Pressure Switch Equipment Near Maryland
-
Manufactured by Sulzer Ltd.based in SWITZERLAND
A synthetic prefabricated sump, the Synconta 901B and 902B is a single or double pumping station for the automatic pumping of wastewater and sewage from locations and areas below the backwash level in accordance with EN ...
-
Manufactured by Pulsafeeder, Inc. - A unit of IDEX Corporationbased in USA
The MicroVision Controller series features is innovative Toroidal sensor technology. Toroidal sensors are not susceptible to fouling and eliminate the need for routine cleaning and calibration. The MicroVision controller comes standard with selectable timer, Dry contact/ Hall Effect water meter input, dual biocide with pre-bleed, lockout, inhibitor interface, and four programmable start times per ...
-
Manufactured by Pulsafeeder, Inc. - A unit of IDEX Corporationbased in USA
The MicroTrac is a microprocessor based feed and bleed toroidal conductivity controller designed to control conductivity and feed inhibitor in cooling tower systems. Featuring innovative toroidal sensor technology, the MicroTrac provides an economical control platform that is not susceptible to sensor fouling and never requires calibration! The MicroTrac conductivity controller has a 0 - 9,999 ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
-
Manufactured by Filtronics, Incorporatedbased in USA
When you mention reverse osmosis (RO), Filtronics is the first name to come to mind. Our E-series RO machines (Figure 1) are designed for durable operation, high quality product water production, easy installation and straightforward ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The InnovaSwitch insertion-type level switch is a high-performance, industrial-grade liquid level indicator for tanks and process vessels. This product switches on level changes as small as 0.03 inch (0.8 mm) on dry-to-wet and wet-to-dry occurrences in a tank or vessel. The instrument was designed for heavy industrial environments, including ...
-
Manufactured by Process Wastewater Technologies LLCbased in USA
The Raked Bar Screen is an efficient, reliable and cost-effective screening system for large combined sewer overflows (CSOs). It incorporates a horizontal fixed stainless steel bar-rack and a TIVAR* screen comb. The bars are continually raked by the hydraulically driven comb assembly. Maintenance of the Raked Bar Screen is minimal, and can be performed from the top/clean water side of the screen. ...
-
Manufactured by Croplandsbased in AUSTRALIA
The Pinto 3000 represents Croplands philosophy - Robust design and generous dimensions result in unmatched ...
-
Manufactured by Mueller Water Productsbased in CANADA
The SPC pump control panel provides the interface between the pump motor starter and the Singer pump control valve. The SPC ensures that the pump starts and stops without causing line ...
-
Manufactured by Hydromatic Pumpbased in USA
Specifically designed to meet the demands of septic tank effluent applications that require a "high-head" dual seal ...
-
Manufactured by Mueller Water Productsbased in CANADA
The SAP surge anticipator panel provides the interface between a customer supplied, system pressure switch and the Singer surge anticipating control valve. Together they provide protection against destructive pressure surges. The SAP panel energizes the control valve pilot solenoid on an abnormally low pressure reading and/or ...
-
Manufactured by Electrocorpbased in CANADA
of gaseous pollutants. The easy to use air purification system comes with particle pre-filters to prevent clogging as well as a pressure switch that tells you when the filters are saturated. ...
-
Manufactured by Atlas Copco ABbased in SWEDEN
The LFx compact oil-free piston industrial compressor range offers small-capacity piston compressors for reliable and oil-free solutions. Ideal for your low air ...
-
Manufactured by Blue Ribbon Corp.based in USA
All Gauges through 4 ½” Dial Size. Pressure Transducers and Transmitters. Most Pressure Switches or other small to medium displacement instruments. 30 PSI Through 2500 ...
-
Manufactured by Benzaco Scientific, Inc.based in USA
ODOR ARMOR formulations are diluted with water and then pressurized to 1000 psi to create a fine atomization at each nozzle. When the odor control solution is released, the ultra fine atomized odor control droplets collide with nuisance odor compounds where a series of chemical reactions occur that neutralize the nuisance odor before it ...
-
Manufactured by OTT HydroMet - Veraltobased in GERMANY
The OTT C31 Universal Current Meter is designed for flow velocity measurements in combination with hand-held wading rods or cable suspended from a bridge or boat. Different accessories like sounding weights (middle pieces), sounding reels (winches), cable ways etc. allow the setup of a complete flow monitoring station. OTT C31 Universal current meters mean thousandfold proven quality, precision ...
-
Manufactured by OTT HydroMet - Veraltobased in GERMANY
The OTT C2 small current meter for discharge measurements for shallow waters in small rivers, channels, laboratories and river models. Proven a thousand times to measure reliably flow velocities from 0.025 up to 5 m/s. Available for rod measurements on 9 mm or 20 mm rod. ...
-
Manufactured by Contegra Inc.based in USA
Contegra's CA-A100 is typically used to control the operation of a single pump in response to level fluctuations in a storage tank. The CA-A100 is designed to dampen pressure surges. thus, the CA-A100 can be located near the pump rather than near the tank. The CA-A100 accepts a 0-10 VDC input which is typically produced by a 4-20 mADC ...
-
Manufactured by Griffin Filters LLCbased in USA
Griffin’s answer to high temperature FILTER applications, the Nova series can withstand tempures up to 1650°F — more than 1000°F over the conventional temperature limit of dust collectors. With several unique features incorporated into its design, the Nova series minimizes thermal stress while protecting the jet pulse from extreme heat. Its high temperature threshold makes the ...
-
Manufactured by Griffin Filters LLCbased in USA
Easy to install, operate, and maintain, Griffin's Jet-Vent dust collectors are an efficient, economical solution for dust and product recovery. These pulse jet filter vents provide continuous fabric filtration for extended periods. Available in a wide-range of sizes, the Jet-Vent is one of Griffin's most versatile dust collectors. Like all of our dust collection systems, these units are built to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you