Plate Clarifier Equipment
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
Mobile plate clarifier operating inside tank. The Hydro Quip Mobile Plate Clarifier uses inclined plate technology designed specifically for use in mobile treatment tanks (Frac Tanks). Each module is designed for flow rates up to 200 gpm. Several modules can be incorporated for flexibility to handle higher flow ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
Inclined Plate Clarifier with coated carbon steel. Hydro Quip’s Inclined Plate Clarifiers are designed and manufactured to provide for the precipitation and separation of suspended solids. Our design employs the use of a series of plates inclined at an angle of 45° or 55°. This specialized design ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
The continuous flow Inclined Plate Clarifier with Mix & Flocc Tank separates mechanical and chemical emulsions and colloidal contaminants from wastewater as a single flow-through operation. The use of polymers or other chemical additives will help precipitate the contaminants to the hopper compartment for ...
-
Manufactured by Water & Wastewater Equipment Company (WWE)based in USA
Metal finishers requiring high-efficiency solids removal from metal hydroxide wastes are turning away from the traditional large circular or rectangular clarifiers to Water & Wastewater Equipment Company’s line of Inclined Plate Clarifiers for these reasons: Up to 50% lower installed cost. Up to 90% less floor space requirements. ...
-
Manufactured by Wuxi Yosun Environmental Protection Equipment Co.,Ltd.based in CHINA
Typical lamella clarifier design consists of a series of inclined plates framework components, see first figure. The untreated feed (raw)water stream enters from the top of body side and flows down a feed channel underneath the inclined plates. Water then flows up inside the clarifier between the inclined plates. ...
-
Manufactured by Ground Effects Environmental Services Inc.based in CANADA
Removes suspended solids, clay, sand, metals and phosphorus. Removes suspended solids such as colloidal clay and river/lake organic matter. Facilitates heavy metals precipitation: iron, zinc, cadmium, lead, chrome and copper. Scrubber water solids and mineral extraction. Coal solids, fines and ash solids removal. Takes outs mill scale and solids in steel ...
-
Manufactured by Westlake Environmentalbased in USA
The Westlake Environmental Inclined Plate Clarifier (IPC) is designed for settling solids and precipitated metals. One of the more desirable features of the IPC is its compact design. The units easily fit in tight locations with low ceiling height and do not require expensive access platforms for maintenance. With proper chemical ...
-
Manufactured by M.W. Watermark LLCbased in USA
SPC-20 Incline Plate Clarifier Nominal Capacity: 20 GPM. HRS 1/4' Plate Material surface blasted to near white. Settling Plates -1/4 Grey PVC Schedule 80 grade ...
-
Manufactured by M.W. Watermark LLCbased in USA
SPC-40 Incline Plate Clarifier Nominal Capacity: 40 GPM. HRS 1/4' Plate. Settling Plates -1/4 Grey PVC Schedule 80 grade ...
-
Manufactured by Wastewater Evaporatorsbased in USA
The Inclined Plate Clarifiers are designed and manufactured to provide for the precipitation and removal of suspended material in waste steam. The IPC employs the use of a series of plates inclined at an angle of 55°. This specialized design allows the IPC to perform all of the functions of a conventional solids contact ...
-
Manufactured by Product Recovery Management, Inc.(PRM)based in USA
PRM manufactures Plate Clarifiers for enhanced solids removal from process streams. The raw process water enters the clarifier where it is dispersed evenly through the chamber. The collection surface of the plates allows solids to slide downward to the sludge hopper for removal while the clarified effluent exits ...
-
based in IRELAND
Final clarifier are utilised by Glan Agua Ltd. in both water and wastewater applications to allow any remaining biosolids to settle out of the wastewater at the end of the process. These solids are then removed from the hopper bottom of the clarifier and returned to the secondary treatment stage or onto the sludge treatment process in the ...
-
Manufactured by Monroe Environmental Corporationbased in USA
The Monroe Parallel Plate Vertical Clarifier is designed to provide low cost, efficient solids removal from a wide range of waste and process liquids. The inclined plate design allows the total gravity settling area to be as much as ten times more than the actual floor space occupied by the clarifier. Integral chemical mixing and ...
-
Manufactured by Monroe Environmental Corporationbased in USA
The Monroe Horizontal Plate Clarifier is one of the most versatile clarifiers available on the market. Because the unique Monroe parallel separator plate design effectively separates both settleable solids and floating materials, the Horizontal Clarifier can be used in place of a circular ...
-
Manufactured by Hydro Flo Technologies LLCbased in USA
The HydroFlo ClariMax inclined plate clarifier is a unique device in the world of clarification equipment. Our experience in clarifier design, and recent advancements in fluid dynamic modeling, have all been applied to make the HydroFlo ClariMax the most efficient clarifier available ...
-
Manufactured by Hydro Flo Technologies LLCbased in USA
The HydroFlo LS Series Inclined Plate Clarifier is designed to meet the needs of low volume industrial waste generators. The LS series clarifier is designed and configured to supply you with the most cost efficient design in the market ...
-
Manufactured by Ecomacchine S.p.A.based in ITALY
The sizing of the API tanks is made according to the AP (American Petroleum Institute) standards. Tank width: 1.5-4 mt Tank length: 5-20 ...
-
Manufactured by Lighthouse Filters, LLCbased in USA
Settling area is the most important design factor in a clarification system. A Plate Clarifier contains a series of inclined parallel clarifier plates. The settling area of a Plate Calrifier is the total of the areas projected on the horizontal plane by the clarifier plates. The ...
-
Manufactured by M.W. Watermark LLCbased in USA
Nominal Capacity: 5 GPM. HRS 3/16' Plate. Material surface blasted to near white. Settling Plates -1/4 Gray PVC Schedule 80 grade ...
-
Manufactured by M.W. Watermark LLCbased in USA
SPC-10 Incline Plate Clarifier Nominal Capacity: 10 GPM. HRS 3/16' Plate Material surface blasted to near white. Settling Plates -1/4 Grey PVC Schedule 80 grade ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you