pressure pipe system equipment in California

  • Premium

    Proco - Model Series 300 - Flanged Rubber Pipe Connectors

    Each Proco Series 300 Flanged Rubber Pipe Connector is specifically engineered for your particular application. Multiple plies of tough fabric and helical spring steel wire are embedded into the pipe wall during the manufacturing process, resulting in a product precisely designed for your pressure and vacuum requirements.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Flanged Rubber Pipe Connectors Product line

  • Premium

    Proco ProFlex™ - Model Style 750 - Jacketed In-Line Flanged Rubber Check Valve

    The Proco ProFlex Style 750 jacketed flanged rubber check valves are designed with a full metal enclosure, for easy installation within existing piping systems.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Jacketed In-Line Flanged Rubber Check Valve Product line

  • Certa-Lok - Model C900/RJ - PVC Pressure Pipe

    North American Pipe Corporation’s C900/RJ Certa-Lok PVC Pressure Pipe is manufactured to meet the standards of today’s municipal needs for water and wastewater pressure applications. This unique coupled, restrained joint system is jobsite proven for decades and designed for trenchless applications with robust tensile strength for ...

    By North American Pipe Corporation Office in Lodi, CALIFORNIA (USA). from PVC Pressure Pipe Product line

  • Model AWWA C900/IB - PVC Pressure Pipe

    North American Pipe Corporation’s AWWA C900 Gasketed Integral Bell PVC Pipe product line is manufactured to meet the needs of modern municipal water, wastewater, and reclaimed water systems.  With top quality raw materials and modern processing technology, our C900 pipe meets all industry standards in addition to our own rigorous ...

    By North American Pipe Corporation Office in Lodi, CALIFORNIA (USA). from PVC Pressure Pipe Product line

  • Nu Flow - Epoxy Coating System

    Nu Flow has patented its pull-in-place structural lining process along with its epoxy coating system. The easiest way to determine which process is used for a particular project or scope would be by breaking the piping systems into two categories, pressurized and non-pressurized piping systems.

    By Nu Flow Corporate based in San Diego, CALIFORNIA (USA).

  • PLC - Dual Phase Extraction Systems

    Product Level Control manufactures a variety of dual phase extraction (DPE) systems; custom-equipped for optimal on-site performance. By offering flexible system designs and a wide range of available product parts and accessories, we meet your individual project goals for the best possible value. We size and match model type according to your air ...

    By Product Level Control Inc. (PLC) Office in Sacramento, CALIFORNIA (USA). from Dual Phase Extraction Systems Product line

  • Nu Line - Pressurized Epoxy Coating

    The epoxy coating process is an economical and efficient alternative to traditional pipe system replacement. Our technology restores aged, corroded piping systems and copper pipes that have pinhole leaks.

    By Nu Flow Corporate based in San Diego, CALIFORNIA (USA).

  • PVC Pipe

    PVC is the most commonly used plastic material for manufacturing plastic pipe. It has a relatively high tensile strength and modulus of elasticity and, therefore, is stronger and more rigid than most other thermoplastics. Joining methods are by solvent cementing, threading (Schedule 80 only) or flanging. PVC has been used successfully in such ...

    By Harrington Industrial Plastics based in Chino, CALIFORNIA (USA). from PVC Pipe Product line

  • CPVC Pipe

    CPVC has similar, but generally better, chemical resistance and physical properties than PVC. Joining methods are by solvent cementing, threading (Schedule 80 only) or flanging. CPVC has been used successfully for process piping, for hot corrosive liquids, and in hot and cold water distribution. Pressure ratings given are for solvent cemented ...

    By Harrington Industrial Plastics based in Chino, CALIFORNIA (USA). from CPVC Pipe Product line

  • Ultra Blue - Model PVCO C909 & F1483 - Molecularly Oriented Pipe

    Ultra Blue PVCO is a molecularly oriented pipe. Ultra Blue combines innovative engineering design and years of experience in PVC pipe manufacturing. The result is a higher performance, lighter weight, more cost effective pressure pipe for potable water and force main systems.

    By JM Eagle based in Los Angeles, CALIFORNIA (USA). from Molecularly Oriented Pipe Product line

  • Nu- Drain - Non-Pressurized Epoxy Lining (CIPP)

    The (CIPP) cured in-place pipe restoration process is an economical and efficient alternative to traditional pipe system replacement. Our CIPP lining technology allows us to restore and Re-Nu aged, corroded piping systems to a “better than new” condition without removing them. The epoxy liner installed to the pipes’ interior ...

    By Nu Flow Corporate based in San Diego, CALIFORNIA (USA).

  • U-S-Pipe - Model NXT Series - Ductile Iron Pipe

    NXT is U.S. Pipe's next generation 'push on' type pipe.  The advanced design utilizes a lip type seal gasket cross section which allows for lower insertion forces and greater joint deflection when compared to similar push on joint designs.  Features incorporated into the joint also allow the gasket to resist being unseated or rolled ...

    By U.S. Pipe. - a subsidiary of Mueller Water Products, Inc. Office in Olivehurst, CALIFORNIA (USA). from Ductile Iron Pipe Product line

  • Clear PVC Pipe

    PVC clear Schedule 40 or Schedule 80 piping provides optimum clarity for critical visual monitoring of processes fluids. Joined using standard solvent cement welding with clear cement, clear systems provide the many benefits of regular PVC, such as excellent corrosion resistance, smooth interior walls, non-contaminating, non-conductive, light ...

    By Harrington Industrial Plastics based in Chino, CALIFORNIA (USA). from Clear PVC Pipe Product line

  • Model 247/D - High Pressure Manual Drip Trap

    Condensate removal from gas piping systems is necessary to protect piping and equipment from possible damage caused by corrosion or water hammer. In addition, water lying in low spots in piping can restrict gas flow resulting in increased pressure drop within the system. In addition to all low spots, Varec Biogas drip traps should be installed ...

    By Varec Biogas based in Huntington Beach, CALIFORNIA (USA). from High Pressure Manual Drip Trap Product line

  • Big Blue - Model C905 - Large-Diameter Pipe

    JM Eagle Big Blue 905 large-diameter pipe is the safe, long-lasting and stable solution for a modern infrastructure. PVC C.I.O.D. Transmission Pipe DR 51/DR 41/DR 32.5/DR 25/DR21/DR18 Pressure Rated 80, 100. 125, 165, 200 and 235 psi Ring-Tite Joints 14' - 48'. For Use In Transmission, Municipal Water Systems and Other Services. JM Eagle’s ...

    By JM Eagle based in Los Angeles, CALIFORNIA (USA). from Large-Diameter Pipe Product line

  • Large Diameter PVC Pipe

    Maximum recommended fluid velocity is 5' per second, Manufacturer's pressure ratings must be strictly followed; many fabricated fittings do not carry the same pressure rating as pipe, Other sizes and configurations available up to 30' diameter, Reduced pressure-rated fittings are available in most configurations, All PVC Schedule 80 pipe shall be ...

    By Harrington Industrial Plastics based in Chino, CALIFORNIA (USA). from Large Diameter PVC Pipe Product line

  • Restrained Joint Pipe and Fittings

    Restrained joint pipe and fittings afford a positive locking system that prevents joint separation. They may be of a bolted type or beltless. They may also be either flexible or rigid in their design. Each manufacturer of pipe provides at least one proprietary method of joint restraint when necessary due to internal working pressure or soil ...

    By Custom Pipe & Coupling Inc. based in Stanton, CALIFORNIA (USA). from Restrained Joint Pipe and Fittings Product line

  • Straub - Model PLAST-PRO - Axial Restraint Pipe Coupling

    An axially restrained jointing system allowing a quick and simple installation of pressure pipes made of polyethylene (PE). The complete kit is available for PE pipes in dimension SDR 11 (63.0 - 180.0 mm, PN16) and SDR 17 (125.0 - 355.0 mm, PN10). STRAUB-PLAST-PRO is particularly suitable for water, waste water, industrial plants and maintenance ...

    By Straub Werke AG Office in National City, CALIFORNIA (USA). from Axial Restraint Pipe Coupling Product line

  • Model D-015 - Combination Air Valve for High Pressure

    The Combination Air Valve for high pressure has the features of both an air release valve and an air & vacuum valve. The air release component is designed to automatically release small pockets of air to the atmosphere as they accumulate along a pipeline or piping system when it is full and operating under pressure. The air & vacuum ...

    By A.R.I. Flow Control Accessories Office in San Diego, CALIFORNIA (USA). from Combination Air Valve for High Pressure Product line

  • Model D-014, D-016 - Combination Air Valve For High Pressures

    The D-014, D-016 combination air valves for high pressure have the features of both an air release valve and an air & vacuum valve. The air release component is designed to automatically release small pockets of air to the atmosphere as they accumulate along a pipeline or piping system when it is full and operating under pressure. The air ...

    By A.R.I. Flow Control Accessories Office in San Diego, CALIFORNIA (USA). from Combination Air Valve For High Pressures Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you