pressure pipe system equipment in Michigan

  • IPEX BlueBrute - Pipe Systems

    Designed for municipal applications, Blue Brute systems deliver superior strength with corrosion resistant performance and the ability to flex without damage. IPEX municipal pressure piping systems are made with a high-strength, high-impact PVC compound, allowing them to perform even under high traffic loads and deep burial conditions.

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Pipe Systems Product line

  • IPR - Cured-In-Place-Pipe For Pressure Pipe

    IPR'S pressure pipe CIPP system features RS Technik technology and specially formulated Dow epoxy resins. IPR continues to expand the nation's largest and most comprehensive trenchless portfolio by adding RS Technik's pressure CIPP rehabilitation system. This proprietary design for renewing pressure pipe with cured-in-place pipe has evolved from ...

    By Inland Pipe Rehabilitation (IPR) Office in Detroit, MICHIGAN (USA). from Cured-In-Place-Pipe For Pressure Pipe Product line

  • IPEX Corzan - Model CPVC - High Pressure (HP) System

    The new IPEX Corzan High Pressure (HP) CPVC System has been specially developed with greater pressure and high temperature capabilities compared to other thermoplastic piping systems. In addition, IPEX Corzan HP has a 25% higher pressure rating than the equivalent sized generic CPVC at 180°F. Available in schedule 80 ½” to ...

    By IPEX Office in New Baltimore, MICHIGAN (USA). from High Pressure (HP) System Product line

  • IPEX Clear-Guard - Fail-Safe, Fully Pressure Rated Clear Containment System

    Clear-Guard's fail-safe, fully pressure rated clear containment system allows for easy detection of leaks and eliminates the risks associated with piping aggressive chemicals overhead.

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Fail-Safe, Fully Pressure Rated Clear Containment System Product line

  • IPEX - Brute and Fusible Series PVC Pipes

    IPEX has introduced new Fusible Brute and Fusible Series PVC pipes. By combining the mechanical properties of PVC with an innovative, patented butt fusion process, IPEX provides the only available method of installing a continuous, monolithic, fully restrained PVC pipe system. Capable of being used in a variety of trenchless or conventional direct ...

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Brute and Fusible Series PVC Pipes Product line

  • IPEX TerraBrute - Model CR - Engineered For Horizontal Directional Drilling (HDD)

    4' - 12' (100mm - 300mm). Engineered for Horizontal Directional Drilling (HDD) and other trenchless applications, TerraBrute CR is a 100% non-metallic, AWWA C900 PVC pressure pipe system. Non-corroding and installation friendly, TerraBrute CR allows you to standardize on PVC throughout your potable water and sewer infrastructure. Whether ...

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Engineered For Horizontal Directional Drilling (HDD) Product line

  • Model 830-RV-005 - Diaphragm Relief Valves

    This self-contained, spring loaded diaphragm pressure relief valve is self-operated and requires no air pressure or other outside power source to function. Available in sizes 1/2' through 8' in a wide variety of body materials, linings and diaphragms and with pressure relief settings from 10 to 150 psig. Ideal for applications such as the ...

    By Century Instrument Company based in Livonia, MICHIGAN (USA). from Diaphragm Relief Valves Product line

  • Model 300 PSI - Alarm Check Valves

    The Globe Model H-2 High Pressure Alarm Check Valves are used in wet pipe fire sprinkler systems. They primarily serve a dual purpose in that they prevent a reverse flow of water through their bodies (non-return) and also provide for the use of a hydraulic fire alarm which is not dependent upon an electrical power supply for its operation. Through ...

    By Globe Fire Sprinkler Corporation based in Standish, MICHIGAN (USA). from Alarm Check Valves Product line

  • IPEX - Butterfly Valves

    These highly versatile valves can be used for simple on/off service but also for processes requiring precise throttling. End-of-line installation of the lugged version allows for downstream piping disassembly with the upstream system still under pressure. The extensive size range and material availability make them applicable in a wide range of ...

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Butterfly Valves Product line

  • Model 175 PSI - Alarm Check Valves

    The Globe Model H-1, H-2 and H-3 Alarm Check Valves are used in wet pipe fire sprinkler systems. They primarily serve a dual purpose in that they prevent a reverse flow of water through their bodies (non-return) and also provide for the use of a hydraulic fire alarm which is not dependent upon an electrical power supply for its operation. Through ...

    By Globe Fire Sprinkler Corporation based in Standish, MICHIGAN (USA). from Alarm Check Valves Product line

  • IPEX - Check & Vent Valves

    Check valves should be used whenever there is a need to prevent back-flow of process media. This may be when two incompatible fluids cannot be allowed to mix, or when reverse flow would cause undesirable drainage of a system line or tank. Many styles exist including: simple ball checks, heavy duty swing checks, and highly efficient piston checks. ...

    By IPEX Office in New Baltimore, MICHIGAN (USA). from Check & Vent Valves Product line

  • Model SFL650...2350 - Quick Suctioning Immersion Pumps

    Quick Suctioning Immersion Pumps series SFL equipped with the patented 'BRINKMANN's Suction De-aeration System' are excellently suited to pumping extremely inflated fluids (emulsions) with heavy chip loads as they occur in heavy cutting when turning, milling or grinding.The quick suctioning immersion pumps reach stable working conditions as soon ...

    By K.H. Brinkmann Pumps GmbH & Co. KG Office in Wixom, MICHIGAN (USA). from Quick Suctioning Immersion Pumps Product line

  • Base Mounted Pressure Booster Stations

    Base Mounted Pump Stations are pre-engineered units with an extensive selection of pumps, motors, controls, piping and accessories. Gorman-Rupp has many standard designs for new installations, or we can custom design for existing installations with minimum hook-up time. Base Mounted Pump Stations are available with a variety of pumps to match ...

    By Gorman-Rupp Co. Distributor in MICHIGAN (USA). from Base Mounted Pressure Booster Stations Product line

  • 7x10 Above Ground Pressure Booster Stations

    Gorman-Rupp’s 7' x 10' (2.1 m x 3.1 m) Above Ground Pressure Booster Station is a complete system, ready for immediate installation and hookup to power and piping. The low silhouette and color of the Quonset-type fiberglass enclosure blends in with surrounding landscaping. The fiberglass enclosure resists corrosion, mildew, fungus and mold. ...

    By Gorman-Rupp Co. Distributor in MICHIGAN (USA). from 7x10 Above Ground Pressure Booster Stations Product line

  • Pulsation Dampener

    Absorbs pressure pulsations in piping. Reduces high liquid accelerations and inertial forces in suction and in discharge line. Avoids excessive pressure loss and damaging water hammer. Protects chemical feed system and metering pump from damage.

    By Lutz-JESCO America Corp. Distributor in MICHIGAN (USA). from Pulsation Dampener Product line

  • Cusco - Model Liquid Ring Series - Truck

    We have engineered this unit to provide our customers with an alternative to rotary lobe and vane style vacuum systems, where the application is unsuited. This system is ideally suited for the pickup and removal of liquids, slurries, sludge and dry aggregate type materials. It comes equipped with an 1,100 CFM liquid ring vacuum pump that generates ...

    By Cusco Fabricators, Inc. Distributor in Northville, MICHIGAN (USA). from Truck Product line

  • Cusco - Hydrovac Trucks

    This powerhouse is designed to work with heavy applications that typical vane type vacuum pump systems cannot handle. The Hydrovac series supports a low maintenance tri-lobe positive displacement blower with airflow ratings of 980 CFM to 1,400 CFM and vacuum levels up to 28″ Hg, a reversible airflow piping system for pressure off-loading, ...

    By Cusco Fabricators, Inc. Distributor in Northville, MICHIGAN (USA). from Hydrovac Trucks Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you