pressure pipe equipment in South Africa

  • Model PE2708 - Gas Distribution Pressure Pipe System

    A reliable gas distribution system requires uncompromised quality from your pipe supplier and the utmost in safety, durability and integrity in your pipe. Polyethylene gas pipe is the preferred choice for natural gas distribution. With Dura-Line PolyPipe®, we offer pipe that is flexible, lightweight, non-toxic and environmentally safe. Our ...

    By Dura-Line Corp Office in SOUTH AFRICA. from Gas Distribution Pressure Pipe System Product line

  • Flange Connection Tite Liner

    Tite Liner flange fittings have been used since 1985 to provide a tight seal and restrained joint in pressures up to and over 5,000 psi.  Each raised face steel flange is machined to match the inside diameter of the steel pipe and inspected to verify that the raised face dimension is correct.  A radius that matches the radius of the ...

    By United Pipeline Systems Office in Elandsfontein, SOUTH AFRICA.

  • Ecomaster - Model 550M - Pressures Units

    Using the operating pressures of up to 3000 bar and volumetric flow rates of up to 186 l/min, this line provides ideal tools for cleaning tanks, sewage systems, pipes with big volumes, and much more. The pressure and rotation speed control provides for a long service life with minimal fuel consumption. The WOMATIC 4 automatic equipment condition ...

    By WOMA GmbH Office in Pinetown, SOUTH AFRICA. from Pressures Units Product line

  • Ecomaster - Model D 250M - Pressures Units

    Using the operating pressures of up to 3000 bar and volumetric flow rates of up to 40 l/min, this line provides ideal tools for cleaning tanks, sewage systems, pipes with big volumes, and much more. The pressure and rotation speed control provides for a long service life with minimal fuel consumption. The WOMATIC 4 automatic equipment condition ...

    By WOMA GmbH Office in Pinetown, SOUTH AFRICA. from Pressures Units Product line

  • Premium

    WesTech CleanWash™ - Model SWP/CPS - Screw Wash Press and Counter Pressure Screw

    Unlike other screw wash presses in which the design of the discharge pipe creates the back pressure necessary to dewater screenings, WesTech's CleanWash™ Screw Wash Press and Counter Pressure Screw regulates exactly the right amount of back pressure to meet the highly variable influent. The positive conveyance of the screenings after each washing ...

    By WesTech Engineering, Inc. Office in Honeydew, Roodepoort, SOUTH AFRICA. from Screw Wash Press and Counter Pressure Screw Product line

  • Pressure Reducing Valves

    There are two types of water pressure reducing valves, direct acting and pilot operated; both of which use globe or angle style bodies, with new developments available in an Axial flow configuration. Valves used on smaller piping diameter units are normally cast from brass; while larger piping diameter units are made from ductile iron or steel. ...

    By Ultra Control Valves based in Eastleigh, SOUTH AFRICA.

  • Model 03-Line 250 bar - High Pressure Pumps

    Operating pressures up to 3625 psi/250 bar and rated volume up to approx. 400 l/min make this series a specialist for de-scaling operations as well as drain and pipe cleaning. The series, developed in keeping with the ATEX- and API-standards*, has a modular design, which opens up a variety of possibilities,allowing you to vary the output ...

    By WOMA GmbH Office in Pinetown, SOUTH AFRICA. from High Pressure Pumps Product line

  • Ecomaster - Model D 400Z - High Pressure Units

    Using the operating pressures of up to 1500 bar and volumetric flow rates of up to 605 l/min, this line provides ideal tools for cleaning tanks, sewage systems, pipes with big volumes, and much more. The pressure and rotation speed control provides for a long service life with minimal fuel consumption. The WOMATIC 4 automatic equipment condition ...

    By WOMA GmbH Office in Pinetown, SOUTH AFRICA. from High Pressure Units Product line

  • Premium

    NIR-Online - Pipe Solution

    BUCHI NIR-Online Pipe Solution gives rise to straightforward installation of our Process Analyzers to pipelines. Maximum installation flexibility is achieved by direct integration of our stainless steel adapters into the pipeline, thus separating the analyzer from the product flow. Our dedicated solution allows easy and reliable real-time ...

    By BÜCHI Labortechnik AG Distributor in Halfway House, SOUTH AFRICA. from Pipe Solution Product line

  • Grit Removal - Pista Traps

    The Lektratek crossflow grit extractor mechanism is ideal for the removal of grit from sewage entering the treatment works and has been designed on both the retention and constant velocity principle. Sewage entering the hopper-bottomed tank is kept at a constant velocity by rag free paddles rotating in the same direction. Prior to removal of sand, ...

    By Lektratek Water Technology based in PotchIndustria, SOUTH AFRICA.

  • Maldril - Pipeline Repair Sleeves

    Especially designed for steel transmission piping. Designed to completely enclose and permanently repair pit holes or splits in steel pipe up to 8 inches in length; or encase defective screw collars and butt-welded joints. Sleeves will assemble over deflected pipe as much as 5 degrees. Capscrew design provides added circumferential sealing ...

    By Maldril Consulting based in Benoni, SOUTH AFRICA.

  • Premium

    Horizon - Grooved-End Fittings (Piping Connection)

    100psi (7bar) up to 1200psi (81bar).

    By Horizon Water Co., Ltd. Distributor in Randburg, SOUTH AFRICA. from Grooved-End Fittings (Piping Connection) Product line

  • STRAINPRESS - Sludgecleaner

    The STRAINPRESS® is a horizontal pipe-shaped coarse material separator which consists of inlet and driving zone, screening and press zone and finally a discharge section with a conical pressure regulating device. The coarse material is separated continuously under pressure and periodical cleaning of the screening zone by backwashing is not ...

    By Huber SE Office in George, SOUTH AFRICA. from Sludgecleaner Product line

  • ROMOLD - Model Type ATV - Pressure Pipe End Chamber

    Pressure pipe end chamber ND 1000 - according to ATV A 157 made of polyethylene (PE) in accordance with DIN EN 13598-2 and DIN EN 476, made of 100% virgin material with no recycled parts, homogeneous, and without foaming agents, anti-lift design, solid-walled finished parts with exterior ribs, chamber rings and eccentric cone with integrated, ...

    By ROMOLD GmbH Distributor in SOUTH AFRICA. from Pressure Pipe End Chamber Product line

  • ROMOLD - Model Type ROMOLD - Pressure Pipe End Chamber

    PE-Pressure pipe end chamber DN 625, 100% virgin material without recycling content (ultimate elongation respectively elongation at tear ≥ 200 %), round bottom chamber, tangential inlet on the chamber wall and centric outlet on the round bottom, horizontal reinforcement rings to secure uplift retention, Triple-Safety-Seal according to EN 681-1 ...

    By ROMOLD GmbH Distributor in SOUTH AFRICA. from Pressure Pipe End Chamber Product line

  • FLOWMETRIX - Model SAFSONIC P - Portable Ultrasonic Time Of Flight Meter

    Wide flow measurement range0,01m/s to 32m/s Bi-directional flow measurement Flow totaliser – positive, negative and net Pipe size range from DN15 to DN6000 Rechargeable battery with 10hour batterylife. Easy to use menu structure Non-invasive No moving parts No pressure loss Hygienic flow measurement Easy and economical to install Measurement is ...

    By Flowmetrix SA based in Durban, SOUTH AFRICA.

  • FLUXUS - Model G601 - Portable Flow Measurement Meter

    The FLUXUS G601 portable gas flow meter measures the flow of virtually any gas using FLEXIM's proven transit-time correlation technique. The ultrasonic transducers are simply clamped onto the outside of the pipe, thus no cutting into the pipe or process interruption is required for installation. The FLUXUS G601 portable ...

    By Flexim GmbH Office in Eckbolsheim, SOUTH AFRICA. from Portable Flow Measurement Meter Product line

  • Premium

    Flowfit - Model CYA251 - Universal Flow Assembly for Nitrate/SAC, Turbidity and Oxygen Sensors

    Flowfit CYA251 is a flow assembly for nitrate/SAC, turbidity and oxygen sensors with a diameter of 40mm. It allows optimum adaption to your piping system thanks to numerous available process connections. The ruggedized material withstands even aggressive media and harsh environmental conditions and a back-pressure valve protects your ...

  • Flowmetrix - Model DFS2 - DFS2 Ultrasonic clamp on Doppler Flow meter

    • Single non-invasive clamp-on sensor• Pipe sizes DN25 to DN3000• 10 LED Bar graph flow indicator • Single Form C Relay, SPDT• 0 - 2m/s (0 - 6ft/s) or 0 - 6m/s (0 -18ft/s)• Adjustable start-up timer for pump operation• Adjustable delay timer for relay • Selectable latching of relay• Low cost, Quick to install, Easy to use• No sensor fouling, Zero ...

    By Flowmetrix SA based in Durban, SOUTH AFRICA.

  • Dorr-Oliver ODS - Air-Operated Diaphragm Pumps

    Its sturdy construction guarantees it will pump sludges and scum that no other unit can handle and will efficiently transfer anything that moves through a pipe. There is no unit like it. You can refer to an easy to follow Pump Selection Guide to properly size and specify the right ODS Pump for a given application in the available brochure. The ODS ...

    By FLSmidth Office in Constantia Kloof, Roodepoort, SOUTH AFRICA. from Air-Operated Diaphragm Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you