Pressure Pipe System Equipment Near South Dakota
-
PremiumManufactured by Fluence Corporationbased in USA
Fluence has extensive experience in designing and manufacturing reverse osmosis (RO) systems, which are used in desalination and many other water purification processes. RO uses a cross-flow membrane separation process that can reject macromolecules and dissolved substances in a solvent, usually water. Substances retained in the ...
-
Manufactured by U.S. Pipe. - a subsidiary of Mueller Water Products, Inc.based in USA
TR FLEX Pipe and Fittings provide flexible restrained push-on joints for 4' through 36' Ductile Iron pipe and fittings. The TR FLEX Restrained Joint has a working pressure rating equivalent to the working pressure rating of the parent pipe, with a maximum restrained joint working pressure rating ...
-
Manufactured by Clean Energybased in USA
Our Single CNG/LNG Pump assembly is designed for integration with our standard LNG skid for simple installation and reliable pump priming. And it can easily expand to a dual CNG/LNG pump system in the ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
IPEX Centurion extends the corrosion-free benefits of Blue Brute® to larger diameters of pipe and new ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Engineered for Horizontal Directional Drilling (HDD) and other trenchless ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Bionax SR combines the same strength, toughness and flexibility as standard Bionax pipe with the enhanced seismic-resistance benefits of an extended ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Designed for municipal applications, Blue Brute systems deliver superior strength with corrosion resistant performance and the ability to flex without damage. IPEX municipal pressure piping systems are made with a high-strength, high-impact PVC compound, allowing them to perform even under high traffic loads and deep burial ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Bionax has almost double the strength of conventional PVC and three times the impact absorption ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Choosing the correct cement is a vital link in a thermoplastic piping system. Although cement is one of the most critical components of a piping system, it is most often overlooked. Cements are formulated to best meet specific needs – for example, general-purpose cement is thinner and less aggressive in bonding than ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Naco’s fabricated C900/905 fittings are designed as a robust and corrosion-resistant alternative to cast iron pressure piping systems. Naco’s fabricated PVC CIOD fittings have a dimensional ratio (DR18 or DR25) equal to or greater than that of the pipe from which they are fabricated. Our fabricated fittings shall be ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Blue Brute systems are immune to corrosion from aggressive soils and galvanic ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Naco’s fabricated C900/905 fittings are designed as a robust and corrosion-resistant alternative to cast iron pressure piping systems. Naco’s fabricated PVC CIOD fittings have a dimensional ratio (DR18 or DR25) equal to or greater than that of the pipe from which they are fabricated. Our fabricated fittings shall be ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
IPEX provides the only available method of installing a continuous, monolithic, fully restrained PVC pipe ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Cycle Tough is specifically designed for irrigation systems and sewer ...
-
Manufactured by Residential Sewage Treatment Companybased in USA
We custom manufacture pumping stations for any wastewater need. These include lifting effluent to an evaporation pond, pumping raw sewage with grinder pumps, dosing Low Pressure Pipe systems (LPP) and time dose pumping to drip irrigation ...
-
Manufactured by Aquatrol, Incbased in USA
Our 560 / 570 valve line is a high capacity safety valve used for boilers, piping lines and vessel protection. Designed and engineered for heavy-duty industrial use. ASME and National Board certified for Section I and VIII as well as CE and CRN Certifications. Use for ASME Section I applications to pressure ratings of 250 PSI. {V} and {NB} ...
-
Manufactured by Aquatrol, Incbased in USA
Multiple purpose safety valves for air / gas protection. Designed for durability, yet an economical choice for safety and relief applications.ASME and National Board certified for Section VIII as well as CRN Certifications. Choose for a variety of applications where mid-level capacity is ...
-
Manufactured by Aquatrol, Incbased in USA
Same as Series 560 except with Stainless Steel wetted trimming (Nozzle and ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs The Shand & Jurs Biogas 97101 High Pressure Manual Drip Trap provides for the continuous, safe removal of condensate from low points in pressure gas piping systems. Removing condensed liquid protects the piping and equipment from corrosion and 'water hammer' ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97110 Automatic Drip Trap provides for the continuous, safe removal of condensate from low points in low pressure gas piping systems. Removing condensed liquid protects the piping and equipment from corrosion and 'water hammer' ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you