We couldn't find any rain gauge equipment suppliers or service providers located in Nebraska
Here is a list of equipment results with suppliers serving Nebraska
Rain Gauge Equipment Available In Nebraska
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Raingauge, compact (6m cable), including mast ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For detection of precipitation volumes. Rain gauge for detection of precipitation volumes and for GPRS transmission to D2W Internetportal with comprehensive options for evaluation, verification and output of ...
-
PremiumManufactured by KISTERSbased in GERMANY
KISTERS TB3 is a high-quality tipping bucket rain gauge for measuring rainfall and precipitation in urban and rural locations. Due to the integrated syphon, the gauge delivers high levels of accuracy across a broad range of rainfall intensities. With the optional heater the TB3 is the ideal device for cold ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Raingauge, compact (6m cable), including levelling ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
OSi's ORG (Optical Rain Gauge) is a superior tool for rain measurement. The ORG® is the only instrument available to measure true rain rate. This means you avoid the reading errors due to mechanical limitations, which plague other low-tech gauges. No other rain sensor comes close to the ORG ...
-
Manufactured by ZOGLAB Microsystem Co., Ltdbased in USA
RG100 Rain gauge uses a new generation of tipping bucket technology with a precision ceramic blade design, the measurement resolution can reach to 0.1mm, maximum allowable error is ±0.4mm(≤10mm) . Meanwhile its output signal can directly connect to data collector system through switch signal, RS485, Bluetooth (configured additional wireless ...
-
Manufactured by In-Situ Environmentalbased in USA
Raingauge - Aerodynamic 0.2mm Tipping Bucket - for use with Data loggers. A professional tipping bucket rain gauge for Environmental Monitoring Networks. A conventionally shaped rain gauge interferes with the airflow so that the catch is reduced. The low cost ARG100 aerodynamic rain gauge has ...
-
Manufactured by mOOvementbased in AUSTRALIA
Tipping bucket rain gauge - 18 cm x 18 cm x 39 cm. Accuracy: 2% up to 25 mm/hr. 3% up to 50 mm/hr. Resolution: 0.1 mm per tip and Catchment area: 200 cm2. Uses 2 x C type alkaline ...
-
Manufactured by Environmental Measurements Limited (EML)based in UNITED KINGDOM
The unique aerodynamic profile of the ARG314 tipping bucket rain gauge increases measurement accuracy by capturing more rainfall than traditionally shaped cylindrical gauges. The shape is based on the extremely successful SBS aluminium rain gauge, also manufactured by EML. The difference between the two ...
-
Manufactured by Environmental Measurements Limited (EML)based in UNITED KINGDOM
The SBS range is our recommended solution for meteorologists and hydrologist professionals. The unique design and aerodynamic shape of the SBS Tipping Bucket precipitation sensor increases measurement accuracy by capturing more rainfall than traditionally shaped cylindrical gauges. The SBS is precision-engineered to minimise ...
-
Distributed by Scientific Sales, Inc.based in USA
The TR-525USW Rainfall Sensor is a remote tipping bucket style rain gauge that measures the amount of liquid precipitation. This sensor is specifically designed to meet the National Weather Service's requirements for rainfall measurement. The TR-525USW rain gauge is a freestanding receptacle for measuring precipitation. It ...
-
Manufactured by Maid Labs Technologies Inc.based in CANADA
MLRG Rain Gauge US National Weather Services approved. 0.01″ (0.0254 mm) per ...
-
Manufactured by OmniSitebased in USA
The Rain Gauge is a tipping bucket style rain collector. Once the rain gauge measures.01' of rain the gauge will tip and close the contact closure. The enclosure is made of a UV-stabilized ABS plastic. Works only with XR50 and Crystal Ball (must be connected to Input #5). The ...
-
Manufactured by Ranchbot Monitoring Solutionsbased in AUSTRALIA
Ranchbot Rain Gauge provides information of daily rainfall for specific locations on your ranch. Understand local micro-climates and make informed decisions about your operations, pasture development and yield potential before stepping ...
-
Manufactured by NESA Srlbased in ITALY
Sensor in A Class, according to UNI11452:2012 for the measurement of precipitation with collection surface of 400cm2, realized in aluminum alloy with anodizing treatment for protection against salt and oxidizing agents. According to WMO norms for environmental monitoring. Measurement system with knife blade support for tilting bucket in stainless steel with a special system to reduce friction, ...
-
Manufactured by Forest Technology Systems Ltd. (FTS) - an AEM brandbased in CANADA
Use Case: Fire Weather; low powered requirements. Accuracy (% of reading): ±2% at 1 mm/min (2”/hr). Resolution: Imperial: 0.01″ per tip. Metric: 0.2mm per tip. Operating Temperature: 0°C to +60°C, -30°C to +60°C (heated). Measuring Principle: Tipping mechanism. Power Consumption: 0mA (contact closure), 1.1A (with heater on). Communication: Digital output. ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The HYDREKA rain gauge is a reliable and robust sensor that provides precision rainfall measurement on a given site.A heated version is available to record winter precipitation (hail or snow). Based on small buckets that tip at 0.2 mm, its dry contact signal (Reed bulb type sensor) can be connected to one of the HYDREKA standalone data ...
-
based in UNITED KINGDOM
Our Rain Gauge is an instrument for determing the depth of precipitation (usually in mm) that occurs over a unit area (usually one metre squared) and thus measuring rainfall ...
-
Manufactured by Ames d.o.o.based in SLOVENIA
MR3H-F is used to measure quantity and intensity of precipitation. Inside there is a tipping bucket with the 5ml containers. When the first container is full it turns over and the other starts to fill. When turn occurs, it breaks the light beam of an optoelectric transducer and generates an electric pulse. There is a heater built in, to prevent freezing. Temperature at which heater turns on is ...
-
Manufactured by Nu-Tech Internationalbased in INDIA
and 120 minutes. Logger capacity is 7,000 intervals. Use with SpecWare 6 Software for analysis and reporting. The logger is conveniently stored inside the rain collector. Accuracy: +/-2% @1.0in per hour. Mounting bracket and mounting hardware included. The user-replaceable 3-volt battery lasts 8 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you