Positive Displacement Pump Equipment Near Niger
-
Manufactured by QED Environmental Systemsbased in USA
Designed for wells as small as 2 inches in diameter, the AutoPump AP2 and AP3 are air-powered, positive displacement pumps activated by an internal float in response to the natural well ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The BPM Series is a mobile version of the standard BP Series pump. It is mounted on a mobile skid unit for easy movement, allowing it to be used across multiple production lines and locations, ideal for food manufacturers producing short runs of specialist products. With the BPM Series, customers can enjoy the benefits of a BP Series pump ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS BPSC Series is specifically designed for highly viscous materials such as pastes and particularly those which are produced and packed at low temperature. The product’s thickness can make it hard to prime the pump. To overcome this, the HRS BPSC uses a gravity-fed hopper, together with a screw conveyor, to feed product into the ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
HRS BP Series piston pumps are hydraulically or pneumatically operated positive displacement pumps that transfers mechanical energy to pressure. A hygienic design incorporates a separator fitted between the piston and the hydraulic chamber to ensure no contact between the product and the hydraulic oil. Once the ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS BPH Series is a horizontal version of the BP Pump for use with products with larger sized particulates. The pump is mounted horizontally and inlet is vertical. The standard clap valve is replaced with an automatic ball valve. Also comes with the option of a feed ...
-
Manufactured by Serfilco International Ltdbased in UNITED KINGDOM
SERFILCO Progressive Cavity pumps are engineered to transfer high viscosity materials from drums, tanks and IBC"s. Utilizing the principle of positive displacement, these pumps deliver a continuous flow with little product degradation. The series 700 (Industrial) and series 800 (Sanitary) pumps can transfer ...
-
Manufactured by Serfilco International Ltdbased in UNITED KINGDOM
For renewal of: Hydraulic fluids / Lubricating oils. Cutting fluids / Oil & water based coolants. EDM - dielectric fluids / Synthetic oils. Performance: 180-600 ...
-
Manufactured by Ampco Pumps Companybased in USA
The ZP1 Pump is the industry workhorse. With a proven design and the added features that Ampco Pumps offers, the ZP1 is a simple choice. Popular worldwide, the ZP1 has a large installed base in both sanitary and non-sanitary applications. With seal modifications like the PTFE double lip seal the ZP1 is dedicated to the toughest ...
-
Manufactured by Piedmont Pacific Corporationbased in USA
Style K coupling offers favorable corrosion resistance and represents an economical choice since it is constructed from 316 alloy. Better suited for brackish and fresh water, the Style K coupling will perform well under pressures between 300 & 450 psi. Consult Piedmont application engineering for guidance on the selection of plastic or metal alloy for your ...
-
Manufactured by Ampco Pumps Companybased in USA
Continuing to bring innovation to the sanitary pump market, Ampco Pumps has enhanced the traditional design of the popular ZP1 pump with the patented ZP1+ positive displacement pump. This advanced design changes the position of the dynamic O-ring for better performance and faster ...
-
Manufactured by Ampco Pumps Companybased in USA
The ZP2 Series with its stainless steel gearcase, like all Ampco positive displacement pumps, is built for CIP-ability with enclosed rotor nuts. It is designed to withstand higher pressures with its larger 17-4ph stainless steel shafts. In fact, the ZP2 is capable of withstanding pressures of up to 500 PSI and is 3A ...
-
Manufactured by Mavitec Green Energybased in NETHERLANDS
A piston pump is a type of positive displacement pump that uses a piston or plunger to move the organic soups through a cylinder. It works by using the motion of a piston or plunger to create a vacuum at the pump inlet, which draws in the organic soups. The organic soup is then pushed through the ...
-
Manufactured by Mavitec Green Energybased in NETHERLANDS
A progressive cavity pump is a type of positive displacement pump that uses a rotating helical screw-shaped rotor to move fluids through a fixed stator. As the rotor turns, it traps a fixed volume of fluid and moves it through the stator and out of the pump. Progressive cavity pumps are capable ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
PDP series positive displacement plunger dosing pump are manufactured according to API standard 675. Multiplex drive units with different performances can be coupled between them, independently from the size and stroke number. Stroke adjustment can be carried with the pump at rest or in operation. Accuracy is better than 1% from ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Positive displacement blower for industrial high vacuum technology. Aerzen vacuum blowers with hermetically sealed drive (HM) are designed for conveying neutral and aggressive gases and are used in industrial high vacuum technology. Convincing efficiencies and high reliability characterise this ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Positive Displacement Blower for Industrial High Vacuum Technology. Vacuum-tight stage for system manufacture with ATEX certification for zone 0. Variable direction of flow vertical and horizontal. Delta p up to 200 mbar possible. With 19 performance levels, the largest series on the market. ...
-
Manufactured by C.M.O. POMPE s.n.c.based in ITALY
The CMO pumps with worm feed screw belong to the rotating positive-displacement pump category. With simple construction, the pumps are intended above all for pumping dense and/or viscous ...
-
Manufactured by Osmo Sistemi S.r.l.based in ITALY
These family of R.O. units comprises custom designed systems, which are available in sizes from 24 m³/day to 1000 m³/day. All sea water systems are designed by experienced engineers with high quality materials, pump power source, control systems and with a size developped according to the ...
-
Manufactured by C.M.O. POMPE s.n.c.based in ITALY
The MN series pumps belong to the rotating positive-displacement pump category. The MN series has been perfected with the aim of achieving maximum performance in line with such compact dimensions and a highly competitive price. The reduced weight and compact dimensions allow this pump to be used in restricted ...
-
Manufactured by C.M.O. POMPE s.n.c.based in ITALY
The CMO pumps with worm feed screw belong to the rotating positive-displacement pump category. With simple construction, the pumps are intended above all for pumping dense and/or viscous ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you