The PRU (Pressure Regulator Ultra) was designed to handle higher flows of 20 to 100 gpm (4543 - 22713 L/hr). Its 2-inch inlet and outlet size make it an ideal option for accurate zone and individual sprinkler pressure control. Its compact size fits in a valve box.
The Senninger PSR and PSR-2 are designed to handle flows from 0.5 to 15 gpm (114 to 3407 L/hr). The PSR is recommended for relatively clean water. The patented PSR-2 is designed for use with surface water.
The PRL (Pressure Regulator Low Flow) is ideal for installations requiring lower flows of 0.5 to 8.0 gpm (114 to 1817 L/hr). Suggested use in solid-set, drip, other low-volume irrigation systems, as well as center pivot and mechanical-move irrigation systems.
The PMR-MF (Pressure-Master Regulator Medium-Flow) is ideal for installations requiring mid-range flows of 2 to 20 gpm (454 to 4542 L/hr), including solid-set, drip and other low-volume irrigation systems.
Available with 1-1/2' NPT and 2' NPT connections. The 1803 is capable of handling inlet pressures up to 125 PSI and can offer outlet pressures ranging from 3.5' W.C. to 5 PSI. The maximum flow capacity in higher pressure situations is 20,000 SCFH depending on orfice size and inlet pressure. Note: The 1800 Series can be special ordered with Full ...
Cyclonaire’s convey line injectors operate at pressures up to 100 PSIG. Metered volumes are regulated by a patented needle-type flow adjustment valve complete with adjusting nut and rubber sealing boot. Installation is quick and simple, with little to no maintenance. Available in Nylon, Aluminum and Stainless Steel.
This unique worm drive design features an automatic built-in brake that will prevent the system from coasting. One hydraulic motor is utilized per tower. Oil is supplied to the motor by high pressure steel lines and fittings. A variable flow control valve regulates direction, speed and, when required, provides an optional safety for ...