Only show results in Massachusetts? Ok

pulp and paper waste equipment

  • Premium

    MICROBE-LIFT® / PP - Pulp & Paper Wastewater Treatment

    MICROBE-LIFT® / PP is a highly active dry culture consortium designed for use in the biological treatment of pulp and paper waste. MICROBE-LIFT® / PP reduces shock loading, provides rapid upset recovery and provides rapid system start up following facility down time. These cultures are designed to enhance the overall biological oxidation ...

    By Ecological Laboratories Inc based in Cape Coral, FLORIDA (USA). from MICROBE-LIFT® Wastewater Treatment Products Product line

  • Premium

    Wood and Paper Shredders

    Our industrial paper shredders are designed to process paper, cardboard, and pulp waste. The shredded material is then used to manufacture new products, enabling manufacturers to efficiently recycle paper products. In addition, industrial paper shredders are used to ensure secure and total destruction of documents.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA). from Industrial Recycling & Shredding Applications Product line

  • Premium

    Fluence TWISTER - Low-Speed Surface Aerator

    This surface aerator provides high-oxygen transfer rates for the most challenging and heavily loaded industrial and municipal applications. Long-lasting performance, and the highest oxygen-transfer rates of any mechanical aeration system on the market. The TWISTER low-speed aerator is designed for long-term, continuous operation. Twister optimizes ...

    By Fluence Corporation based in White Plains, NEW YORK (USA). from Aeration Equipments Product line

  • Premium

    Proco - Model Series 300 - Flanged Rubber Pipe Connectors

    Each Proco Series 300 Flanged Rubber Pipe Connector is specifically engineered for your particular application. Multiple plies of tough fabric and helical spring steel wire are embedded into the pipe wall during the manufacturing process, resulting in a product precisely designed for your pressure and vacuum requirements.

  • Premium

    Sulfides/Mercaptans

    H2S: Hydrogen Sulfide is most often found in the off-gases from Waste Water Treatment plants and certain Pulp and Paper processes (here along with other TRS-total reduced sulfur- compounds), Hydrogen Sulfide reacts readily with aqueous NaOH but often aqueous NaOH alone is not the preferred choice for scrubbing.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA). from Pollutants Product line

  • Premium

    Komline-Sanderson - Plunger Pump

    K-S Plunger Pumps are engineered for heavy duty service in difficult sludge, slurry, float transfer, or metering applications. It is a self-priming positive displacement pump that can pass solid objects up to 1-5/8' in diameter, rags, or entrained air. Our pumps have capacities to 34 liters per second (540 gpm) at heads to 90 meters (300 feet). ...

    By Komline-Sanderson based in Peapack, NEW JERSEY (USA). from Plunger Pump Product line

  • Premium

    Komline-Sanderson Gravabelt - Gravity Belt Thickener

    Gravabelt Gravity Belt Thickeners reduce sludge volume of biosolids and waste activated sludge and produce a pumpable concentrate for dewatering, transport, or further digestion. The K-S Gravabelt uses only gravity and a porous drainage belt along with our Roto-Kone High Rate Drainage system to enhance thickening performance at a reduced operating ...

    By Komline-Sanderson based in Peapack, NEW JERSEY (USA). from Gravity Belt Thickener Product line

  • Premium

    ACME - Model Y Type - Strainers

    Most cost effective, Y strainer uses perforated wire-mesh or wedge wire to trap unwanted solids from a process stream. Y strainer can be mounted vertically or horizontally in a piping system strainer are low cost solution to large nominal bore straining requirements. Y strainer are commonly used in pipelines to prevent damage of Gauges, pumps, ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Strainers Product line

  • Premium

    Fingo - Air Pollution Control Technologies

    Our technologies are suitable for power generation and industrial applications, including aluminum, iron and steel, oil and gas, cement, waste-to-energy, biomass, pulp and paper, and nonferrous metals, among others.

    By Fingo based in Moscow, RUSSIA. from Technologies Product line

  • BIOBUG PP

    BIOBUG® PP contains a specially formulated range of adapted high performance microorganisms and fungi. BIOBUG® PP was developed to increase efficiency and decrease costs in biological treatment of pulp and paper wastes. The range of microorganisms selected for the BIOBUG® PP products are chosen for their cellulose degradation abilities under both ...

    By EnviroZyme™ - Bio-Systems International based in Beloit, WISCONSIN (USA).

  • Resilient Seated Butterfly Valves

    A-T Controls Butterfly Valves cover a wide range of industries from General Purpose to Chemical, Food and Beverage, Pulp and Paper, Waste Water applications and more. The product line features many choices of seat, disc and stem materials which enable you to address a wide variety of applications and media. A-T Controls Butterfly Valves are ...

    By A-T Controls, Inc. based in Cincinnati, OHIO (USA). from Butterfly Valves Product line

  • WTP - Shaftless Screw Conveyors

    Shaftless screw conveyors, an enclosed conveying system designed without internal shafts or bearings to eliminate wrapping and plugging, are the equipment of choice for handling wet, coarse, sticky and stringy materials: wastewater screenings, dewatered sludge, grit, food processing and pulp and paper wastes. Choose from standard equipment designs ...

    By WTP Equipment Corp. based in Brampton, ONTARIO (CANADA).

  • DeZURIK - Model KGN-RSB & KGN-MSU - Cast Stainless Steel Knife Gate Valves

    DeZURIK KGN Knife Gate valves are available as a bi-directional resilient seated valve or a unidirectional metal seated valve. KGN-RSB Bi-Directional Resilient Seated Knife Gate Valves are designed for isolation, on-off applications in corrosive, abrasive liquid applications in Pulp & Paper, Mining, Waste Water, Chemical, Petrochemical, Power ...

    By DeZurik APCO Hilton based in Sartell, MINNESOTA (USA). from Knife Gate Valves Product line

  • Screw Press

    Press Technology is a developer and manufacturer of cutting edge screw presses for pulp and paper, municipal waste and other industrial applications. A leader in new screw press design, Press Technology specializes in developing and manufacturing equipment tailored to meet customer requirements and demands.

    By Press Technology & Mfg., Inc. based in Springfield, OHIO (USA).

  • Andritz - Model AD Series - Self-Priming Centrifugal Pumps

    ANDRITZ self-priming centrifugal pumps fulfill high customer expectations regarding efficiency, life cycle, maintenance friendliness and economic efficiency. ANDRITZ self-priming pumps, AD series, achieve high priming and degassing performance thanks to the integrated vacuum pump. With its semi-open impeller, the pump is designed for transporting ...

    By Andritz Ritz GmbH based in Schwäbisch Gmünd,, GERMANY. from Centrifugal Pumps Product line

  • Shingenzyme - Paper Filteration Enzyme

    According to the characteristics of pulp in waste paper and paper industry, this product selectively degraded water-soluble colloids and some useless fiber particles in the pulp, so as to improve the water removal of the pulp and water permeability of paper machines.

    By Shanghai Shinge Biochemical Industry Co.,Ltd based in Songjiang District, CHINA. from Enzymes - Used in Paper Industry Product line

  • Model U-250 - Knife Gate Valves

    Solid Single piece cast body. Designed as per MSS SP 81. Sealing with Rubber material in the interior center part of the body inside the cavity opening gives 100% leak proof. Smooth flow and non clogging full port design. The valve can be mounted in both pressure direction. For throttling and metering application we provide V-PORT fixtures also. ...

    By V-Tork Controls based in Coimbatore, INDIA. from Knife Gate Valves - Uni Directional Product line

  • Konecranes - Forklifts - Lift Trucks

    Konecranes' SMV forklift trucks – tackling your toughest material handling needs. With a lifting capacity of 10-80 tons, our forklift trucks are built tough to get the job done. We adapt each lift truck so that it is ideally suited to efficiently execute your most demanding tasks. A rigid, box-section chassis and a load-sensing hydraulic ...

    By Linder Industrial Machinery Company based in Jacksonville, FLORIDA (USA).

  • Discflo Pumps

    DISCFLO Pumps: Providing High Reliability, Extremely Long Life, and Peace of Mind pumping for various industries including municipal, phosphate, pulp and paper, food, power generation, waste resources, and general industry is our specialty.

    By Gerber Pumps International, Inc. based in Longwood, FLORIDA (USA).

  • UET - Model XCEL-300 to 1500 Series - Mixers

    XCEL-300 to 1500 Series mixers are engineered and manufactured specifically for the demanding operating parameters associated with mixing applications. Standard designs are available with pumping rates up to 500,000 gpm. These mixers are ideal for chemical and food processing, pulp and paper, and water and waste treatment applications.

    By United Equipment Technologies (UET) Mixers, Inc. based in Mechanic Falls, MAINE (USA). from XCEL Series Mixers (Process Mixers) Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you