point-of-use filtration equipment in Germany

  • Premium

    HILCO - Portable Filters System

    HILCO portable filters are an economical solution for removing water and particulate from oils, fuel and other fluids. Filters can be built to ASME Code standards. Hilco portable filters can be used for many different fluids, including: Mineral-based lubricating, hydraulic, and insulating oils Synthetic lubricating and hydraulic (EHC) fluids Fuel ...

    By Hilliard Corporation Office in Duesseldorf, GERMANY. from Portable Filters System Product line

  • Model VC 400 - Filtration

    Filtration without the use of filtration adjuvants, Fully automated discharge of swarf and grinding sludge, Low residual moisture in the filter cake, Filter band cleaning device made of stainless steel, Filter pore size ›50 µm

    By MKR Metzger GmbH based in Monheim, GERMANY. from Filtration Product line

  • Model VC 200 - Filtration

    Filtration without the use of filtration adjuvants, Fully automated discharge of swarf and grinding sludge, Low residual moisture in the filter cake, Filter band cleaning device made of stainless steel, Filter pore size ›50 µm

    By MKR Metzger GmbH based in Monheim, GERMANY. from Filtration Product line

  • RSF Genius - Fully-Automatic, Pressure-Constant, Permanent Process Consistency

    With regard to achievable product quality, economic efficiency and in terms of operator and maintenance friendliness, the RSFgenius offers unrivalled possibilities. This fully-automatic and pressure-constant filtration system can be used in virtually any application, for automation of the production process and for the manufacture of a high ...

  • JVK - Chamber Plates

    A long working life is achieved due to most modern production techniques as well as to an excellent chemical resistance of the used thermoplastic materials even under high temperature.

    By JVK Filtration Systems GmbH based in Georgensgmünd, GERMANY. from Chamber Plates Product line

  • Spandex Manufacture

    In the manufacture of spandex, ultra-fine filtration is used not only for the removal of solid inhomogeneities but also to retain or destroy gel-like contaminations. Moreover, process consistency regarding pressure and temperature is an essential prerequisite for an efficient production. High throughput rates make a fully-automatic filtration ...

    By Gneuß Kunststofftechnik GmbH based in Bad Oeynhausen, GERMANY. from Spandex Manufacture Product line

  • Technical Yarn

    In the manufacturing of technical yarns, ultra-fine filtration is used not only for the removal of solid inhomogeneities, but also to retain or to destroy gel-like contamination. In some cases, very high spinning temperatures are encountered, making a very short dwell time of the melt necessary. High throughput rates make a fully-automatic mode of ...

    By Gneuß Kunststofftechnik GmbH based in Bad Oeynhausen, GERMANY. from Technical Yarn Product line

  • Premium

    Model MG - Filtration Disc

    The disc is a flat ring, grooved in both sides and manufactured and made in plastic material; it is resistant to all the products normally used in agriculture and industry. The different models of discs in the market differ by the material used in its manufacturing, its geometry and dimensions, as by the characteristics of its grooved channel.

    By Sistema Azud, S.A. Office in Gingen An Der Fils, GERMANY. from Filtration Disc Product line

  • PET Bottle Flakes

    The economic attraction of using PET bottle flakes in place of virgin material mainly depends on the efficient processing of the recycled material that is used. Melt filtration is a decisive aspect in this context. With more than 250 filtration systems sold for processing PET bottle flakes, Gneuss is one of the market leaders in this field. The ...

    By Gneuß Kunststofftechnik GmbH based in Bad Oeynhausen, GERMANY. from PET Bottle Flakes Product line

  • Blown Film

    In blown film manufacturing, besides the reliable removal of solid and soft particles in the melt, process-constant production even during screen changes or during the use of reclaim is particularly important. Moreover, the filtration system must exclude the possibility of leakage. For this, Gneuss Filtration Systems offer tailor-made solutions ...

    By Gneuß Kunststofftechnik GmbH based in Bad Oeynhausen, GERMANY. from Blown Film Product line

  • Accessories for Light Fluid Separators

    All KLARO separator systems can be expanded with an upstream sludge collector. Additional sludge collectors are used for pre-filtration of contaminants contained in the water, whose density is greater than that of water. The contaminants are deposited on the bottom. In addition, larger floating material is already stopped here. The efficiency of ...

    By KLARO GmbH based in Bayreuth, GERMANY. from Accessories for Light Fluid Separators Product line

  • Minimesh - Model S - Metal Filter Cloth

    Precision Pores for the Highest Demands in Industrial Filtration. MINIMESH® Metal Filter Cloth from HAVER & BOECKER has been used as filtration media for over 100 years. Already in 1954 it was used in space within NASA’s aviation and aerospace programme. With their once previously impossible-to-achieve filter fineness, MINIMESH ...

    By HAVER & BOECKER based in Oelde, GERMANY. from Metal Filter Cloth Product line

  • Biotrickling Filters

    Biotrickling filters are used for applications in which is no space for a biofilter, where the efficiency of a biofilter is not sufficient, or in the presence of ph-relevant compounds. The process of biotrickling filtration is, as is also the case with biofilters and bioscrubbers, a biological way of air treatment whereas the pollutants are not ...

    By Tholander Environmental Engineering based in Viernheim, GERMANY.

  • Profiles Application

    In profile manufacture, in addition to the removal of solid inhomogeneities, filtration must ensure permanent process and product consistency. Also, material costs can be reduced by using recycled material. For this, Gneuss Filtration Systems offer tailor-made solutions and make cost reductions and top qualities possible.

    By Gneuß Kunststofftechnik GmbH based in Bad Oeynhausen, GERMANY. from Profiles Application Product line

  • Sheet For Semi-finished Product

    In sheet manufacture, in addition to the removal of solid inhomogeneities, filtration must ensure permanent process and product consistency. Also, material costs can be reduced by using recycled material. For this, Gneuss Filtration Systems offer tailor-made solutions and make cost reductions and top qualities possible.

    By Gneuß Kunststofftechnik GmbH based in Bad Oeynhausen, GERMANY. from Sheet For Semi-finished Product Product line

  • Tubes Application

    In the manufacture of tubes, in addition to the removal of solid and gel-like inhomogeneities, filtration must assure permanent process and product consistency. Depending on the application, material costs can be reduced by the use of recycled material. Gneuss Filtration Systems offer tailor-made solutions and permit cost reductions and top ...

    By Gneuß Kunststofftechnik GmbH based in Bad Oeynhausen, GERMANY. from Tubes Application Product line

  • Pipes Application

    In the manufacture of pipes, in addition to the removal of solid contaminants, filtration must ensure permanent process and product consistency. With some types of pipe, material costs can be reduced with the use of recycled material. For this, Gneuss Filtration Systems offer tailor-made solutions and make cost reductions and top qualities ...

    By Gneuß Kunststofftechnik GmbH based in Bad Oeynhausen, GERMANY. from Pipes Application Product line

  • JVK - Membrane Chamber Plates

    JVK is offering long-term  experience on the development, production and application of membrane chamber plates. In 1964 already the first trials had a chemical plant with the first membrane chamber plates. JVK started serias production of membrane chamber plates equipped with elastomer membranes in 1968. JVK membrane chamber plates are ...

    By JVK Filtration Systems GmbH based in Georgensgmünd, GERMANY. from Membrane Chamber Plates Product line

  • Flat & Cast Film

    For the production of flat and cast film, the reliable removal of solid and gel-like particles and a fully-automatic filtration system, which operates pressure-constant and eliminates production interruptions, is very important. With regard to cost competitiveness it is necessary to maximize the use of reclaim. For these applications Gneuss ...

    By Gneuß Kunststofftechnik GmbH based in Bad Oeynhausen, GERMANY. from Flat & Cast Film Product line

  • Classical Water Filtration System

    Classic alternatives to this modern membrane separa tion are gravel and multi-layer filters. Gravel or multi-layer filters are used to remove suspended solids, caused either by a previous oxida tion process, through defective pipes or by flocculation or precipitation.

    By EUWA H.H. Eumann GmbH based in Gärtringen, GERMANY. from Classical Water Filtration System Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you