Process Wastewater Treatment Equipment In Mexico
-
PremiumManufactured by Fluence Corporationbased in USA
the Zephyr induced-air flotation system in pulp and paper mills, petrochemical applications, food processing, and in municipal wastewater ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
Flottweg C series decanters around the world process 25 million liters of sewage sludge per hour. The dewatering and thickening of sewage sludge plays a decisive role in the wastewater treatment process. Requirements for the quality and efficiency of sewage treatment plants increase year after year, not least ...
-
Manufactured by H2O Innovationbased in CANADA
The Bio-Brane membrane bioreactor (MBR) is an advanced water treatment producing high quality effluent that surpasses the most strigent regulations. The Bio-Brane MBR combines the low power consumption of the Bio-Wheel patented technology with a highly efficient submerged membrane process. This wastewater treatment exceeds the ...
-
Manufactured by Clean Water Technology, Inc.based in USA
Coarse Solids Screens are designed for removal of coarse solids for municipal or industrial wastewater treatment plants. Coarse solids screens are widely used in the wastewater pretreatment and industrial wastewater treatment ...
-
Manufactured by Clean Water Technology, Inc.based in USA
The Membrane Bioreactor is a unique and compact wastewater treatment process that combines a single sludge aerobic biological treatment process with an integrated, immersed membrane system. This process is ideally suited in a wide range of municipal and industrial wastewater ...
-
Manufactured by Clean Water Technology, Inc.based in USA
An MBBR contains thousands of polyethylene biofilm carriers operating in mixed motion within an aerated wastewater treatment process. Every biofilm carrier adds productivity via the provision of an active surface area sustaining bacteria within protected cells. It is this high-density population of bacteria that achieves high-rate ...
-
PremiumManufactured by Fluence Corporationbased in USA
This surface aerator provides high-oxygen transfer rates for the most challenging and heavily loaded industrial and municipal applications. Long-lasting performance, and the highest oxygen-transfer rates of any mechanical aeration system on the market. The TWISTER low-speed aerator is designed for long-term, continuous operation. Twister optimizes the spray of water droplets, resulting in some of ...
-
PremiumManufactured by Fluence Corporationbased in USA
A diamond-shaped, open-ended design maximizes bubble-shearing action and offers a simple approach to solving clogging issues. CYCLONE coarse bubble diffusers are easy to install, require no scheduled maintenance, and are perfect for any coarse bubble system. The Cyclone is a proven performer. It’s easy to install and needs no scheduled maintenance, which makes it perfect for any coarse ...
-
PremiumManufactured by Fluence Corporationbased in USA
sludge processes to lagoons and oxidation ditch applications, TORNADO® subsurface aerators deliver excellent oxygen transfer and high mixing efficiency to a wide range of wastewater treatment processes in any climate. This unique product mixes and aerates all or part of a ...
-
Manufactured by Dürr Systems, Inc.based in USA
Blower silencers are required in many applications such as industrial processing and waste water treatment. With a resume that includes hundreds of thousands of blower silencers sold to date, Dürr Universal is an industry expert in blower silencing needs. ...
-
Manufactured by CST Industries Incbased in USA
Our extruded panel cover design is available in clear spans up to 18 feet (4.57m) and custom designed to meet your project's specific functional and design loading requirements. All aluminum design constructed of 6061-T6 and 6063-T6 aluminum structural members and 6063-T6 sheets ensures quality, durability and longevity. Extruded flat panel covers are easily installed and removed. The lifting ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme UniSet, with its microprocessor-based system, features a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of a variety of toxic and combustible gases. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Graduated measuring ranges 0.2 – 2,000 mg/l, special measuring ranges up to 100,000 mg/l Hydrogen peroxide measurement with DULCOTEST sensors: Efficient and reliable determination of the concentration of hydrogen peroxide - can be used in a wide range of ...
-
based in NETHERLANDS
Application: Anaerobic waste water treatment is applied in many industrial areas for waste water purification of water containing large amounts of organics (COD > 2.000 ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The compact orifice plate with OPTIBAR DP transmitter is an economic DP flowmeter for a broad range of applications – from demi-water to chemicals to steam. The integral orifice plate is a one-piece design per ISO 5167-2 or ASME MFC-3M, consisting of a compact orifice plate, a sandwich meter body, impulse lines and a connection flange. KROHNE offers the complete DP flow solution with ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens sensor for drinking water and process applications. Chloromax CCS142D is the digital free chlorine sensor for all kinds of water. It measures reliably even if fluctuations in flow or conductivity occur and enables control of the disinfection loop so that the water is free of germs. The sensor offers low maintenance saving you time. ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Colorimetric system for drinking water and wastewater monitoring and optimization of process control. Liquiline System CA80AL offers precise, regulation-compliant online measurement of aluminum residues in drinking water and wastewater. The analyzer helps you to optimize aluminum dosing in flocculation processes and phosphate ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Effective solutions for industrial ventilation systems, protecting workers and the environment from contaminated ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
CCS120 is the analog sensor for standard measurement of total chlorine. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you