process water flow equipment in Poland

  • Premium

    Sludge Drying Process System

    Economic, compact and safe The ANDRITZ Paddle dryer can be used for dewatering sludge (of various types) in waste water treatment plants. Many wastewater treatment plants are coping with a waste stream of digested sludge. The sludge is normally dewatered by means of a centrifuge or belt filter press. After dewatering the sludge has a typical dry ...

    By ANDRITZ Separation - ANDRITZ Group Office in Warszawa, POLAND. from Sludge Drying Process System Product line

  • HydroThane - Model WSP - Water Desulphurization Process System

    HydroThane WSP (Water deSulphurization Process) removes H2S from the biogas by utilizing the available activated sludge from the aerobic treatment stage. The activated sludge will wash the biogas in counter flow, absorbing the H2S from the gas phase (H2S-rich) into the water phase.

    By HydroThane STP BV Office in Warsaw, POLAND. from Water Desulphurization Process System Product line

  • Premium

    Promag - Model W 400 - Electromagnetic Flow Measuring System

    Sensor with EN ISO 12944 corrosion protection and state-of-the-art transmitter for Water&Wastewater. As a specialist with corrosion protection, Promag W is suitable for every application in the water and wastewater industry as well as for custody transfer. It is the ideal solution for direct underground installation or permanent underwater ...

    By Endress Hauser AG Office in Wroclaw, POLAND. from Electromagnetic Flow Measuring System Product line

  • Cross Flow Scrubbers

    Complex and not exactly defined waste air (e.g. from waste treatment or food processing) normally cannot be cleaned sufficiently through simple scrubbing. The reason for this is the different solubility of the waste air components. Some compounds easily dissolve in neutral water whilst others, e.g. sulphides, prefer alkaline pH. Amines, in turn, ...

    By Tholander Environmental Engineering Office in Jasienica, POLAND.

  • OxyWAP - Water Aeration System

    OxyWAP water aeration uses the mass exchange process, which takes place in two-phase (water-air) injector. The process uses the energy of the water stream, which is feeded under pressure to the injector. The atmospheric air is sucked by a water stream flowing through the injector. The mass exchange process (oxygen, carbon dioxide, hydrogen ...

    By AWP Nordic Products AB Office in Łódź, POLAND.

  • Premium

    Verderflex - Model Dura 35 - Industrial Peristaltic Hose Pump and Tube Pump

    The Verderflex Dura 35 is a compact, high pressure medium flow hose pump with superior. secondary containment. Designed for dosing, metering, sampling, high lift or medium head. applications in brewing, chemical processing, industrial plants, water treatment and effluent. and waste water processing.

  • Model Types EF & EFG - Pressure Filters

    Flow rate: Up to 25 m³/h per module. Pore density: From 1 µ. Ideal for filtration jobs with heavy demands on flow rates and space. Used for filtration of boiler water and cooling water, circulation water in district heating plants, rinse water in the surface treatment industry and in the electronics industry, as well ...

    By Silhorko-Eurowater A/S Office in Izabelin, POLAND. from Pressure Filters Product line

  • Premium

    Chloromax - Model CCS142D - Digital Disinfection Sensor

    Memosens sensor for drinking water and process applications. Chloromax CCS142D is the digital free chlorine sensor for all kinds of water. It measures reliably even if fluctuations in flow or conductivity occur and enables control of the disinfection loop so that the water is free of germs. The sensor offers low maintenance saving you time. Thanks ...

    By Endress Hauser AG Office in Wroclaw, POLAND. from Digital Disinfection Sensor Product line

  • Cooling Towers

    Water deficit, economic reasons and natural environment protection regulations encourage enterprises to use the water in a more economical manner and reduce its waste. Water savings in technological processes can be attained by building closed cycles, where the same water is repeatedly reused. Using closed cycles is both significantly more ecology ...

    By CEMET Ltd. sp. z o.o. based in Gdańsk, POLAND.

  • Model SK - Calibration Table

    Calibration table consists of a frame, undercarriage, calibrator fastening parts , cooling water and vacuum systems. The frame is a welded construction. Chassis consists of a wheel, running tracks and drive. The calibrator mounting set is a grate with a water tray. The part being in direct contact with water are made of stainless steel. The ...

    By Gamart S.A. based in POLAND. from Calibration Table Product line

  • Recuperative Oxidisers

    Recuperative oxidisers are targeted at industrial process where there is a combination of energy demand and effluent oxidation. These types of thermal oxidisers are mainly suitable for high VOC concentrations and lower flow rates. The process plant includes: An inverter driven effluent transfer fan, A pre-heater for the VOC or odour laden air, The ...

    By BABCOCK WANSON - CNIM Group Office in Gliwice, POLAND. from Recuperative Oxidisers Product line

  • Grease Separators

    In the case of grease separators, organic oils are separated through the use of gravitational separation as well as a flotation process. Due to the fact that the density of grease particles is lower than the density of water, they accumulate on its surface. Specially shaped deflectors, located within the tank of the separator (at the inlet and ...

    By Ecol-Unicon based in Gdańsk, POLAND. from Grease Separators Product line

  • Premium

    Kurita - Model NT - Innovative Biofouling Control Technology

    Biofouling is a major problem for the efficient operation of an open cooling water system. Slime produced by bacteria can very quickly form strong stable biofilm on heat exchanger, pipework and tower fill surfaces with really undesired consequences: Fast development - can be within days. Decrease heat transfer - 1µm of biofilm = 5 ...

    By Kurita Office in Katowice, POLAND. from Innovative Biofouling Control Technology Product line

  • Model Type AR - Submersible Mixers With Gear Drive

    Equipped with reducer mixers of type AR are used to provoke a circulation of waste water in tanks, channel, oxidation ditches of different size and shape at considerably vast distance. Medium or slow propeller speed enables homogenization of the sewage and prevents from sedimentation. Together with mixing and keeping water in flow mixers speed up ...

    By ASPAMET based in Mazańcowice, POLAND.

  • Model WCrr - Sludge Heat Exchangers

    Type WCrr heat exchangers are used to heat sewage sludge, process suspended solids and other media with dry matter less than 8%.We offer heat exchangers with housing, one or multi-sectional. Sludge recuperators are produced with autonomous heating systems and external heat transfer water loops. Heat exchanging pipelines are insulated with 5 to ...

    By SiGa-Tech Sp. z o.o. Sp. K. based in Iwanowice, POLAND. from Sludge Heat Exchangers Product line

  • Premium

    Lumex Instruments - Model AL-2 - Aluminium analyzer

    Aluminum in water on-line analyzer AL-2 provides continuous automatic control of aluminum content in aqueous media. The analyzer implements automatic control of water flows in water treatment systems and technological processes. Aluminium analyzer AL-2 ensures high sensitivity and rapid analysis, low consumption of the reagent used, and can work ...

    By Lumex Instruments Group Distributor in Warszawa, POLAND.

  • Premium

    Lumex Instruments - Model AE-2 - Petroleum hydrocarbons analyzer

    AE-2 analyzer is designed for continuous automatic monitoring of content of petroleum hydrocarbons in potable, natural, and waste water. The instrument comprises a sample preparation unit and a luminescence detector. The sample preparation unit provides metered water feed and switching of the water and reagent flows, control of temperature, mixing ...

    By Lumex Instruments Group Distributor in Warszawa, POLAND.

  • Premium

    Bello Zon - Model CDVc - Chlorine Dioxide System

    1 – 2,000 g/h chlorine dioxide. Max. flow at 0.2 ppm ClO2 metering is 10,000 m3/h. Chlorine dioxide system for monitoring and metering chlorine dioxide and diluted chemicals. Maximum output and safety due to special reactor concept. Bello Zon CDVc can be easily and safely integrated into any water treatment process.

    By ProMinent Group - ProMinent GmbH Distributor in Mirkow k/Wroclawia, POLAND. from Chlorine Dioxide System Product line

  • Hydrovision AquaProfiler®MT Horizontal ADCP

    Category: Discharge Measurement:-High-performance, optimised measurement system for stationary flow measurement in flowing waters consisting of measurement transducer type MT and 2D AquaProfiler® doppler sensor-Wireless programming and configuration via WLAN and browser (smartphone, tablet, laptop) with the 'Setup' software-Vertically and/or ...

    By SEBA Hydrometrie GmbH & Co. KG Distributor in Szczecin, POLAND.

  • Hydrovision Q-Eye Radar MT radar doppler

    Category: Discharge Measurement:-Cost-effective measuring system for stationary flow measurement in streams, rivers and channels, consisting of type MT measurement transducer and a contactless RV Radar Doppler Sensor-Wireless programming and configuration via WLAN and browser (smartphone, tablet, laptop) with the 'SetUp' software-1D RV30 Radar ...

    By SEBA Hydrometrie GmbH & Co. KG Distributor in Szczecin, POLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you