process gas analyzer equipment in Pennsylvania

  • Premium

    AMETEK PI - Model ta3000 - Gas Analyzers

    AMETEK PI - Model ta3000 - Gas AnalyzersTrace Level Gas Monitoring For Bulk Gas, Environmental and Research Laboratory Applications. The Trace Analytical ta3000 series, manufactured by AMETEK Process Instruments, is a family of instruments designed to monitor trace levels of specific impurities in bulk gases, environmental applications and ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Gas Analyzers Product line

  • Premium

    AMETEK PI - Model TDLAS 5100 HD - Gas Analyzer

    The Model 5100 HD hosts a dual laser platform. Two separate lasers are installed in the instrument, sharing a common optical path through the sample, enabling the measurement of two analytes simultaneously. This results in significant cost savings to our customers. Where the required concentrations of the analytes differ considerably such that ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Gas Analyzer Product line

  • Premium

    AMETEK PI - Model TDLAS 5100 - Gas Analyzer

    The Model 5100 hosts a single laser platform to measure a single gas analyte. The Model 5100 can measure any one of the following gas analytes: water vapor, methane, hydrogen sulfide, carbon dioxide, and oxygen in process or flue gas. If water vapor is the measured gas analyte, methane can be monitored additionally at percent levels using the same ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Gas Analyzer Product line

  • Premium

    AMETEK PI - Model ta5000 - Gas Analyzers

    Trace Level Gas Monitoring For Bulk Gas, Environmental and Research Laboratory Applications. The presence of trace impurities in gas supplies and ambient air are of significant concern for bulk gas producers, semiconductor manufacturers, plant environmental safety personnel, and research scientists. The presence of impurities can lower product ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Gas Analyzers Product line

  • Premium

    AMETEK PI - Model 5000 - Process Moisture Analyzer

    The versatile AMETEK Model 5000 is a highly sensitive moisture analyzer for process applications where the continuous, reliable measurement of moisture in vapors and gases is required. The Model 5000 analyzer measures moisture on-line by monitoring the vibrational frequency change of a hygroscopically sensitized quartz crystal that is exposed ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Process Moisture Analyzer Product line

  • Premium

    Dycor - Model LC-D Series - Residual Gas Analyzer

    The Dycor LC-D Series Residual Gas Analyzer (RGA) offers outstanding performance, yet is priced to be the most cost-effective RGA on the market. The LC-D Series instruments are constructed from materials that are compatible with Ultra High Vacuum (UHV) systems and are designed to require the very minimum in maintenance. This versatile RGA is ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Residual Gas Analyzer Product line

  • HALO - Model 3 - Gas Analyzers

    The HALO 3 H2O analyzer provides users with the unmatched accuracy, reliability, speed of response and ease of operation that users of Tiger Optics analyzers know and expect. Featuring Tiger Optics’ powerful Cavity Ring-Down Spectroscopy-based moisture sensor in a very compact and economic analyzer design, this versatile analyzer allows ...

    By Tiger Optics, LLC based in Warrington, PENNSYLVANIA (USA). from Gas Analyzers Product line

  • Premium

    Model 934 - Sensor Specific Gas Analyzer

    The Model 934 is a rugged, analyzer adapted from the Model 931/932 UV analyzer platform for measurement of Hydrogen in Tail Gas Treating Units (TGTU) where the UV (H2S) is not required. The Model 934 analyzer system has a heated cell to avoid and hydrocarbon or water condensation.  A fully integrated AMETEK Process Instruments sample system ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Sensor Specific Gas Analyzer Product line

  • Model Mini ICS - Process Oxygen Analyzer

    By continuously measuring oxygen, the Mini ICS provides increased safety margins in process manufacturing environments. It helps reduce inert gas consumption and VOC emissions by allowing manufacturers to use inert gas only as needed to maintain safe oxygen levels.The Mini ICS can be used as a stand-alone instrument or as the analysis component in ...

    By Neutronics, Inc based in Exton, PENNSYLVANIA (USA). from Process Oxygen Analyzer Product line

  • Model MAX300-IG - Industrial Gas Analyzer

    The MAX300-IG Industrial Gas Analyzer is Extrel’s seventh generation of high performance, online Process Mass Spectrometers. The MAX300-IG provides real time gas analysis and is suitable for a variety of industrial applications including: Ammonia, Ethylene, Ethylene Oxide, Ambient Air Monitoring, Steel Basic Oxygen Process (BOP), Steel ...

    By Extrel CMS, LLC. based in Pittsburgh, PENNSYLVANIA (USA). from Industrial Gas Analyzer Product line

  • Model MAX300-IGX ATEX - Industrial Gas Analyzer

    The MAX300-IGX ATEX Industrial Gas Analyzer is the ATEX approved version of Extrel's high performance Industrial Gas Analyzer. The MAX300-IGX system is suitable for use in ATEX Zone 1 Group II B + H2, T3 or T4 area classifications. This analyzer performs high speed process analysis using the most advanced core mass spectrometer technology ...

    By Extrel CMS, LLC. based in Pittsburgh, PENNSYLVANIA (USA). from Industrial Gas Analyzer Product line

  • Premium

    AMETEK PI - Model 900 - Tail Gas-Air Demand Analyzer

    In the past, conventional Claus Sulfur recovery processes were adequately controlled on the basis of ratio or excess process air.  The development of new and modified sulfur recovery processes has dramatically changed the analytical requirements placed on the tail gas analyzer.  These applications require accurate chemical concentration ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Tail Gas-Air Demand Analyzer Product line

  • Premium

    THERMOX - Model WDG-IV UOP/RP - Oxygen Analyzer for UOP CCR Platforming Process

    The Model WDG UOP/RP was designed in conjunction with UOP Continuous Catalyst Regeneration process requirements for meeting the purpose of low level oxygen measurement during the regeneration cycle in which coke deposits are removed from the catalyst by oxidation. THE Model WDG UOP/RP Analyzer has a specially treated Zirconium Oxide cell which ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Oxygen Analyzer for UOP CCR Platforming Process Product line

  • Premium

    E-Instruments - Model BTU 4500 - Hand-Held Commercial and Industrial Gas Analyzer

    00The BTU-4500 is a NEW hand-held commercial and industrial gas analyzer that is a valuable tool designed for emissions monitoring and maintenance and tuning of combustion processes including boilers, burners, gas and diesel engines, turbines, furnaces, kilns, heaters, and laboratory analysis.

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA). from Hand-Held Commercial and Industrial Gas Analyzer Product line

  • Model OA-1S+ - High Purity Gas Analyzers

    The Neutronics Model OA-1S+ is the industry benchmark for portable parts per billion Oxygen Analyzers for ultra-pure applications. The OA-1S+ is the only oxygen analyzer that can effectively measure from percent to parts-per-billion levels of oxygen, with very quick response. Designed specifically for the demanding needs of the semiconductor ...

    By Neutronics, Inc based in Exton, PENNSYLVANIA (USA). from High Purity Gas Analyzers Product line

  • Model OA-1 - High Purity Gas Analyzers

    Neutronics Model OA-1 is the industry benchmark for transportable oxygen analyzers for ultra-pure gas applications. Capable of analyzing PPM levels of oxygen in inert gases, the OA-1 delivers rapid response with high reliability to 1PPM O2. The compact, lightweight design allows the OA-1 to meet spot check, QA/QC, and process control applications. ...

    By Neutronics, Inc based in Exton, PENNSYLVANIA (USA). from High Purity Gas Analyzers Product line

  • THERMOX - Model CMFA-P2000 - Portable Premix Gas/Flue Gas Analyzer

    Combustion gas measurements for NOx efficiency and product quality are especially challenging in the glass container manufacturing process. Two types of gas-fired furnaces exist that require post and pre combustion gas analysis. The glass furnace or 'melt-tank' is fired by conventional burners that mix pre-heated air and fuel in the burner nozzle. ...

    By AMETEK based in Berwyn, PENNSYLVANIA (USA). from Portable Premix Gas/Flue Gas Analyzer Product line

  • Premium

    AMETEK PI - Model 2850 - Moisture Analyzer

    AMETEK’s Model 2850 Moisture Analyzer establishes a new standard in clean gas moisture analyzers: ultrafast response speed, exceptional accuracy, virtually no interferences, multigas compatibility, and on-board measurement verification. This unique combination of capabilities makes the Model 2850 the moisture analyzer of choice for ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Moisture Analyzer Product line

  • Premium

    AMETEK PI - Model 5830 - Moisture Analyzer

    Building upon the success of our quartz-crystal moisture measurement technology, AMETEK’s Model 5830 is an easy-to-use process moisture analyzer that offers a truly remarkable combination of performance features: exceptional accuracy, multi-gas compatibility, fast response speed, and wide measurement range.

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Moisture Analyzer Product line

  • Premium

    AMETEK PI - Model 5800 - Moisture Analyzer

    Critical moisture measurement applications include high purity gas production; olefin manufacture, storage, and transmission; semiconductor gases; and industrial gas production and quality assurance. For these applications and more, turn to AMETEK Process Instruments’ Model 5800 Moisture Analyzer. The Model 5800 offers a truly remarkable ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Moisture Analyzer Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you