pressure regulator equipment in Netherlands

  • Premium

    Sierra - Fuel Pressure Regulation Unit

    Each Fuel Pressure Regulation Unit is designed to allow a range of settable fuel delivery pressures to be achieved. The pressure setpoint inputted by the customer (either directly entered into CADET V14, or client host system) is controlled by an electro pneumatically actuated regulator valve and a pressure transducer to provide pressure feedback. ...

    By Sierra Instruments, Inc. Office in Egmond aan den Hoef, NETHERLANDS. from Fuel Pressure Regulation Unit Product line

  • INSTRUM - Pressure Regulators for Gases

    Stainless steel pressure regulators are used where operation and installation situation require high-grade materials. These requirements are different and depend on the application: corrosion-proof (e.g. sour gas), not sensitive to condensate, sulphur or salt containing atmospheres, best possible surface quality for food and pharmaceutical ...

    By Binder Group GmbH Office in ER RIJSWIJK, NETHERLANDS. from Pressure Regulators for Gases Product line

  • INSTRUM - Pressure Regulators for Liquids

    Stainless steel pressure regulators are used where operation and installation situation require high-grade materials. These requirements are different and depend on the application: corrosion-proof against acids and lye, different solvents and liquids, also for the use in demineralized water.

    By Binder Group GmbH Office in ER RIJSWIJK, NETHERLANDS. from Pressure Regulators for Liquids Product line

  • INSTRUM - Precision Pressure Regulators

    Precision pressure regulators are used above all, where varying supply pressures should be equalized. Using a diaphragm, pressure is measured and compared with the nominal value (can be adjusted via the spring or dome pressure).The seat of the valve is adjusted via resulting forces, continuously and automatically.

    By Binder Group GmbH Office in ER RIJSWIJK, NETHERLANDS. from Precision Pressure Regulators Product line

  • INSTRUM - Pressure Regulators for Corrosive Applications

    In some applications, even high-grade stainless steel material undergo non-acceptable corrosion because of the process chemicals used. In these cases, it is very important to use the right type of materials to achieve acceptable operation times and an efficient plant operation.

    By Binder Group GmbH Office in ER RIJSWIJK, NETHERLANDS. from Pressure Regulators for Corrosive Applications Product line

  • INSTRUM - Low Pressure Regulators and Relief Valves

    Inertization process normally are working closed to atmospheric pressure. Therefore typical large diaphragms are required in order to transfer relative low pressures to sufficiently large closing and opening forces for the valve seat.

    By Binder Group GmbH Office in ER RIJSWIJK, NETHERLANDS. from Low Pressure Regulators and Relief Valves Product line

  • Premium

    PowerPress - Belt Presses for Mechanical Dewatering

    The PowerPress is a robust and efficient, but nonetheless reasonably priced dewatering unit for a large number of sludge. Its long filtration zones and high pressures ensure optimum dryness levels, and the reduced polymer consumption and ease of maintenance induce significant cost savings

    By ANDRITZ Separation - ANDRITZ Group Office in Waddinxveen, NETHERLANDS. from Belt Presses for Mechanical Dewatering Product line

  • Model 400 Series - Regulators

    The 401  Series regulators are intended for primary pressure control of non-corrosive, high purity or liquefied gases, or for applications where minor fluctuations in outlet pressure due to diminishing inlet supply can be tolerated.

    By Concoa Office in Utrecht, NETHERLANDS. from Regulators Product line

  • Model 302 Series - Regulators

    The 302 Series regulators are intended for primary pressure control ol non-corrosive, high purity or liquefied gases or for applications where minor fluctuations in outlet pressure due to diminishing inlet supply can be tolerated.

    By Concoa Office in Utrecht, NETHERLANDS. from Regulators Product line

  • Model 402 Series - Regulators

    The 402 Series regulators are intended for primary pressure control of non-corrosive. high purity or liquefied gases, or for applications where  minor fluctuations in outlet pressure due to diminishing inlet supply can be tolerated.    

    By Concoa Office in Utrecht, NETHERLANDS. from Regulators Product line

  • PTC - Model MP&HP - Medium-High Pressure Water Jetting Units

    Plungers Pump; Triplex or 5-plex horizontal with plungers in special material. Gear reduction included (above 75kW). Lubrication: forced or splashing type. Accessories: Pressure regulator, safety valve CE norms, pressure gauge (glycerin oil filled).

    By PTC srl. - part of the Comet Group Office in Alblasserdam, NETHERLANDS. from Medium-High Pressure Water Jetting Units Product line

  • Model 50.015.050 - Piston Pumps

    Pump 15 ltr - 45 bar (P11 ). Output: 15 liters per minute. Pressure: max. 45 bar. Pump: 1420 rpm . Piston pumps are suitable for pumping clean water, possibly with easily soluble pesticides. Potential capacities to 500 bar. The pump is supplied with pressure regulating valve - adjustable over the whole pressure range, glycerine-filled pressure ...

    By Empas BV based in Veenendaal, NETHERLANDS. from Piston Pumps Product line

  • KOKS - Model ECOVAC RDR - Pressure/Vacuum Truck with Scrubber

    The KOKS EcoVac RDR pressure/vacuum truck with scrubber is designed for (heavy) industrial applications and is suitable for suctioning, discharging and transporting fluid and hazardous substances, such as liquids, sludge, fats, oils, fuels and chemicals. Specially developed for working with hazardous and contaminated substances, the truck is ...

    By KOKS Group bv based in Alkmaar, NETHERLANDS.

  • Premium

    I/P and E/P Controllers

    Rotork Instruments fast response, high flow, compact I/P, E/P, D/P and P/I electro-pneumatic converters have extensive combinations of inputs and outputs, carry standard FM, CSA, ATEX or IECEx agency approvals, and maintain accuracies of up to 0.15%. Fast response, high flow and high accuracy models feature proportional pressure regulation.

    By Rotork plc Office in Rotterdam, NETHERLANDS. from I/P and E/P Controllers Product line

  • Model 50.711.050 - Diaphragm Pumps

    Membr.Pump 110 Ltr. 50 Bar (IDB1100). Output: 110 liters per minute. Pressure: max. 50 bar. Pump: 550 RPM. Besides clean water, diaphragm pumps are also suitable for pumping surface water, somewhat coarser pesticides and calcium carbonate. Potential capacities to 45 bar. The pump is supplied with pressure regulating valve - adjustable over the ...

    By Empas BV based in Veenendaal, NETHERLANDS. from Diaphragm Pumps Product line

  • Model SP2000 - Regulated Heated / Non-Heated Gas Sample Probes

    Gas sample probe type SP2000, with external ceramic filter type S-2K150, filter porosity: 2µm, filter element seal and lid seal out of Viton. mounting flange: DN65PN6B with thread G3/4'i.ion material: SS316, Viton, ceramic.  Regulated Heated / Non-Heated Gas Sample Probes  with ceramic filter element outside, optional: other filter ...

  • MDE - Model 1000-1500-200 Lt - Trailed Mistblowers

    Galvanized frame. Integrated system cleaning tank. 15 lt. handwashing tank. Wheels with adjustable axle. Filter kit with anti-emptying valve. Pump with security valve. Remote controlled pressure regulator. Double antidrip nozzles. Fan with aluminium blades. Adjustable blades. Clutch. 2 speed multiplier. Inox tubes. Deflectors kit.

    By MDE Machinebouw BV based in JE Echteld, NETHERLANDS. from Trailed Mistblowers Product line

  • Model 4 - Semi-Continuous OC-EC Field Analyzer

    The Model-4 Semi-Continuous OC-EC Field Analyzer features the latest advances in electronic and optical technology, and is rack mountable! This rugged and compact instrument offers sensitive and reliable field operation with an optimized oven and detector design. Its access panel allows for easy filter service and calibration. New safety ...

    By Sunset Laboratory, Inc. Office in Amsterdam, NETHERLANDS.

  • Agrifac - Model GreenFlowPlus - Spraying System

    GreenFlowPlus is the unique and clever designed spraying system from Agrifac for an optimal spraying result. A compactly built pump set with the shortest possible circuit which results in a minimum presence of unused liquid in the fittings and it is extremely easy and quick to clean. In addition a circulation system is used so that the spray ...

    By Agrifac Machinery B.V. based in Steenwijk, NETHERLANDS. from Spraying System Product line

  • Rowafil - Model RO 460 - Reverse Osmosis Systems

    Reverse osmosis process is not an old technology, but what makes the difference from a plant to another, is the right pre-treatments knowledge, that warrant a good plant work, and insure long life to reverse osmosis modules, and to the others components of this kind of systems. We have taken care to choose best components and best technical ...

    By Rowafil Manufacturing BV based in Venray, NETHERLANDS. from Reverse Osmosis Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you