Power Plant Water Treatment Equipment In Europe
-
Manufactured by WatMan Engineering Ltd Oybased in FINLAND
Power plants require water treatment systems that are extremely reliable and produce clean end products. It is vital that the functions of the power plant, including the water treatment, are stable and reliable. We believe such stability can only be achieved with ...
-
Manufactured by ENTA Treatment Systems Engineering Contracting Corporationbased in TURKEY
Applications: Water supply, irrigation, process plants, chemical, pharmaceutical, cosmetic, paper, textile, construction, plastic, rubber, paint, drink, sprinkler, liquid circulation, central heating, power plants, water treatment, ...
-
Manufactured by Peckwomy Industrie Control System GmbHbased in GERMANY
Adapted to the 90 ° rotation of the ball valve, butterfly valve, damper baffle and other suitable 90 ° rotation of the equipment to meet a variety of industrial automation control piping requirements. It can be widely used in power plants, petroleum, chemical, metallurgy, power plant desulfurization, ...
-
Manufactured by Samsun Makina Sanayi A.S. (SMS)based in TURKEY
Butterfly valves are designed for many areas such as power plants, water supply facilities, treatment facilities and the chemical industry in order to cut off, throttle or regulate the flow. SMS butterfly valves are designed according to EN 593 (DIN 3354) ...
-
Manufactured by Poliester Cevi d.o.o.Pribojbased in SERBIA
A part of product assortment is comprised of filters for wastewater treatment, depending on the water treatment type and water application: with contact filtration of the river water, water recycling from the steelmill and steam power plants, tertiary filtration, ...
-
Manufactured by F.Nencini Srlbased in ITALY
Valves for maintenance or safety purposes, they are engineered and customized to the special needs of hydroelectric power plants. Used as isolation device, they provide tight shut-off when closed and little pressure loss when open. Relatively easy to operate, they require limited room for installation. Large sizes are designed with biplane ...
-
Distributed by Coulton Instrumentation Ltdbased in UNITED KINGDOM
The Fuji Electric FCX-AII V5 series of differential pressure transmitters use a silicon micro-capacitance cell proven on thousands of difficult applications. Fuji Electric transmitters are installed in harsh environments on oil pipelines, power stations, gas compressor stations, water treatment plants and steel plants.They have ...
-
Manufactured by KSR Kuebler Niveau-Messtechnik GmbH - a member of the WIKA groupbased in GERMANY
The model BGU magnetic switches serve to detect the limits of filling levels in bypass level indicators. They generate a binary signal which can be fed to down-stream signalling or control equipment. Bistable versions enable the storage of ...
-
Manufactured by Vonen Oy Ltd.based in FINLAND
VONEN is world’s biggest provider of Low-Pressure-Drop CO2 Scrubbers and CO2 Absorbers for demineralized water tank and other storage tank vents. Over 300 units of VONEN CO2 Scrubbers are installed at power stations and water treatment plants in Europe, the Middle East, Africa and the American continent. ...
-
Manufactured by KSR Kuebler Niveau-Messtechnik AGbased in GERMANY
The model BGU magnetic switches serve to detect the limits of filling levels in bypass level indicators. They generate a binary signal which can be fed to down-stream signalling or control equipment. Bistable versions enable the storage of signals. The magnetic switches are mounted directly to the bypass level indicator with a tightening strap or to the magnetic roller display with sliding ...
-
Manufactured by Argal Pumpsbased in ITALY
Highly resistant to chemicals and corrosive agents, this special pump was designed to run into waste and contaminated water treatments as well as into the heaviest applications. The entire construction made of fiberglass offers a very high resistance, great robustness and a large range of temperatures from - 35°c to +40°c without ...
-
Manufactured by Argal Pumpsbased in ITALY
Highly resistant to chemicals and corrosive agents, this special pump was designed to run into waste and contaminated water treatments as well as into the heaviest applications. The entire construction made of fiberglass offers a very high resistance, great robustness and a large range of temperatures from - 35°c to +40°c without ...
-
Manufactured by Imesa S.A.based in SPAIN
Imesa is one of the important agents in the renewable energies sector thanks to its equipment for hydroelectric power stations and water treatment plants, especially its well-known automatic trash rack, specifically designed by our engineering department depending on each power station’s needs. ...
-
Manufactured by Sera GmbHbased in GERMANY
sera diaphragm pumps are oscillating displacement pumps for dosing liquids. The medium to be pumped is separated from the drive by a diaphragm. This is thus protected from damaging influences of the medium. They are used everywhere where leak-free and exact dosing is important, such as for aggressive, odorous, abrasive, radioactive, flammable, viscous or toxic media. Delivery rate adjustment by ...
-
Manufactured by ASA Srlbased in ITALY
Orifice plate Asameters, model O, are calibrated measuring devices suitable for liquid, gas and steam even in extreme operating conditions (high temperature, high pressure and corrosive liquids). They are manufactured and designed individually according to standard DIN EN ISO 5167 and ASME MFC-14M and provide excellent accuracy and a very wide range of flow rates through the configuration with an ...
-
Manufactured by KSR Kuebler Niveau-Messtechnik GmbH - a member of the WIKA groupbased in GERMANY
Level transmitters with a magnetostrictive, high-resolution measuring principle are used for continuous level measurement of liquids and are based on determining the position of a magnetic float following the magnetostrictive principle. The level transmitters are mounted on the outside of a bypass level ...
-
Distributed by Coulton Instrumentation Ltdbased in UNITED KINGDOM
Fuji Electric V5 Gauge Pressure Transmitters are high performance cost effective devices used where long term accuracy and reliability is a ...
-
Manufactured by Ecomacchine S.p.A.based in ITALY
Diameter: 15-45 m. Peripheral drive clariflocculator with slow ...
-
Manufactured by Argal Pumpsbased in ITALY
This series of thermoplastic or fluorinated polymers pumps is available in both magnetic drive setting and mechanical seal for pumping various chemical liquids even if laden with impurities and suspended solids. Mainly by the quantity and quality of these, you can choose the setting that better suits you. A patented system for dry running without damage is available for the magnetic drive ...
-
Manufactured by Hidrofilt Ltd.based in HUNGARY
The precondition of molecular filtration - desalination - carried out with reverse osmosis membranes is that certain parameters of the water to be treated, such as suspending materials, iron, manganese, oxidants, organic materials, concentrations of microorganism cannot exceed the limit values required for the safe operation. In order to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you