process water Equipment available in Burundi

Available in Burundi| Near Burundi
6349 Results found

We couldn't find any process water equipment in Burundi

Here is a list of results available in Burundi

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: process water ×

  • Available in: Africa ×

  • Available in: Burundi ×

EasyClean - Model 100 - Automated Flushing of Sensors

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

EasyClean100 has been developed to clean sensors installed in immersion housings. A specially designed spray head directs a jet of compressed air or flushing water at the sensing end of the sensor. The assembly configuration ensures that the sensor is effectively cleaned under water. Through the cavitation effect induced by air bubbles impacting ...

EasyClean - Model 150 - Automated Flushing of Sensors

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

EasyClean150 is the most cost-effective unit for the automated flushing of sensors installed in a pneumatically operated retractable housing. The system controls the movement of the housing as well as monitoring the flushing function for the sensor. EasyClean150 is suitable for applications in which the use of water as a cleaning medium is ...


Tethys Instruments - Model UV300 - Online Water Analyser

by Tethys Instruments SAS     based in Meylan - Inovallee, FRANCE

The UV300 is a cost effective water analyser for applications focused on one or two parameters. Mainly based on UV spectroscopy, well known for its stability and low operating cost, the UV300 can measure parameters like organic matter, nitrate, colour, aromatics hydrocarbons (PAH). Complementary modules allows the measurement of PO4, Cl2, NO2, Fe, ...

pH Probes for Pure Water Applications

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO Thornton’s range of pH probes and pH meters has been designed to provide the highest accuracy and reliability in pH measurement for pure water treatment applications. Thornton also offers pH probes that can provide a simultaneous ORP measurement. A wide variety of housings are available to match almost all installation ...

Model M800 - Multi-Parameter Transmitter

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The M800 multi-parameter transmitter provides simultaneous monitoring of one, two, or four in-line sensors for measurement of pH/ORP, optical DO, amperometric oxygen (DO as well as O2 gas), conductivity, resistivity, dissolved ozone, flow, and turbidity, in pure water as well as process applications.

AdEdge - General Water Filtration Systems

by Adedge Water Technologies, LLC     based in Buford, GEORGIA (US) (USA)

Filtration is a physical method of removing suspended solids from a solution. In water treatment applications, these solids may range from dirt, plant material, and debris washed into the water supply during heavy run-off to bacteria, viruses, and other microscopic particles that occur naturally. These particles can damage pumps and valves, ...

Model M700 - Modular Transmitter

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The M700 is a flexible instrument for continuous measurements in the field of liquid analysis. The M700X is intended for operation in locations subject to explosion hazards which require equipment of ATEX Group II, device category 2(1), gas/dust. Thanks to its modular design, the M700 can easily be adapted to a wide range of measurement tasks. ...

HORIBA - Model HD-200 - Four-Wire Analyzer

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

Self-diagnosis of membrane damage and infiltration into the probe. On-site membrane replacement as well as whole sensor replacement. Span calibration by air preceded by auto-zeroing (Electrical auto zeroing function). Extensive interfaces (2-channel transmission output, RS-485 compatible, 4-relay output).

HORIBA - Model HC-200F - Four-Wire Analyzer

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

Suitable for fluoride ion monitoring in effluent from factories, e.g., those of semiconductor FPD and glass manufacturers. 0 to 10,000 mg/L wide measuring range (10-range switching).

HORIBA - Model ES-51 - Portable Conductivity/Resistivity/Salinity Meter

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

This conductivity meter measures conductivity, resistivity and salt in water solutions. It is a field type, with a waterproof case, and is easy to hold and move. It enables anyone to conduct high-precision measurement, anytime and anywhere. Naturally it can be used by specialists at research institutions, but it can be also be used in wide range ...

HORIBA - Model OM-51 - Portable Dissolved Oxygen Meter

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

This field-type dissolved oxygen meter measures dissolved oxygen concentration (DO), oxygen concentration (O2), saturation (SAT.RATIO) and temperature of water solutions. It uses a laboratory sensor to enable BOD measurement. Waterproof construction enables use at virtually any measurement site. This meter is being used in research institutions, ...

HORIBA - Model FES-310L - Sanitary Conductivity Sensor (Flow Through Type)

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

Since this flow-through type sensor has no internal protuberances, fluid flows through the sensor with exactly the same inside diameter as the pipe, thus helping reduce fluid retention and ensuring that CIP chemical fluid is drained completely, which results in higher cleaning performance. The FES-310L Series sanitary conductivity sensors, which ...

HORIBA - Model ESH-01-C-SN - Sanitary Conductivity Sensor for Low Concentrations

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The ESH-01-C-SN conductivity sensor, which is used in conjunction with the HE-960CW conductivity converter, is ideal for controlling conductivity in the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals.

HORIBA - Model HE-960CW - 2-Channel Sanitary Conductivity Meter

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The HE-960CW is ideal for the conductivity control of the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals. And we have developed a lineup of electric conductivity sensors that can be used in conjunction, from the conventional insertion type to the flow-through type with improved ...

HORIBA - Model F-50 Series - Benchtop Multi-parameter Water Quality Meters

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

Years of HORIBA sensor technology development have reached their culmination in the form of a 46-mm diameter sensor probe: a compact monitoring solution offering high pressure tolerance, long-term continuous measurement capability and highly accurate, simultaneous analysis of 13 parameters.

HORIBA - Model OCMA-25 - Automatic Oil Content Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

Over the past several decades, HORIBA has designed and manufactured a complete line of high-quality non-dispersing infrared analyzers and analyzer systems. HORIBA has extended infrared gas analyzer technology to the continuous measurement of oil in water for process monitoring and waste water alarm applications. The OCMA oil content analyzers are ...

HORIBA - Model TW-100 - Water Distribution Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

HORIBA’s TW-100 is a process water quality measurement system designed for drinking water and water distribution plants. The TW-100 monitors turbidity, color, free chlorine and pressure. This chemical free method reduces operating costs as it requires minimal maintenance and improves process control.

HORIBA - Model HE-300C - Two-Wire Transmitter

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

Suitable for continuous measurement of pure water or boiler water. Flexible temperature compensation.

HORIBA - Model HE-300R - Two-Wire Transmitter

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

Accurate measurement of UPW resistivity. Well-examined temperature compensation function for UPW. Arbitrary setting of the compensation target temperature.   

Horiba - Model TPNA-500 - Automatic Total Nitrogen/Phosphorus Monitoring System

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

More than 10 years have passed since the 5th Water Use Regulation was enforced in 2001. From the perspective on preservation of ambient water quality, it has become a matter of course for companies to be compliant with regulations and observe corporate compliance.

Need help finding the right suppliers?

Let the XPRTs do the work for you