pressure pipe system equipment in Virginia

  • Air, Gas & Water Piping Systems

    UAPC offers a variety of custom field services, including compressed air or gas system installation, maintenance, repair, overhaul or reconfiguration. Long term maintenance agreements are offered based upon single or multiple plant locations. In addition, piping system design and installation, certified welding service, air system audits, leak ...

    By Universal Air & Gas Products Corporation based in Norfolk, VIRGINIA (USA). from Air, Gas & Water Piping Systems Product line

  • U-S-Pipe - Model NXT Series - Ductile Iron Pipe

    NXT is U.S. Pipe's next generation 'push on' type pipe.  The advanced design utilizes a lip type seal gasket cross section which allows for lower insertion forces and greater joint deflection when compared to similar push on joint designs.  Features incorporated into the joint also allow the gasket to resist being unseated or rolled ...

    By U.S. Pipe. - a subsidiary of Mueller Water Products, Inc. Office in Remington, VIRGINIA (USA). from Ductile Iron Pipe Product line

  • Full Closeable Collector System

    This is our ultimate in spill containment for railroad tank car top loading or unloading under pressure operations. This model comes with a center pan that is positioned between the rails and two side pans immediately outboard of the rails. When in the open position with the side pan flaps extended, this model will protect an area 11 ft. 3-6 ...

    By Trans Environmental Systems, Inc. (TESI) based in Charlottesville, VIRGINIA (USA).

  • NIBCO - Model 200 PSI, PFFP600 - Brass Ball Valves

    The NIBCO Press System brass ball valve features press-to-connect end connections with an inboard bead and EPDM O-rings for quick and easy joinery to the piping system. Simply applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux.

    By NIBCO Inc. Office in Stuarts Draft, VIRGINIA (USA). from Brass Ball Valves Product line

  • IPEX BlueBrute - Pipe Systems

    Designed for municipal applications, Blue Brute systems deliver superior strength with corrosion resistant performance and the ability to flex without damage. IPEX municipal pressure piping systems are made with a high-strength, high-impact PVC compound, allowing them to perform even under high traffic loads and deep burial conditions.

    By IPEX Distributor in VIRGINIA (USA). from Pipe Systems Product line

  • IPEX Corzan - Model CPVC - High Pressure (HP) System

    The new IPEX Corzan High Pressure (HP) CPVC System has been specially developed with greater pressure and high temperature capabilities compared to other thermoplastic piping systems. In addition, IPEX Corzan HP has a 25% higher pressure rating than the equivalent sized generic CPVC at 180°F. Available in schedule 80 ½” to ...

    By IPEX Distributor in VIRGINIA (USA). from High Pressure (HP) System Product line

  • Model 247/D - High Pressure Manual Drip Trap

    Condensate removal from gas piping systems is necessary to protect piping and equipment from possible damage caused by corrosion or water hammer. In addition, water lying in low spots in piping can restrict gas flow resulting in increased pressure drop within the system. In addition to all low spots, Varec Biogas drip traps should be installed ...

    By Varec Biogas Distributor in Alexandria, VIRGINIA (USA). from High Pressure Manual Drip Trap Product line

  • IPEX Clear-Guard - Fail-Safe, Fully Pressure Rated Clear Containment System

    Clear-Guard's fail-safe, fully pressure rated clear containment system allows for easy detection of leaks and eliminates the risks associated with piping aggressive chemicals overhead.

    By IPEX Distributor in VIRGINIA (USA). from Fail-Safe, Fully Pressure Rated Clear Containment System Product line

  • IPEX - Brute and Fusible Series PVC Pipes

    IPEX has introduced new Fusible Brute and Fusible Series PVC pipes. By combining the mechanical properties of PVC with an innovative, patented butt fusion process, IPEX provides the only available method of installing a continuous, monolithic, fully restrained PVC pipe system. Capable of being used in a variety of trenchless or conventional direct ...

    By IPEX Distributor in VIRGINIA (USA). from Brute and Fusible Series PVC Pipes Product line

  • IPEX TerraBrute - Model CR - Engineered For Horizontal Directional Drilling (HDD)

    4' - 12' (100mm - 300mm). Engineered for Horizontal Directional Drilling (HDD) and other trenchless applications, TerraBrute CR is a 100% non-metallic, AWWA C900 PVC pressure pipe system. Non-corroding and installation friendly, TerraBrute CR allows you to standardize on PVC throughout your potable water and sewer infrastructure. Whether ...

    By IPEX Distributor in VIRGINIA (USA). from Engineered For Horizontal Directional Drilling (HDD) Product line

  • Landia - Model Type AXD-I/AXP-I - Recirculation Pump

    Axial pumps designed to pump large volumes of fluid with low back pressure. The pump is mostly used in wastewater treatment plants for the recirculation of sludge, but may also be used in e.g. drainage, and for recirculating in fish farming facilities. The AXP-I/AXP-I is typically mounted directly onto the outside of a tank wall, but it can also ...

    By Landia a/s Distributor in VIRGINIA (USA). from Recirculation Pump Product line

  • IPEX - Butterfly Valves

    These highly versatile valves can be used for simple on/off service but also for processes requiring precise throttling. End-of-line installation of the lugged version allows for downstream piping disassembly with the upstream system still under pressure. The extensive size range and material availability make them applicable in a wide range of ...

    By IPEX Distributor in VIRGINIA (USA). from Butterfly Valves Product line

  • IPEX - Check & Vent Valves

    Check valves should be used whenever there is a need to prevent back-flow of process media. This may be when two incompatible fluids cannot be allowed to mix, or when reverse flow would cause undesirable drainage of a system line or tank. Many styles exist including: simple ball checks, heavy duty swing checks, and highly efficient piston checks. ...

    By IPEX Distributor in VIRGINIA (USA). from Check & Vent Valves Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you