Process Wastewater Treatment Equipment Near Kenya
-
Manufactured by Spire Metering Technology, LLC.based in USA
is completely portable and relies on clamp-on sensors to effectively perform non-invasive flow and thermal energy measurements. This yields major advantages, such as no pipeline disturbance, no pressure loss, and most importantly no process ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Your Technical Partner in Moving Bed Biofilm Reactor (MBBR) Wastewater Treatment. Reliable, affordable biological wastewater treatment technology for water utilities and industries throughout the US and around the world. What is the GWT Mbio MBBR wastewater treatment process? The ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Optimized Industrial Wastewater Reuse Solutions. Reusing industrial wastewater means applying stringent treatment methods to handle problematic pollutants in the wastewater stream, which vary by industry. These treatment processes can take up a lot of space and time. With GWT, decrease your ...
-
Manufactured by Mena Water FZCbased in UNITED ARAB EMIRATES
The membrane bioreactor (MBR) is a wastewater treatment process combining membrane filtration with biological treatment.This innovative technology offers several advantages compared with the conventionally activated sludge process. Among these advantages are higher biomass concentration, eliminating the needs of secondary ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
CCS120 is the analog sensor for standard measurement of total chlorine. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Colorimetric system for drinking water and wastewater monitoring and optimization of process control. Liquiline System CA80AL offers precise, regulation-compliant online measurement of aluminum residues in drinking water and wastewater. The analyzer helps you to optimize aluminum dosing in flocculation processes and phosphate ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens sensor for drinking water and process applications. Chloromax CCS142D is the digital free chlorine sensor for all kinds of water. It measures reliably even if fluctuations in flow or conductivity occur and enables control of the disinfection loop so that the water is free of germs. The sensor offers low maintenance saving you time. ...
-
Manufactured by Industrie De Nora S.p.A. | De Nora Water Technologiesbased in ITALY
TETRA Amphidrome process for wastewater treatment is especially designed for biofiltration with the simultaneous removal of BOD, ammonia, suspended solids and nitrate-nitrogen. The system is a fixed film sequencing batch biological filter. The performance of the deep bed Amphidrome is guaranteed to produce an effluent which meets or ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme UniSet, with its microprocessor-based system, features a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of a variety of toxic and combustible gases. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
Manufactured by Dewaco Ltd.based in FINLAND
DEWA A-P automatic polymer preparation systems are an important part of the effective and reliable wastewater treatment process. It is applicable for both municipal and industrial applications. The batch preparation technology guarantees the best possible concentration formation. All of the DEWA polymer preparation A-P units are designed for a ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The compact orifice plate with OPTIBAR DP transmitter is an economic DP flowmeter for a broad range of applications – from demi-water to chemicals to steam. The integral orifice plate is a one-piece design per ISO 5167-2 or ASME MFC-3M, consisting of a compact orifice plate, a sandwich meter body, impulse lines and a connection flange. KROHNE offers the complete DP flow solution with ...
-
Distributed by TIA – Technologies for Industrial-Wastewater Treatment GmbHbased in GERMANY
TIA generally provides all process steps employed in wastewater technology today. Selected steps will be combined to offer the ideal overall solution for any kind of wastewater problem or process water problem in industry or municipality. The modular way of construction proofs of value for treatment plants for ...
-
Manufactured by Harmsco, Inc.based in USA
This product is designed with a patented Up-flow technology which prevents the accumulation of air inside the filter housing keeping the filter operating at ...
-
by IETOSbased in EGYPT
IETOS engineers’ study each case intensively to provide the most sustainable and cost-effective treatment method. ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
Tethys Process Optical DO Probe is based on proven Luminescent Optical Technology suitable for most industrial application. It provides full featured performance, replaceable sensor caps, and long life. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible installations of DO probe. Optical DO ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
Tethys General Purpose pH Sensor with ¾”NPT thread on both front & back is a heavy-duty pH probe with Ryton body suitable for many industrial water application. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible installations of pH Sensor. This pH sensor offers excellent chemical and impact ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
Tethys Process Optical DO Probe is based on proven Fluorescence Optical Technology suitable for most industrial application. It is rugged, without replacement sensor cap and having auto-cleaning feature. It is designed for submersible mounting in open basin. Optical DO probe is suitable for measurement of dissolved oxygen measurement in ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
Tethys General Purpose ORP Sensor with ¾”NPT thread on both front & back is a heavy-duty ORP probe with Ryton body suitable for many industrial water applications. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible installations of ORP Sensor. This ORP sensor offers excellent chemical and impact ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you