pressure regulator equipment in Wisconsin

  • Model GC101 - Manual Controller

    Flushable Filter (GFF3/4 ) and Adjustable (5-30 PSI) Pressure Regulator (G250). Comes with two ¾' swivel adapters (G220).

    By Greenhill Manufacturing based in Greendale, WISCONSIN (USA). from Manual Controller Product line

  • Model PL 35 & PL 45 - PVC Pressure Tank

    All PVC outer shell. Corrosion proof construction. Load holding capacity 2,000 lbs. Maximum working pressure 100 psi. Butyl air cell for excellent air retention. Water passes through tank for complete water change. Designed for a constant pressure system: either vfd or regulating valve applications. Residential, farm and light industry.

    By In-Well Technologies, Inc. based in Lena, WISCONSIN (USA).

  • Premium

    I/P and E/P Controllers

    Rotork Instruments fast response, high flow, compact I/P, E/P, D/P and P/I electro-pneumatic converters have extensive combinations of inputs and outputs, carry standard FM, CSA, ATEX or IECEx agency approvals, and maintain accuracies of up to 0.15%. Fast response, high flow and high accuracy models feature proportional pressure regulation.

    By Rotork plc Office in Milwaukee, WISCONSIN (USA). from I/P and E/P Controllers Product line

  • Hawkpower - Gaseous Fueled Generators

    Ultra durable Lister-Petter water-cooled gaseous fueled engines, 4-stroke, spark ignition, with standard equipment: Autostart Ready, 12V electric start and 45 Amp battery, charging alternator. Radiator, blower fan and guards. Dry type paper element air cleaner. Engine mounted residential grade exhaust silencer. Key start control panel with hour ...

    By Charles Equipment Co. Office in Waukesha, WISCONSIN (USA).

  • CNG BOOST Hydraulic Compressor

    Broadwind-SAFE CNG BOOST Hydraulic compressors can operate with a wide range of suction pressure without any regulator.  When the compressor is used as a booster, the system always supplies compressed gas at the right pressure, assuring the highest refueling pressure throughout the vehicle refueling cycle, maximizing the use of storage volume ...

    By Broadwind Energy, Inc. Office in Manitowoc, WISCONSIN (USA). from CNG BOOST Hydraulic Compressor Product line

  • Model DA1 - Pressure Reducing Regulator

    The Model DA1 is a high performance, spring operated, fl ow-to-open pressure reducing regulator with internal pressure balancing piston-cylinder that provides high flow capacity and high pressure drop capability. Internal trim design allows the same basic unit to cover a broad range of pressure settings. Performance approaches ...

    By Cashco Inc Distributor in Kimberly, WISCONSIN (USA). from Pressure Reducing Regulator Product line

  • Spiromatic - Model 90U - Self Contained Breathing Apparatus

    SPIROMATIC 90U is an entry level breathing apparatus (SCBA) for fire fighting, excellent for industrial and maritime environments. Spiromatic 90U is built upon the proven and reliable S-facemask/breathing valve and plug-in regulator, delivering Interspiro performance at a competitive price. The facemasks positive pressure eliminates inward leakage ...

    By Interspiro, Inc. based in Pleasant Prairie, WISCONSIN (USA). from Self Contained Breathing Apparatus Product line

  • Spiromatic - Model 90USA - Self Contained Breathing Apparatus

    SPIROMATIC 90USA is a simple but effective breathing apparatus (SCBA) for industrial and maritime environments. Spiromatic 90USA is built upon proven and reliable components, with decades of solid performance and reliability. The Spiromatic facemask, breathing valve and regulator deliver real performance at a competitive price. The facemask ...

    By Interspiro, Inc. based in Pleasant Prairie, WISCONSIN (USA). from Self Contained Breathing Apparatus Product line

  • Model P1 - Single Stage Pressure Reducing Regulator

    The Model P1 is designed for gases and liquids with inlet pressures up to 3600 psig (248 Barg). Standard adjustable outlet ranges from 1-10 psig (.07-.69 Barg) thru 10-750 psig (.69-51.7 Barg). Flow coefficient of 0.02, 0.06, and 0.20 avail able. This ver sa tile point of use reg u la tor can be ordered with a variety of op tions to meet your sys ...

    By Cashco Inc Distributor in Kimberly, WISCONSIN (USA). from Single Stage Pressure Reducing Regulator Product line

  • Premium

    Hilliard - Pneumatic Overload Release Clutch

    The Hilliard Pneumatic Overload Release Clutch provides adjustable, on-the-fly overload protection by using air pressure to regulate torque. Air pressure puts force on the balls placed inside the pockets in the clutch, and provides the means for torque transmission. By adjusting the air pressure, the overload torque can be increased or decreased ...

    By Hilliard Corporation Distributor in Germantown, WISCONSIN (USA). from Pneumatic Overload Release Clutch Product line

  • Model 5300P - Air Filter Regulator

    The Model 5300P is a 316L SST self-contained pressure reducing air regulator designed for gaseous service including sour gas and other corrosive gases. The unit is capable of controlling outlet pressure between 0-150 psig (.0-10.0 Barg) with a maximum inlet pressure of 290 psig (20 Barg).

    By Cashco Inc Distributor in Kimberly, WISCONSIN (USA). from Air Filter Regulator Product line

  • Model 1000 HP - Differential Reducing Regulators

    Models 1000HP-1+6 or 1000HP-1+8 are differential reducing regulators used to maintain a relatively constant pressure differential between the fluid loading pressure and the valve’s outlet pressure. Model 1000HP-1+6 is a single-diaphragm differential design. Model 1000HP-1+8 is a double-diaphragm differential design. Both available in sizes ...

    By Cashco Inc Distributor in Kimberly, WISCONSIN (USA). from Differential Reducing Regulators Product line

  • Model 987 - Positive Differential Reducing Regulators

    The Model DA2 is a differential reducing regulator used to maintain a constant pressure differential between a fluid loading pressure (PLOAD) piped to the spring chamber and the regulator's outlet pressure (P2). In the Model DA2 the P2 pressure is higher than the PLOAD (Positive Bias). The amount of bias or differential ...

    By Cashco Inc Distributor in Kimberly, WISCONSIN (USA). from Positive Differential Reducing Regulators Product line

  • Model DA2 - Positive Differential Reducing Regulators

    The Model DA2 is a differential reducing regulator used to maintain a constant pressure differential between a fluid loading pressure (PLOAD) piped to the spring chamber and the regulator's outlet pressure (P2). In the Model DA2 the P2 pressure is higher than the PLOAD (Positive Bias). The amount of bias or differential ...

    By Cashco Inc Distributor in Kimberly, WISCONSIN (USA). from Positive Differential Reducing Regulators Product line

  • Automatic Double Diaphragm Pumping System

    QED’s Quick-response Pumping Systems are easy to deploy, safe, reliable, and can handle challenging applications. The self-contained system includes a premium Graco air-operated double diaphragm pump, fluid level sensor, air flow control, air filtration bank, pressure regulator, and a bottom loading foot valve intake assembly.

    By QED Environmental Systems, Inc Distributor in Verona, WISCONSIN (USA). from Automatic Double Diaphragm Pumping System Product line

  • QED AutoPump - Air-Powered Data Module

    In-Well Fluid Level Reading, Pulse Counter and Air Pressure information at the wellhead. The QED AutoPump Data Module is a water-resistant enclosure that protects and shields surface instrumentation from weather and/or harsh site conditions while providing easy access, via a see-through window, to key system instrumentation readings. The AutoPump ...

    By QED Environmental Systems, Inc Distributor in Verona, WISCONSIN (USA). from Air-Powered Data Module Product line

  • QED Union - Orifice Plate Wellhead

    QED’s Union Orifice Plate Wellhead is available for both 2” and 3” pipes. The 2' wellhead is constructed of glass-filled polypropylene and the 3' in sturdy Schedule 80 PVC. QED’s Orifice Plates are constructed of 1/16” stainless steel. Using the most appropriate orifice plate size with minimal pressure drop is ...

    By QED Environmental Systems, Inc Distributor in Verona, WISCONSIN (USA). from Orifice Plate Wellhead Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you