recovery separator equipment in California

  • Enhanced Recovery Tank Separation System (ERT)

    This Enhanced Recovery Tank Separation System (ERT) is very widely used in West Texas and in installations worldwide. This simple tank design is effective for predictable accountability of produced/industrial water separation technology (oil/water/solids). No excess gas inducing nozzles, internal tank baffles, spreader plates or special pumps are ...

    By Separation Specialists Inc. based in Bakersfield, CALIFORNIA (USA).

  • Model CS / SS - Centrifugal Separators

    Griswold Centrifugal Separators can be installed in either full flow or side stream configurations. Griswold Centrifugal Separator Systems are designed as self-contained units for cooling tower and cooling system cleaning. Our Dual Stage High Efficiency Separators come in two configurations: our CSS model (with Auto Purge System – used for ...

    By Griswold Water Systems (GWS) based in Irvine, CALIFORNIA (USA). from Centrifugal Separators Product line

  • SeedTech - Model STS-MACS 104 - Air Separators

    We offer two different types of air separators. Our wall and cabinet mounted separators utilize a pressurized vacuum method of separation. Our multiple air chamber systems use stratified columns of pressurized air to separate products. Both systems offer outstanding results and have been proven to be highly effective in upgrading seed lot quality. ...

    By SeedTech Systems, LLC based in Wilton, CALIFORNIA (USA).

  • Material Recovery Station

    The MODRoto Material Recovery Station automatically separates liquids from solids to allow both to be collected for recycling. This self-contained, solid-liquid separation system collects and accumulates a wide range of scrap, waste and recyclable materials using a proprietary screening panel that captures the solid particles while liquids are ...

    By MODRoto Office in La Mirada, CALIFORNIA (USA). from Material Recovery Station Product line

  • Goslyn - Model GRD - Grease Recovery Device

    The Goslyn is an immiscible liquid separator which operates under hydro static pressure and does not have any moving parts. Innovative (patent pending) technology has the capability to continuously and permanently remove Fats, Oils & Greases from waste effluent. It keeps drains free and clear while eliminating the need for costly dousing ...

    By FogBusters, Inc. based in Oakland, CALIFORNIA (USA).

  • Eddy Current Separator

    Our eddy current separator is designed to increase aluminum recovery in MRF’s. The separator yields the best separation of nonferrous metal from non-metallic contamination. As aluminum cans or other non-ferrous metals pass over the drum, the alternating magnetic field creates eddy currents that repel the material away from the conveyor. ...

    By Krause Manufacturing Inc (KMI) Office in San Diego, CALIFORNIA (USA). from Eddy Current Separator Product line

  • Griswold - Model CSS / CSR - Centrifugal Separator Systems

    Griswold Water Systems’ centrifugal separators are designed to optimize settleable solids removal from your water system. Fabricated domestically and built to ASME standards, our stand-alone separators and separator systems, complete with pump, pump control panel, piping pressuring gauge, and basket strainer (standard on High Head Systems), ...

    By Griswold Water Systems (GWS) based in Irvine, CALIFORNIA (USA). from Centrifugal Separator Systems Product line

  • Tailings Solvent Recovery Heater

    Komax Systems, Inc., through patented technology, employ Komax severe duty steam heaters to help optimize the Oil Sands separation process.  Our designs are made to endure the harshest operating conditions possible.  These innovations allow oilsands processors to take advantage of the high thermal efficiency and instant controllability ...

    By Komax Systems, Inc. based in Huntington Beach, CALIFORNIA (USA). from Tailings Solvent Recovery Heater Product line

  • Watermeister - Two Stage Wash Water Recovery System

    The H2O Boy's low cost Two Stage Water Recovery System makes it easy for any mobile washing professional to get into compliance. The simple design of the system is easy to use with any portable recycle unit to give you a true 'closed loop' system with zero discharge to storm drains. The vacuum's powerful two stage motor mounted on top of a heavy ...

    By Watermeister based in Lakeside, CALIFORNIA (USA).

  • Overbelt Magnet

    The Over-Belt Electro Magnetic Separator allows for efficient separation and recovery of ferrous metal material. The magnet is placed over the stainless steel section in your conveyor and ferrous material is attracted to the electro-magnet force above which adheres to the conveyor belt allowing for transfer of the ferrous material to silo or ...

    By Krause Manufacturing Inc (KMI) Office in San Diego, CALIFORNIA (USA). from Overbelt Magnet Product line

  • Front-end Waste to Energy

    CP’s MSW recycling systems can be used as front-end separation systems for waste-to-energy technologies. Our equipment makes it possible to extract recyclables at the highest recovery rates and produce the specific feed required for energy conversions, while removing harmful contaminates.

    By The CP Group based in San Diego, CALIFORNIA (USA). from Front-end Waste to Energy Product line

  • TerraTherm - Steam Enhanced Extraction (SEE)

    TerraTherm offers Steam Enhanced Extraction, a highly effective technology used for the recovery of free product and the remediation of volatile organic compounds (VOCs) since the mid-1990s. Steam Enhanced Extraction achieves on-site separation and treatment through steam injection into wells and extraction of hot fluids. Steam propagation is a ...

    By TerraTherm - a Cascade Company Office in Keene, CALIFORNIA (USA).

  • Model SAF - Suspended Air Flotation Systems

    Suspended Air Flotation (SAF) is a cutting edge wastewater treatment offered by Heron Innovators (See Wastewater Engineering Treatment and Resource Recovery, Metcalf & Eddy/AECOM, pp. 409-10.) This advanced system is the result of over 14 years of development and represents a leap forward in flotation separation technology.

    By Heron Innovators based in Rocklin, CALIFORNIA (USA).

  • Recycling Sorting Systems

    We have engineered, manufactured, and installed over 400 material recovery facilities (MRFs). We have equipment and separation systems on 6 continents. Not only do our systems provide the highest efficiency in producing marketable end-products, you also will experience minimized labor costs, maximized throughput, and conservation of energy with ...

    By The CP Group based in San Diego, CALIFORNIA (USA). from Recycling Sorting Systems Product line

  • ProElut LLE+ - Liquid-Liquid Extraction

    ProElut LLE+ has been widely applied in the sample preparation of urine, whole blood, plasma, serum, gastric juice, liquor, amniotic fluid, and animal and plant tissue. Classical liquid-liquid extraction using a separation funnel is often associated with certain disadvantages such as formation of emulsion, poor phase separation, high solvent ...

    By Dikma Technologies Inc. based in Lake Forest, CALIFORNIA (USA). from Liquid-Liquid Extraction Product line

  • Skim-pak - Model Series 2500 - Stainless Steel Flow - Control and Floating Fixed Weir Surface Skimmer Systems

    Skim-pak series 2500 is also designed for operations such as: Sumps up to 12 x 12 feet. Storage Tanks up to 10,000 gallons. Equalization Tanks. Settling Ponds. Oil/Water Separators. Waste Water Intake, Treatment and Discharge. Lift Stations. Environmental: Oil and other VOC Spill Recovery. Surface Water Pollution Control and Remediation. Leachate ...

    By Skim-pak based in Monterey, CALIFORNIA (USA). from Stainless Steel Flow - Control and Floating Fixed Weir Surface Skimmer Systems Product line

  • BKT - Model FMX - Revolutionary Anti-Fouling Membrane System

    FMX is a new anti-fouling membrane system based on the simple, yet innovative concept of using vortices to prevent fouling of the membrane for high density, high viscosity, and high solid applications. FMX has been used for wastewater treatment, separation and dewatering in manufacturing processes and recovery (reuse, recycle) applications in ...

    By BKT United based in Anaheim, CALIFORNIA (USA). from Revolutionary Anti-Fouling Membrane System Product line

  • NLB Spin Jet - Model SRT-10-W - Crawler System

    SRT-10-W SPIN JET® Crawler System is rated for operation at pressures up to 40,000 psi (2,800 bar) and flows up to 10 gpm (37.8 lpm).  The SRT-10-W features wireless controls and attaches itself using vacuum to vertical and horizontal surfaces to provide the fastest and cleanest way to remove coating from concrete and steel.  The ...

    By NLB Corp. Office in Signal Hill, CALIFORNIA (USA). from Crawler System Product line

  • Premium

    Redoma - Model SM Series - Screening Machine - Up to 1300 kg/h

    The screening machine is used for recovery of small copper and aluminium particles - so called fines - from the insulation of granulated and separated cable. It is always installed as an additional unit, including transport equipment, after a REDOMA separator.

    By Redoma Recycling AB Distributor in CALIFORNIA (USA).

  • Premium

    WesTech HiFlo™ - High-rate Thickeners

    WesTech HiFlo™ high-rate thickeners are used in many types of process circuits to separate liquids and solids at very high rates. They are highly effective in coal refuse thickening, gold recovery, CCD circuits, copper leaching, molybdenum processing and other mining and chemical flowsheets. Separation is effected rapidly because of the system ...

    By WesTech Engineering, Inc. Distributor in CALIFORNIA (USA). from High-rate Thickeners Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you