirt seal at the end of a pipe. Useful for sealing road crossings laid prior to the main pipeline.

    By Pipe Equipment Specialists Ltd. (PESL) based in Thornaby, UNITED KINGDOM. from Pipe End Caps Product line

  • Blind Flanges

    Blind flanges are typically used to blank off pipelines. They are bolted on to adjacent flanged pipeline assemblies, where their solid centre acts as a seal. The blind flange can also be adapted by machining into it a smaller bore or a threaded bore. This reduces the bore of the pipeline.

    By Alexander Comley Ltd based in Kingswinford, UNITED KINGDOM. from Blind Flanges Product line

  • End Caps

    End Caps are used for blocking off or sealing the end of a pipeline. The end cap is welded on at its weld prep to the relevant sized pipe within the pipeline that requires blocking off/sealing. Once in place, unlike a blind flange that can be unbolted to allow access to the pipeline, the end cap is firmly fixed. At Alexander Comley we have our own ...

    By Alexander Comley Ltd based in Kingswinford, UNITED KINGDOM. from End Caps Product line

  • ASV Stubbe - Model K 210 (DN 50 – DN 200) - Chemical Butterfly Valve

    Applications: Chemical plants, Industrial plants, Electroplating plants, Utilisation: For shutting off pipeline systems. Advantages: Double shaft seal, Body with O – ring, No additional flange sealings required. Flow media: Neutral and aggressive fluid or gaseous media free of solid particles

    By MGA Controls Limited based in Burscough, UNITED KINGDOM. from Chemical Butterfly Valve Product line

  • REDSKIN - Foam Pig

    TDW manufactures foam pigs, including the REDSKIN line, with an oversized diameter. The resulting tight fit helps ensure an effective seal, regardless of a pipeline’s wall thickness, making it anextremely effective batching tool.

    By T.D.Williamson (TDW) Office in Aberdeen, UNITED KINGDOM. from Foam Pig Product line

  • Atmos - Pig Point Detector

    Atmos Pig Point works by inserting a bi-directional brushed cup pig into the pipeline during shut-in (static conditions) and allowing the pig to slowly move along the pipeline to a pre-defined distance. The bi-directional brushed pig provides a tight seal within the pipeline to effectively separate and monitor the pressure difference between the ...

    By Atmos International Inc. Office in Manchester, UNITED KINGDOM. from Pig Point Detector Product line

  • PIPA - Pipe Cabling System

    The Pipeline is a unique cabling system manufactured specifically for in-line cabling of newly constructed pipelines. The product can also be retrofitted into existing pipes. The 4mm galvanised steel polyethylene coated product is designed for long term exposure to chlorinated water, and ideal for potable water pipes. The cable is suitable for all ...

    By Pipa Ltd based in Derby, UNITED KINGDOM.

  • Pipepod - Model S - Leak Detection System for Small Diameter Service Pipes

    The unique leak detection product enters a pipeline via a metered boundary box outlet. The 100 metre system is fully portable with battery powered supply. Accurate leak identification and location within pressurised potable water service pipelines from 10mm diameter and above raed to 10 BAR pressure. System inserted directly into the pipeline at ...

    By Pipa Ltd based in Derby, UNITED KINGDOM.

  • Emco Wheaton - Model D0002 - Swivel Joints

    The D0002 is the basis for Emco Wheatons’ single ball track swivel joints. The D0002 is compact and lightweight when compared with other similar swivels and its unique internal flange design makes it possible to change the seal without removing the swivel joint from the pipeline. The D0002 Swivel Joint can be lubricated via grease nipples ...

    By Flotech Performance Systems based in Fareham, UNITED KINGDOM. from Swivel Joints Product line

  • Pipepod - Model S - Leak Detection System for Diameter Water Pipes

    The Pipepod listening stick is a unique leak detection product that enters a pipeline via a direct entry point as small as 1 inch diameter. The 100 metre system is fully portable with battery powered supply. Accurate leak identification and location within pressurised potable water pipelines from 50mm diameter and above rated to 10 BAR pressure. ...

    By Pipa Ltd based in Derby, UNITED KINGDOM.

  • Model Type LF - Liquid Samplers

    The type LF industrial liquid sampler is used for sampling a wide viscosity range of liquids, from pipelines and tanks and is mounted as required through a standard flange arrangement. When activated, the 25mm diameter, sampling probe extends into the liquid line a sample is collected in the probe’s cavity (8cc standard), the probe retracts ...

    By Wrights Dowson Group based in Bedfordshire, UNITED KINGDOM. from Liquid Samplers Product line

  • Flanged Joint

    Diameters: 80mm – 1200mm. Linings: Epoxy Coatings to DWI 31 (4) (a) and EN598 ,plus Epoxy seal coat up to 800mm OD. For EN598, High Alumina Cement Pipe. Uses: Potable Water & Sewage Sludge. Pressure Rating: NP16 available from stock. (NP10 & 25 are available to order). Realistic Usability: High pressure mains. Any potable water or ...

    By FT Ductile Ltd - Frazer & Tabberer Ltd. based in Lichfield, UNITED KINGDOM. from Flanged Joint Product line

  • Gaskets

    Sealing technology is another critical but commonly overlooked part of a given pipeline system. This product comes in variety of guises from the more standard Ring Type Joint (“RTJ”) and Spiral Wound Gasket to the specially machined product. The force applied by the tightened fasteners in the installed flange system not only hold the ...

    By Alexander Comley Ltd based in Kingswinford, UNITED KINGDOM. from Gaskets Product line

  • Briggs - Dirty Water Roto Rainer Mono Pump Units

    All Roto Rainer pumpsets are based around the well proven British built Mono progressive cavity pump built specifically for dirty water and slurry applications. The surface mounted unit is designed to give reliable service with a minimum of maintenance. For example, a mechanical seal is used in place of traditional ‘packed’ seals, ...

    By Briggs Irrigation based in Corby, UNITED KINGDOM.

  • Spigot & Socket Tyton Joint

    Diameters: 80mm – 1000mm. Linings: Cement Mortar Lining to DWI 31 (4) (a) plus Epoxy seal coat up to 800mm OD. For EN598, High Alumina Cement Pipe. Protection: Zinc – aluminium alloy with blue epoxy coating, P.W. (red epoxy coating for sewage pipes). Uses: Potable Water & Sewage Sludge. Pressure Rating: 40 bar, with standard thrust ...

    By FT Ductile Ltd - Frazer & Tabberer Ltd. based in Lichfield, UNITED KINGDOM. from Spigot & Socket Tyton Joint Product line

  • Model 341 - 347 - Dial Thermometers

    Type 341 to 347 dial thermometers are local thermometers with a crimped-on ring cases. Cases, immersion tubes and connections are made of stainless steel. All devices comply with EN 13190 and meet the class 1 requirements. The devices are available in the nominal sizes from 63 to 250 mm. Through the crimped cases, the thermometers are permanently ...

    By SIKA Dr. Siebert & Kühn GmbH & Co. KG Office in Milton Keyne, UNITED KINGDOM. from Dial Thermometers Product line

  • Model TBV Type - Ball Valve

    HARTMANN VALVES ball valves of the TBV series find use when strict safety regulations require a dual pipeline shut-off. Designed for these applications, the HARTMANN VALVES TBV series combines two complete and independent shut-off systems ('Twin Ball Valve“) in just one housing: 0-bubble seal tight, and testable between the shut-off systems. ...

    By Hartmann Valves GmbH Distributor in Huntly, UNITED KINGDOM. from Ball Valve Product line

  • RS MAXPATCH - Lining Rehabilitation Systems

    In addition to RS Technik's complete lining rehabilitation systems, RS MaxPatch® is available for fast, trenchless, selective repair methods. RS MaxPatch® is a proven trenchless cured-in-place point repair system used to renew short sections of up to DN 500 mm diameter gravity-flow pipelines. The corrosion-resistant fiberglass composite ...

    By RS Technik AG Distributor in Dewsbury, UNITED KINGDOM. from Lining Rehabilitation Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you