recovery separator equipment in United Kingdom

  • Eco - Separator

    These high performance gyratory sifters offer a cost effective solution to virtually any screening requirement, including sizing, scalping, safety screening, grading or product recovery. To best fit into your production line and to make sure we can handle whatever throughput you require, the Russell Eco Separator® is available in six sizes: ...

    By Russell Finex N.V. Office in Feltham, UNITED KINGDOM. from Separator Product line

  • Minerals Separator

    The Minerals Separator provides high volume and unsurpassed screening performance for applications requiring accurate separations. They are specifically designed to meet the demanding screening requirements of high-volume applications, including Frac Sand, Potash, Bentonite and more. The Minerals Separator is able to maximize product recoveries at ...

    By Rotex Office in Runcorn, UNITED KINGDOM. from Minerals Separator Product line

  • Model VOG - Disc Separator

    A multi stage high gradient disc electro magnetic separator for the concentration or purification of dry granular minerals such as limenite, garnet, columbite-tantalite and quartz. This equipment produces very clean fractions with high magnetics recovery and high selectivity.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM. from Disc Separator Product line

  • Vibro-Energy - Vibratory Separators

    Vibratory separators for screening, sieving, sifting, grading and classification duties in all industries including abrasives, agrochemical, brewing, ceramics, chemical, distilling, food, fuel, glass, latex, metal powder, mineral, paint, paper, petroleum, recycling, rubber and waste recovery industries.

    By William Boulton Ltd. based in Stoke-on-Trent, UNITED KINGDOM.

  • Model MRF - Material Recovery Plants

    Sorting plants of various combinations and capacities: for paper, card and board material , for bio waste, for building waste, for mixed building waste, for household and industrial waste, for post consumer plastics, for paper and card separation.

    By Rodan Engineering Company Ltd. based in Leigh, UNITED KINGDOM. from Material Recovery Plants Product line

  • Lamor - Model LRB 250 W - Oil Recovery Bucket

    The Oil Recovery Bucket LRB 250 W is ideal for pit cleaning and oil recovery operations on land, offshore and in Arctic conditions. The LRB is based on the proven Lamor stiff-brush wheel technology and it automatically separates oils, emulsions and oily debris from sea water or soils.

    By Lamor Corporation Ab Office in Cowes, UNITED KINGDOM. from Oil Recovery Bucket Product line

  • Lamor - Model LRB 40 W - Oil Recovery Bucket

    The Oil Recovery Bucket LRB 40 W system is ideal for pit cleaning and oil recovery operations on land, offshore and in Arctic conditions. The LRB is a light bucket skimmer that is based on the proven Lamor stiff- brush wheel technology and it automatically separates oils, emulsions and oily debris from sea water or soils.

    By Lamor Corporation Ab Office in Cowes, UNITED KINGDOM. from Oil Recovery Bucket Product line

  • Lamor - Model LRB 150 W - Oil Recovery Bucket

    The Oil Recovery Bucket LRB 150 W is ideal for pit cleaning and oil recovery operations on land, offshore and in Arctic conditions. The LRB is based on the proven Lamor stiff-brush wheel technology and it automatically separates oils, emulsions and oily debris from sea water or soils.

    By Lamor Corporation Ab Office in Cowes, UNITED KINGDOM. from Oil Recovery Bucket Product line

  • LESNI - Solvent Recovery Plant

    LESNI designs and builds fully automated single and multiple activated carbon bed adsorption plants. This facilitates the recovery of chemicals by steam regeneration for mixed VOC and individual high value solvents. The purification process includes efficient cleaning of the plume generated by the drying air as well the pure separation ...

    By Lesni A/S Office in Sutton Coldfield, UNITED KINGDOM.

  • Eriez ProSort - Model II - Eddy Current Separators

    Eriez ProSort improves metal separation while operating at a fraction of the cost of air power metal sorters. Ideal for scrap processors, the new airless ProSort II doubles the number of metal sensors found on the original ProSort machine and positions them on one-inch centers. These high resolution sensors are aligned with a new inverted padd ...

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM. from Eddy Current Separators Product line

  • Wet Drum Separators

    For automatic, continuous recovery of magnetite or ferrosilicon in heavy media operations and concentration of ferrous and weakly magnetic ores.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM. from Wet Drum Separators Product line

  • Dynamic Drum Separator (DDS)

    Eriez have a new separation technique for the removal of fine iron from fine, dry powders using the Dynamic Drum Separator. The success of the DDS is attributed to the unique Eriez Dynamic Agitation Effect. This greatly improves magnetics recovery and minimises product loss

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM. from Dynamic Drum Separator (DDS) Product line

  • STEINERT - Model NES - Non-Ferrous Metal Separator

    The mechanical recovery of non-ferrous metals is the economic basis of all recycling – and theSTEINERT NES Eddy Current Separator with Eccentric Pole System fulfills the associated requirements perfectly! High yield and long life are the qualities that make for assured, long-term operating result. The CanMaster is ...

    By Steinert Elektromagnetbau GmbH Office in Cheam, UNITED KINGDOM. from Non-Ferrous Metal Separator Product line

  • Flo-Starch™ - Starch Recovery and Water Reclaim System

    Auxiliary systems are an integral part of food processing and Flo-Starch is provided to deal with wastewater. Designed to separate non-gelatinised starch from process water, Flo-Starch can quickly and simply be added to any new, or existing, process line.

    By Flo-Mech Ltd. based in Peterborough, UNITED KINGDOM.

  • CRS - Static Trommel Fines Recovery Plants

    CRS design, manufacture and install Static Trommel Fines Recovery Plants separating paper and plastics from aggregate and fine materials. CRS Trommel Fines drastically reduces landfill costs by segregating the fines from papers and plastics as well as extracting the aggregates.

    By CRS NI LTD based in Carrickmore, Co.Tyrone., UNITED KINGDOM.

  • Fixed Abrasive Vacuum Recovery Unit (IND200P)

    An economic and compact unit, the IND200P consists of a small hopper sunk into the blastroom floor, abrasive silo and vacuum producing unit. The system allows for up to three hours continuous production before recovery of media is required. Expended media is manually swept into the hopper and retrieved by vacuum into the silo and blast machine. ...

    By Hodge Clemco Ltd. based in South Yorkshire, UNITED KINGDOM. from Fixed Abrasive Vacuum Recovery Unit (IND200P) Product line

  • Eriez - Wet High Intensity Magnetic Separators (WHIMS)

    Wet High Intensity Magnetic Separators (WHIMS) are ideal for high capacity, continuous removal or concentration of feebly magnetic materials. Eriez presently offers commercial models, plus three types of laboratory/pilot plant units, which have proven an excellent performance on even weakly magnetic materials: higher recovery (4-6% higher at the ...

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM. from Wet High Intensity Magnetic Separators (WHIMS) Product line

  • Premium

    Mastermag - Permanent Overband Magnets

    The Mastermag overband separators are renowned around the world as the most effective units for the continuous removal of tramp ferrous material from a product stream. This type of magnetic separator is used to protect, clean and separate materials on applications in the recycling and quarrying industries, allowing for metal recovery. Most ...

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • CD-XXL™ - Model C&D - Recycling Systems

    The CD-XXL is a medium to high tonnage C&D recycling system designed for high efficiency recovery of material. Systems include primary and secondary screening, metals separation, air classification, and primary and secondary pick lines. Each system can be custom designed to meet your recovery objectives.

    By General Kinematics Office in Kingswinford, UNITED KINGDOM. from Recycling Systems Product line

  • Magnapower - Overband Magnets

    The Magnapower range of Overband Magnet Separators are designed and manufactured to provide the highest possible ferrous metal recovery rates. They are built to an industry setting standard and are renowned for high performance and reliability.

    By Magnapower Equipment Ltd based in Bromsgrove, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you