Radioactive Waste Equipment
-
Manufactured by BMH Technology Oybased in FINLAND
BMH delivers equipment for processing of low radioactive waste. In the system waste is crushed to small particle size, thus allowing optimal compacting of material. The waste might consist of textiles, electric cabinets, lightning systems, furniture etc. Compacting degrees of 20 to 1 can be reached, thus enabling cost savings in ...
-
Manufactured by Klotz GmbHbased in GERMANY
For the disposal from nuclear power stations, it is necessary to seal the nuclear waste with glass and cast it in moulds. The handling of those moulds occurs in a manless system. This is aggravated by the fact that the temperature in the bottles is approx. 600 C. For the handling of such moulds a gripper is to be ...
-
Manufactured by Joseph Oat Corporationbased in USA
Joseph Oat Corporation has a wealth of experience in the mechanical design and manufacture of Radioactive Fuel and Waste Storage Containers and Canisters. Our large and well equipped manufacturing facility is capable of producing containers ranging from large and heavy dry casks used for on-site storage of fuel to smaller but precision ...
-
based in BULGARIA
Reinforced concrete container „B-B CUBE”® for temporary and permanent storage of hazardous and radioactive waste The reinforced concrete container „B-B CUBE”® is designed for safe storage of waste. It is produced in two types – for hazardous waste and for radioactive waste. The ...
-
Manufactured by STCF Equipementsbased in FRANCE
Stools, urines and flush waters of patients receiving Nuclear Medicine treatment should be eliminated in a dedicated network ending in a septic tank, called delay ...
-
Manufactured by STCF Equipementsbased in FRANCE
STCF Equipements designs and installs tailor-made configurations for your radioactive effluent decay ...
-
Manufactured by STCF Equipementsbased in FRANCE
The STCF Equipements WC separator enables the separation and the recovery of the urine generated by patients treated in Iratherapy ...
-
Manufactured by STCF Equipementsbased in FRANCE
STCF Equipements offers for radiopharmacies generating small quantities of contaminated liquid effluent, adjustable decay tanks placed under ...
-
Manufactured by VF, a.s.based in CZECH REPUBLIC
“Waste-Scan” WAM-300 monitors are used for spectrometric characterization of radioactive waste. It can be used in nuclear power plants, waste repositories, science facilities, reprocessing plants etc. for typically LLW/ILW measurements or free ...
-
Manufactured by VF, a.s.based in CZECH REPUBLIC
'Waste-Scan' WAM-100 monitors are used for spectrometric characterization of radioactive waste. It can be used in nuclear power plants, waste repositories, science facilities, reprocessing plants etc. typically for LLW measurements or free ...
-
Manufactured by VF, a.s.based in CZECH REPUBLIC
VF RMS radiation monitoring system is a modular and standardized system for the radiological monitoring. Variety of radiation monitors, display and alarm units can be connected to the RMS ...
-
Manufactured by VF, a.s.based in CZECH REPUBLIC
The Hot Cell represents a complex workplace for handling sealed radioactive sources. It provides personnel with maximum radiation protection. The actual design can be adapted to the particular needs of the ...
-
Manufactured by VF, a.s.based in CZECH REPUBLIC
The Semi-hot Cell represents a complex workplace for treating solid or liquid radioactive emitters and provides personnel with maximum radiation protection. The actual model can be adapted to the particular needs of the ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Geochemistry plays an important role in the storage of radioactive waste in deep geological repositories. The chemical composition of the host rock and groundwater is the subject of many investigations. The transport properties of the host rock and the influences of the construction and operation of a repository on the geochemistry are ...
-
PremiumManufactured by CETCObased in USA
QUIK-SOLID Booms are a higher performing alternative to traditional cellulose absorbent products that are utilized for hazardous, non hazardous and low level radioactive waste disposal. QUIK-SOLID superabsorbent media and a cellulose filler material are packaged in a closed nylon sock to ensure maximum polymer retention and absorbency. The ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The Hybrid Multi-Packer System (HMPS) combines the advantages of the Stand-Pipe Multi-Packer System and the conventional Multi-Packer ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The Pump Multi-Packer System (PMPS) is a conventional multi-packer system with a double-valve pump and pressure sensor installed in the test ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The Multi-Packer System is a versatile and cost-effective multiple packer system that can already be installed in very small borehole diameters (from 50 ...
-
PremiumManufactured by Granutech-Saturn Systemsbased in USA
The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements. Granutech’s Saturn ...
-
PremiumManufactured by CETCObased in USA
QUIK-SOLID Mats are a high-performing yet lower cost alternative to other absorbent fabric products that are used in the hazardous waste or nuclear waste disposal industry. QUIK-SOLID Mats are made with polyester fabric layers bonded together with a special polyolefin adhesive. The QUIK-SOLID granular absorbent polymer is imbedded ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you