plastic-to-hydrocarbon equipment in Washington

  • Model D-16 - Plastic Valve

    This is the standard valve component for the Waterra Standard Flow inertial pump. Simply screw this valve on to the base of our 5/8' Waterra HDPE tubing and you have a fully functional inertial pump. Minimum well diameter: 1'

    By Waterra USA Inc. based in Peshatin, WASHINGTON (USA). from Plastic Valve Product line

  • Model D-32 - Plastic Valve

    The High Flow System is designed to be used in 2 inch wells or larger where a high pumping rate is desired or where very deep wells are encountered. This system is also an excellent well development tool in 2 inch piezometers. Consisting of a High Flow valve, either the 1.25' OD, acetal plastic D-32 or the stainless steel SS-32 and a length of 1' ...

    By Waterra USA Inc. based in Peshatin, WASHINGTON (USA). from Plastic Valve Product line

  • Model D-13 - Plastic Valve

    The Low Flow System is designed to be used in small diameter piezometers (usually 1.5' ID to 0.75' ID). It can provide flow rates of up to 1/2 gallon per minute and can lift water from up to 100 feet. This system consists of a low flow valve, either the acetal plastic D-13 foot valve or the stainless steel SS-13 foot valve and HDPE, LDPE or FEP ...

    By Waterra USA Inc. based in Peshatin, WASHINGTON (USA). from Plastic Valve Product line

  • Model D-25 - Plastic Valve

    This is the standard valve component for the Waterra Standard Flow inertial pump. Simply screw this valve on to the base of our 5/8' Waterra HDPE tubing and you have a fully functional inertial pump. Material: Delrin, Maximum Depth: 150', Tubing Size: 5/8' OD.

    By Waterra USA Inc. based in Peshatin, WASHINGTON (USA). from Plastic Valve Product line

  • Plastic or Styrofoam Cooler

    Plastic or styrofoam coolers are for the transportation of viable samples.

    By EMLab P&K Office in Bothell, WASHINGTON (USA). from Plastic or Styrofoam Cooler Product line

  • Cyclone - Model WSP-12V-1 - Plastic Submersible Pump

    12 volt engineered plastic submersible pump.The WSP-12V-1 Cyclone pump is capable of pumping up to 25 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

    By Waterra USA Inc. based in Peshatin, WASHINGTON (USA). from Plastic Submersible Pump Product line

  • Mini-Typhoon - Model WSP-12V-2M - Plastic Submersible Pump

    12 volt engineered plastic submersible pump.The WSP-12V-2M Mini-Typhoon® pump is capable of pumping up to 40 feet from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

    By Waterra USA Inc. based in Peshatin, WASHINGTON (USA). from Plastic Submersible Pump Product line

  • Model WMP-Series - Plastic-Bodied Magmeter

    The WMP-Series is a full-bore, plastic-bodied electromagnetic flow meter designed for flow and usage monitoring applications in 1, 2 and 3 inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals and fertilizers. It is light weight and easy to install or remove from the pipe for inspection*. With no moving ...

    By SeaMetrics, Inc. based in Kent, WASHINGTON (USA). from Plastic-Bodied Magmeter Product line

  • 20L Hydrocarbon (Fuel, Oil) Spill Kits

    Suitable for fuel, oil, petroleum, cooking oil & other liquid spills. In a convenient SLIMLINE Carry Bag, this kit is perfect for Truckies, Crane/Machinery Operators, Bus Drivers and Mobile Technicians.

    By Ecospill Office in Cockburn Central, WASHINGTON (USA). from 20L Hydrocarbon (Fuel, Oil) Spill Kits Product line

  • Model D-25 - Standard Flow Plastic Valve

    This is the standard valve component for the Waterra Standard Flow inertial pump. Simply screw this valve on to the base of our 5/8' Waterra HDPE tubing and you have a fully functional inertial pump.

    By Inertial Pumps Online based in Bellingham, WASHINGTON (USA). from Standard Flow Plastic Valve Product line

  • Model GR-KOR - Fiberglass Reinforced Plastic (FRP)

    FABCO's Fiberglass Reinforced Plastic (FRP) laminates are manufactured with thermosetting polyester or vinylester resins and various types of glass fibre reinforcing. Materials are carefully selected for each specific application. The fiberglass reinforcement is thoroughly saturated  with catalyzed resin to form a dense laminate with the ...

    By Fabricated Plastics Limited Office in Bellingham, WASHINGTON (USA).

  • Plastic Film Recycling System

    Impact Air, a CP Group partner, has the plastic FilmVac system which consists of a series of specially designed material collection hoods that are typically mounted in the ceiling of the sorting cabin above the waste belts. A series of collection hoods can be connected together via a range of ductwork, meaning all material is transported to a ...

    By Krause Manufacturing Inc (KMI) based in Bellingham, WASHINGTON (USA). from Plastic Film Recycling System Product line

  • Premium

    Model BS-724 - Hydrocarbon Hard Surface Cleaner

    This proprietary blend of non-ionic and an-ionic surfactants along with builders, solvents and beneficial bacteria come together to form our most powerful hydrocarbon degrader ever! Whether it is oil, benzene, toluene, ethyl benzene glycol, xylene, gasoline, diesel, stove oil, crude oil, motor oil, 724 is the safe, effective solution.

    By Simple Solutions Dist. LLC Distributor in Spokane, WASHINGTON (USA). from Hydrocarbon Hard Surface Cleaner Product line

  • Premium

    Sauereisen - Model No. 30 - Plastic Porcelain Material

    Sauereisen Plastic Porcelain No. 30 is an inorganic, chemically-setting, magnesium oxide base material which expands slightly while hardening to a porcelain-like body. No. 30 is used for assembling silverware and cutlery, insulating lead wires on electrical fixtures and sealing conduits to prevent the spread of explosive gas.

    By Sauereisen Inc. Distributor in WASHINGTON (USA). from Plastic Porcelain Material Product line

  • Carbon Dioxide Gas Purifiers

    Optimized for the high flows of process equipment, these modules significantly outperform carbon-based hydrocarbon traps.

    By VICI Metronics, Inc. based in Poulsbo, WASHINGTON (USA). from Carbon Dioxide Gas Purifiers Product line

  • Contaminant Traps

    Contaminant traps remove moisture, hydrocarbons, oxygen, mercury, or sulfur, for those applications with only one specific contaminant of interest. Moisture traps. Hydrocarbon traps. Oxygen traps. Mercury traps. Sulfur traps.

    By VICI Metronics, Inc. based in Poulsbo, WASHINGTON (USA). from Contaminant Traps Product line

  • Premium

    Wolverine - Plastic Manhole Inflow Protector

    The Wolverine Brand ® Plastic Manhole Inflow Protector Inserts are made of high density polyethylene and have been proven effective in reducing or preventing surface water inflow to the collection system, through the manhole lid. Operating and maintenance costs for plant equipment and pumps are minimized, due to reduced flow during heavy ...

    By Simple Solutions Dist. LLC Distributor in Spokane, WASHINGTON (USA). from Plastic Manhole Inflow Protector Product line

  • Absorbent - Model W™ - Oil-only Sorbent

    50 Liters (~10 lbs) of Absorbent W oil-only sorbent in a plastic bag. Absorbent W is designed to contain and control hydrocarbons (oil-based liquids) while repelling water. Absorbent W is made from wood pulp reclaimed from the manufacturing of paper products. Manufactured through a patented process, it absorbs oil immediately on contact while ...

    By Bowhead Environmental & Safety, LLC based in Spokane, WASHINGTON (USA). from Oil-only Sorbent Product line

  • Enviro-Klean - Thermal Desorber

    The Enviro-Klean thermal desorber is effective for removing hydrocarbon contamination from the soil. Hydrocarbons volatilize when heated to their boiling point and subsequently convert to water vapor and carbon dioxide in a thermal oxidizer. The net result is reusable clean soil.

    By Enviro-Klean Remediation Group Inc. (EKRG) Office in Blaine, WASHINGTON (USA).

  • 5 Slide Mailer

    Empty plastic slide holder which can hold up to 5 glass slides.

    By EMLab P&K Office in Bothell, WASHINGTON (USA). from 5 Slide Mailer Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you