Only show results available in Virginia? Ok

polymer feed system equipment

  • Model DCS Series - Polymer Feed Systems

    The DCS will feed solution, emulsion and dispersant polymers, whether they are cationic, anionic, or non-ionic. By providing initial high shear mixing, followed with additional aging, the DCS will develop even the most difficult polymers to their fullest dewatering potential online!! Standard units are Nema 4X rated. Explosion proof or custom ...

    By Design Controls LLC based in Houston, TEXAS (USA). from Polymer Feed Systems Product line

  • Model DCS-MD Series - Polymer Feed Systems

    The DCS-MD series of polymer feeders have make-down cabability. By utilizing the same activation process utilized in our DCS feeders the DCS-MD offers the versatility found only in batch feed systems. Batch feed applications are desirable where high pressure, high volume, or additional aging is required (some anionics). With neat polymer feed ...

    By Design Controls LLC based in Houston, TEXAS (USA). from Polymer Feed Systems Product line

  • PolyBlend - Model PB Series - Polymer Feed System

    This original PolyBlend® PB Series unit offers more for less by providing a compact design and maximum polymer activation with an innovative multi-zone mix chamber that provides uniform dispersion energy at the moment of initial wetting.

    By Indachem Inc. based in Toronto, ONTARIO (CANADA).

  • PolyBlend - Model M-Lo Series - Polymer Feed System

    The PolyBlend® M-Lo Series liquid polymer feed system provides consistent and accurate dosage to improve polymer efficiency. It offers all of the benefits of the best available polymer preparation system at a competitive price. The ready-to-install system provides consistent and accurate dosage and improves polymer efficiency. Seven models are ...

    By Indachem Inc. based in Toronto, ONTARIO (CANADA).

  • PolyBlend - Model DP500 - Dry Polymer Feed System

    The PolyBlend DP Series is the finest dry polymer feed system available by reducing polymer consumption by 25% or more while substantially improving polymer performance in terms of sludge dryness, solids capture, water clarity, drainage / retention, or any other measure. Up to 20lbs (9.1 kg) /hr dry polymer based on a 0.75% solution and two (2) ...

    By Water Process Solutions Limited based in Aylseford, UNITED KINGDOM. from Dry Polymer Feed System Product line

  • HydroCal - Liquid Polymer Feed System

    The HydroCal Polychem System is the ultimate in simplicity and reliability. The Polychem unit uses low power, takes up minimal space, requires little maintenance, and operates unattended. Various size units cover output ranges from 0.1 to 10 gph neat polymer.

    By HydroCal Inc. based in Laguna Hills, CALIFORNIA (USA). from Liquid Polymer Feed System Product line

  • Aslan - Model LF Series - Polymer Make Down / Make Up Equipment

    Aslan offers two lines of Dry Chemical Feeders to meet a wide variety of customer requirements. The DFC and DFC Mini series provides a continuous feed of aged polymer or chemical thereby eliminating the need for an age tank and its associated mixer. The DF series is a more traditional batch makedown system. Liquid polymer can be made down with ...

    By Aslan Technologies based in Burlington, ONTARIO (CANADA). from Polymer Make Down / Make Up Equipment Product line

  • Premium

    ProMinent PolyRex - Metering Systems

    Capacity range of up to 3,820 l/h. The metering system PolyRex is a double-decker batching station for the processing of liquid and powdered polymers. It consists of the feed and mixer unit and the two stainless steel double-decker tanks. The polymers used are ideally utilised.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY. from Metering Systems Product line

  • PolyBlend - Model HMZ - Automated Polymer Liquid Feed Systems

    The PolyBlend systems are automated polymer feed systems for precise control and economical performance of liquid grade polymers. Polyelectrolytes require specifically designed energy regimes during preparation to attain the correct physiochemical state in solution to perform the tasks they were designed for.

    By Water Process Solutions Limited based in Aylseford, UNITED KINGDOM. from Automated Polymer Liquid Feed Systems Product line

  • Dry Polymer Systems

    IPM Systems offers dry polymer feed systems ranging from low to high capacity. Dry polymer systems are an engineered product requiring a thorough understanding of application requirements and customer expectations. Each IPM Systems Dry Polymer system design is carefully reviewed based on polymer dosage requirements, dry polymer storage ...

    By Indachem Inc. based in Toronto, ONTARIO (CANADA).

  • Liberty - Model LL2 Series - Polymer Feed and Chemical Injection Pump

    The LL2 PC Pump is an ideal low-flow Progressive Cavity Pump for polymer feed, chemical feed and sampling/dosing applications. The LL2 design has been in use in the chemical injection and wastewater polymer feed now for decades by offering precise, pulseless fluid injection control that only a PC Pump can provide polymer injection in wastewater ...

    By Liberty Process Equipment, Inc. based in Arlington Heights, ILLINOIS (USA). from Polymer Feed and Chemical Injection Pump Product line

  • CHEMICAL FEED SYSTEMS

    World Water Works manufactures a coagulant and flocculant makedown feed system. The coagulant feed system is complete with an automatic simply dilution system to assure optimum chemical blending. The flocculant makedown and feed system is equipped with WWW’s Birdfeeder system which provide assured supply of the polymer to the chemical feed ...

    By World Water Works, Inc. based in Oklahoma City, OKLAHOMA (USA).

  • Chemical Feed Systems

    Chemical Feed Systems generally consist of a steel base “skid” which a chemical storage tank and pumps are mounted too which then Feed or “Inject”, “Dose” chemicals into the process at a precise rate. There is an endless list of chemicals and applications these are used for such as phosphates for boiler water ...

    By Johnson March Systems, Inc. based in Ivyland, PENNSYLVANIA (USA).

  • Excell - Model 6000A Series - Polymer Feeder

    The Series 6000A Polymer Feeder includes an aging tank for improved polymer effectiveness. The tank volume is approximately one gallon. The Series 6000A is specifically designed for systems that have low polymer feed rates.

    By Excell Feeders Inc based in Somerset, NEW JERSEY (USA). from Polymer Feeder Product line

  • Deskins - Liquid Polymer Activation System

    The Deskins liquid polymer feed and control stations are designed to provide maximized polymer performance without the hassles and headaches these applications cause for water treat-ment professionals.

    By Deskins based in Fishers, INDIANA (USA).

  • Ulrich-Rotte - Feeding Conveyors

    After weighing of the compound ingredients is complete, the conveyor of the polymer scale advances to hand over the material to the feeding conveyor belt.All system dimensions and conveyor speeds can be designed to meet your individual production needs.

    By Ulrich Rotte Anlagebau und Fördertechnik GmbH based in Salzkotten, GERMANY.

  • Aslan - Model DFC Mini - Continuous Polymer Makedown systems

    The DFC MINI Tote Series of Continuous Polymer Makedown systems is the complete answer to dry polymer make down when feeding low volumes per day. A completely aged and activated solution can be prepared with a DRY polymer source. The system is designed to run unattended between bulk fillings of the hopper. In addition, the DFC Mini Series feeders ...

    By Aslan Technologies based in Burlington, ONTARIO (CANADA). from Continuous Polymer Makedown systems Product line

  • Alumer - Alum Polymer Blend

    Alumer™ is USALCO’s blend of iron-free Aluminum Sulfate (Alum) with a polymer. It is used for water treatment facilities, including drinking water and industrial make up water. USALCO’s proven ability to blend iron-free, low contaminant alum with a variety of highly effective polyelectrolytes ...

    By Usalco, LLC based in Baltimore, MARYLAND (USA).

  • Excell - Model 7000 Series - Dry Polymer Auger Feeder

    The EXCELL Series 7000 Dry Polymer Auger Feeder is engineered to  provide a reliable means of feeding dry polymers and other difficult to feed materials. The material being fed is vacuumed by the Polyductor suction air flow. This prevents polymer build up. The feed rate is controlled by variable speed gear motor. The feeder is easy to operate ...

    By Excell Feeders Inc based in Somerset, NEW JERSEY (USA). from Dry Polymer Auger Feeder Product line

  • MYEP - Model Polymeer Dosing - Automatic PAM/PAC Feeding Device

    Automatic Polymer Dosing System is a continuous polymer makeup and dosing equipment. The equipment can mix the polymer fully with high efficiency, and then the homogeneous activated polymer can be ready for further treatment. Widely applied as the supporting equipment of sludge dewatering equipment in municipal wastewater, slaughtering, chemical ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you