Only show results in Virginia? Ok

pneumatic waste equipment

  • Premium

    Geotech - Model AP3 - Pump Pneumatic Positive Air Displacement Pump

    Pneumatic positive air displacement pump for harsh liquids in the landfill and remediation industries. The AP3 Top Inlet, Short AutoPump is designed for applications requiring an elevated inlet, such as pumping total fluids from wells contaminated with LNAPLs.

    By Geotech based in Leamington Spa, UNITED KINGDOM. from Pump Pneumatic Positive Air Displacement Pump Product line

  • Premium

    Presona - Smart Waste Baler

    If you want a baler that will perform with an optimized energy efficiency, choose the Presona baler. The correct capacity Presona baler to meet the customer’s requirements is always available. The Presona Baler Series consists of 6 basic models, the OH, EH, VH, CH, DH and XH. These letters refer to size of the feed opening. All models are ...

    By Presona AB based in Tomelilla, SWEDEN.

  • Premium

    Presona - Waste Extraction Systems

    Presona offers the total solution for rational and effective handling of production waste from the graphic industry, from paper and cardboard manufacturers and from the packaging industry. The Presona waste extraction plant always builds on the same principle.  Each specific plant is customized with respect to required air and material ...

    By Presona AB based in Tomelilla, SWEDEN.

  • Pneumatic Conveyor

    Four pneumatic methods can be utilized depending on the material to be conveyed, the conveying distance, the conveying volume and the process in question. By using one or any combination of these methods, it is possible to solve almost all the problems of pneumatic conveying in process plants.

    By Kopar Oy based in Parkano, FINLAND. from Pneumatic Conveyor Product line

  • Showcase

    FFP - Sludge Dewatering Filter Press

    Sludge dewatering using filter presses has become accepted as a reliable and efficient method of dewatering effluents and sludges from industrial and municipal waste treatment processes.

    By F.F.P. Systems Inc. based in Mississauga, ONTARIO (CANADA).

  • Smash-It - Pneumatic In-Drum Compactor

    Compacts waste to as low as 20% of original size (5:1 compaction ratio). Compacts waste in any standard 55 gallon drum. Meets OSHA safety requirements. Provides 3,400 or 5,000 lbs of compaction force, depending on model 

    By Air Cycle Corporation based in Lisle, ILLINOIS (USA).

  • Pneumatic Ejectors Pump

    The recognition that sanitary collection and disposal of domestic waste must be considered a necessity, bringing with it, the need for systems which could adequately and proficiently carry waste for treatment. This resulted in an underground network of collection lines resembling a large stream fed by many tributaries. The same basic waste ...

    By Carter Pumps, Inc., based in Englewood, NEW JERSEY (USA).

  • Rusmar - Model PFU 1600/40 - Pneumatic Foam Unit

    A completely self-contained and portable foam generating system designed to withstand the rugged demands and harsh elements found at remediation sites. Quick start-up time means that emission control is available when you need it. Recommended for medium to large size remediation projects, dredging operations and hazardous waste sites. Can be towed ...

    By Rusmar Inc. based in West Chester, PENNSYLVANIA (USA). from Pneumatic Foam Unit Product line

  • Pneumatic Conveying Systems

    Pneumatic Conveying is one of the most practical methods for moving large amounts of dry powdered, granulated, or pelletized materials. Product or waste materials with bulk densities ranging from 1 to 200 lb/ft3 are conveyed by being suspended in or forced by a gas stream in horizontal or vertical pipes. Low Pressure and High Pressure Systems are ...

    By Rees-Memphis, Inc. based in Memphis, TENNESSEE (USA). from Pneumatic Conveying Systems Product line

  • Pneumatic Conveyance Systems

    Pneumatic conveyance or air- material separation systems use high-velocity air to transport materials from process to process within a system. Specialized fans and blowers create the airflow needed to move the materials through enclosed metal ducting, often terminating in an air separator. These systems are also used to sort and separate different ...

    By Advanced Equipment Sales (AES) based in Souderton, PENNSYLVANIA (USA). from Pneumatic Conveyance Systems Product line

  • Altek - Model Spray Stop - Pneumatic Control Valve

    Pneumatic control valve, opens with air pressure and closes by mechanical spring pressure.

    By Altek International based in Elsham, UNITED KINGDOM. from Pneumatic Control Valve Product line

  • Phoenix - Industrial Pneumatic Panel

    The pneumatic Phoenix is a higher specification, rugged model and is recommended for high duty applications. The PLC-based control system is housed in a NEMA enclosure. Ideal for industrial, hazardous, hot and wet environments.

    By Zero Gravity Filters Inc. based in Brighton, MICHIGAN (USA). from Industrial Pneumatic Panel Product line

  • Smash It - Model A55-1001-6PB - Pneumatic-Powered Compactor

    Heavy Duty Construction. Simple Operation. Up to 3,400 lbs. of Force. Effortless Compaction. Rapid Cycle Time. 120 PSI System Maximum. Powder Coated. Non-Sparking Composite Ram Plate (Fiberglass & Resin).

    By American Compactor, Inc. (ACI) based in Mansfield, OHIO (USA). from Pneumatic-Powered Compactor Product line

  • Pentek SQUIRREL - Model III - Pneumatically Operated Scabbler

    Pentek’s SQUIRREL-III pneumatically operated scabbler scarifies concrete floors and slabs in an environmentally safe manner. The SQUIRREL-III is designed to tackle small jobs and to get into tight spaces near corners, wall/floor joints, floor penetrations, equipment pedestals, steps, and under protruding equipment. SQUIRREL-III is designed ...

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA). from Pneumatically Operated Scabbler Product line

  • Model PNE - Pneumatic Level Sensor

    The pneumatic level sensor PNE converts air pressure generated by the hydrostatic backpressure of the water level into a proportional, standard electrical signal. It is possible to correct the zero point and scaling using a single button. False settings and system errors are indicated via LEDs. The air dome or the bubble tube can be utilised in ...

    By Pfeiffer Electronic GmbH based in Greifenstein, GERMANY. from Pneumatic Level Sensor Product line

  • Vortex - Pneumatic Oil Filter Crusher

    The Vortex Pneumatic Oil Filter Crusher is a cost effective way to reduce your waste disposal costs, new environment agency rulings allow oil filters to be crushed to maximise oil recovery, the steel outers can then be sent for metal recycling instead of being classified as hazardous waste.

    By Vortex De-pollution (USA) LLC based in Denver, COLORADO (USA).

  • EPP - Pneumatic Pumping Stations

     EPP pneumatic sewage pneumatic station is device for pumping sewage with compressed air which refreshes the sewage and prevents putrefying during transport.

    By EkoWodrol Ltd based in Koszalin, POLAND.

  • Clean-Seal Pneumatic Plugs

    Designed for stack testing of drain, waste, and vent plumbing systems, Clean-Seal plugs thread into a standard test tee. The bladder is inflated and then water is introduced into the pipe. Upon test completion, deflate the bladder; water travels down the pipe, eliminating test water backsplash.

    By Cherne Industries based in Minneapolis, MINNESOTA (USA). from Clean-Seal Pneumatic Plugs Product line

  • Model IBE - Pneumatic Drainage Air System

    Complete Fluid Drainage Air System made by : ISE Fluid Drainage System composed by 5 air pumps for each specific fluid, PFT composed by 2 air pumps and an air drill, pantographed lift PM-30 with BRL arm to drain engine oil, brakes and differential complete with tubes.

    By Iris-Mec Srl based in Poviglio (Re), ITALY. from Pneumatic Drainage Air System Product line

  • Waste Conveying and Storing System

    Allied offers pneumatic conveying systems and storage bins for various applications in waste handling systems.

    By Allied Blower & Sheet Metal Ltd based in Surrey, BRITISH COLUMBIA (CANADA). from Waste Conveying and Storing System Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you