Only show results available in Virginia? Ok

plastic separation plant equipment

  • Premium

    REDWAVE - Plastic Recycling Plant Solutions

    Plastic recycling competences: feeding system, shredding technology, screening technology, conveying technology, redwave sensor-based sorting technology, pressing technology. REDWAVE guarantees high throughput of materials with maximum recovery of materials achieving maximum return on the separated commodities. Different sensor systems can be ...

  • Premium

    Redoma - Model SE Series - Single Separators - Up to 6000 kg/h

    The separator forms the central part of a REDOMA cable recycling plant. It separates dry and granulated cable into its two components – metal and plastic – with high purity.

    By Redoma Recycling AB based in Malmö, SWEDEN. from Single Separators - Up to 6000 kg/h Product line

  • Plastic Separaton Plants

    This separation system was developed to provide the possibility for mechanical plastic recycling to detach mono-fraction plastics from mixed-plastic waste. The aim of a purity of variety that enables the re-use of secondary materials thus obtained for the production of new plastic products has been achieved.The process is based on the fact ...

    By PSR Industrieanlagen- und Verfahrenstechnik GmbH based in Waiblingen, GERMANY.

  • ECOMIN - Plastic Recycling Plants

    Ecomin employs TriFlo® system for separating materials which have different specific weight as plastics (PVC, PA, PP, ABS, PEHD, PET, PC). Due to different polymer chains, which compose plastic materials, a selective separation has to be made in order to obtain material suitable for the recycling. Plastic separation plant treats crushed ...

    By ECOMIN s.r.l. based in Genova, ITALY. from Plastic Recycling Plants Product line

  • Premium

    HARDEN - Model TL1316 - Pulper ropes recycling

    Ragger wires, also known as “pulper tails” and “pulper ropes”, are reject secondary raw materials that are created when waste paper is recycled. Ragger wires consists of the plastic trimmings, staples, tape, labels and baling wire found in baled post-consumer paper waste. It is made up of approximately 45% steel and 55% post consumer waste and ...

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • ANDRITZ MeWa - Recycling Plants for Metal Composites / Special Solutions

    Whether it’s metal/plastic compounds, profiles and sheets from production left-overs, metal turnings and used beverage cans: ANDRITZ MeWa can provide the appropriate recycling technology for any application. The solutions are designed for use with metal recycling in mind, from the individual shredding machine to the complete recycling plant ...

  • Model SRT 1 - Shredding and Separation Plant

    SRT 1 is first choice for the primary shredding and separation of E-waste, ASR, mixed metals and many more waste materials. swissRTec is able to tailor the system based on your specific requirements of throughput, input material and downstream processing. The unique advantage of the Kubota Vertical Shredder is its ability to liberate and downsize ...

    By swissRTec AG based in Kreuzlingen, SWITZERLAND.

  • Plastic Bottles Sorting Plant

    In preceding sorting plants light materials are separated in that way that the material stream plastic bottles is already enriched on a high level with the target fractions PET-clear, PET-light blue, PET green and PET. A combination of machinery for perforation and screening as well as conveying technology for equalization and isolation optimizes ...

    By AMB Technology GmbH based in Oschersleben, GERMANY. from Plastic Bottles Sorting Plant Product line

  • Ad Rem - Dense Medium Separation Plant

    Ad Rem owns the rights on a patented unique bi-directional dense medium barrel that proved to be the most accurate dense medium separator ever employed in the separation of a variety of materials ranging from vegetables to plastics and non-ferrous metals.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM. from Dense Medium Separation Plant Product line

  • ANDRITZ MeWa - Recycling Plants for Pulper Rags and Rejects

    Waste paper is usually delivered to paper mills in pressed bales held in shape by wires. The stock preparation process generates rags that comprise wires and other rejects. Rejects are all those materials that are not paper, such as plastics, textiles and metals. Depending on the requirements, ANDRITZ MeWa plants include several shredding stages ...

    By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY. from Recycling Plants for Pulper Rags and Rejects Product line

  • Waste Separation And Selection Plants

    ROT furnaces for MSW can be coupled to separation and selection lines COPARM, installed upstream of the furnace, to realize INTEGRATED PLATFORMS for MSW with emissions 'near to zero' and with recuperation of precious second materials ( Metals, Plastic scraps etc.) Here below the lay-out of the MSW PLATFORM with n.2 ROT200 lines with n.1 COPARM ...

    By ING.GALLARATI based in Broni, ITALY.

  • 3E - Waste plastic recycling plant

    Made by the company researching over 10 years, have very good estimation of the clients of domestic and foreign country, the washing line is our main product. This washing line including conveyor, crusher, screw loader, float tank, extra layer, centrifugal screen, fibre separator, and so on. It can produce the raw materials directly after ...

    By Guangzhou 3E Machinery Co., Ltd. based in Guangzhou, CHINA. from Waste plastic recycling plant Product line

  • ANDRITZ MeWa - Recycling Plants for Refrigerators

    ANDRITZ recycling plants for cooling devices can reclaim 90% of environmentally harmful greenhouse gases. A particular benefit is that even modern refrigerators – in which the insulation materials have been expanded using highly-explosive pentane gas – can be processed at the same time as CFC appliances without a risk of fire. The ...

    By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY. from Recycling Plants for Refrigerators Product line

  • Cryogen Plant

    To be able to re-use contaminated plastic and metal packaging, Nehlsen has developed a technology that can separate harmful residues, such as chemicals or oil, from sought-after raw materials like metal and plastic. This process can also recycle oil filters and composite materials made of plastic/metal and rubber/aluminium.

    By Nehlsen International based in Bremen, GERMANY.

  • Remav - Model LA 1200 & LA 1400 - Leightweight Separator

    With the patented REMAV light-weight separator (according to the BEYER system), they turn highly polluted building rubble or ballast into recyclable material in the blink of an eye. It separates the lightweight materials such as plastic, polystyrene, lightweight concrete or wood from the building rubble stone or concrete. The light weight ...

    By Remav GmbH based in Viernheim, GERMANY.

  • Airlift - Model AL200-E - Electric Separator

    The AL200E Electric is powered by a 30HP, 460 volt electric motor with variable frequency drive to provide a power source independent of screen plant hydraulics. The vacuum system works efficiently with most screening systems. Used in compost processing, recycling wood waste, construction debris, and at municipal waste sites and mulch yards to ...

    By Airlift Separator / Hawker Corporation based in Eugene, OREGON (USA). from Electric Separator Product line

  • Recycling Plants

    PSR recycling plants are designed to realize the highest possible degree of purity of the produced plastics. Using them for the production of new plastic products largely replacing virgin plastics by the conditioned plastics is our ambition. A big part of recycling plants carried out by us over the last 20 years has integrated the production of ...

    By PSR Industrieanlagen- und Verfahrenstechnik GmbH based in Waiblingen, GERMANY.

  • Adelmann - Model RPES - Electronic Scrap Recycling Plant

    The plant consists of pre-shredder, a separation unit, a post-shreeder, a separation for shredded plastic (foils, dust), iron, synthetic material and aluminuim/copper. Additionally a plant for CRT separation was integrated.

    By Adelmann Umwelt GmbH based in Karlstadt, GERMANY. from Electronic Scrap Recycling Plant Product line

  • Model MRF - Material Recovery Plants

    Sorting plants of various combinations and capacities: for paper, card and board material , for bio waste, for building waste, for mixed building waste, for household and industrial waste, for post consumer plastics, for paper and card separation.

    By Rodan Engineering Company Ltd. based in Leigh, UNITED KINGDOM. from Material Recovery Plants Product line

  • CORE - Model LTH - Density Separation Machine

    CORE LTH – The Air jig is used for separating materials of different specific density. UMS’ CORE LTH is the universal unit for separating materials of different weight according to grain size and shape. With this device, diverse materials like copper and aluminum or plastics and aluminum are being separated resulting in a high purity ...

    By Urban Mining Solutions GmbH based in Remscheid, GERMANY. from Density Separation Machine Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you