recovery separator equipment in Texas

  • Downstream Separation System

    Proven solutions customized to shredder & property constraints. We are aligned with the best magnet/sensor manufacturers. Closed Loop Air Systems available. Robust conveyor and platform designs that are built to last. Systems designed for minimal spillage and higher recovery rates.

    By 3TEK Global based in Grand Prairie,, TEXAS (USA).

  • Material Separation Technologies

    REI offers a wide-array of technologies to meet even the most complex material separation challenges. The need to extract and separate miniscule particles from recyclables is growing at a rapid pace domestically and throughout the world.  The environmental impact of recycling is measurably improved as we migrate to technologies that allow for ...

    By Recycling Equipment Inc. (REI) Office in Fort Worth, TEXAS (USA). from Material Separation Technologies Product line

  • Natural Gas Liquids Recovery System

    Natural gas liquids recovery allows the processor to separate and purify heavier hydrocarbons from natural gas. Heavier hydrocarbons are more likely to condense into liquids under pressure in a pipeline, slowing the flow and increasing the wear on the piping. Extracted hydrocarbons, such as propane, butane, and naphtha, can be sold more profitably ...

    By Sep-Pro Systems, Inc. based in Houston, TEXAS (USA).

  • Model SV-35 - Sand and Steel Grit Recovery Systems

    3,200 CFM. 38' Diameter cyclone. 6' Diameter suction hose.  200 HP Diesel engine. Wet/Dry single mode five filter cyclone, 50 bags. o 8'x13' Footprint. Blower and filtration on separate stackable skids

    By GapVax, Inc. Office in La Porte,, TEXAS (USA).

  • Ecolotron - Model E-FLOC™ - Advanced Wastewater Recovery & Water Treatment Systems

    Electrocoagulation (EC) technology is based upon a process generally referred at as “adsorption and co-precipitation”.   The electrocoagulation water treatment solution offers an alternative to the use of metal salts or polymers and poly-electrolyte additives for breaking stable emulsions and suspensions in wastewater ...

    By Ecolotron, Inc. based in E. Dickinson, TEXAS (USA).

  • Premium

    Non-Ferrous Metal Scrap Processing

    Non-Ferrous Processing and Separation Application. Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales ...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA). from Non-Ferrous Metal Scrap Processing Product line

  • Premium

    Electronic Scrap shredding & Processing- E-Scrap

    Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, IT equipment and white goods need to be destroyed to extract recyclables or ensure the security of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic ...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA). from Electronic Scrap shredding & Processing- E-Scrap Product line

  • Premium

    Ferrous Metal Scrap Processing

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders ...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA). from Ferrous Metal Scrap Processing Product line

  • LPG Plants

    Natural gas processing equipment encompasses numerous unique processes. Natural gas liquids recovery (NGL) involves refrigerated gas plants, turboexpanders, debutanizers, depropanizers, and JT plants. The reason for an LPG plant could be hydrocarbon dew point control, natural gas liquids recovery, LPG production, propane recovery and butane ...

    By Sep-Pro Systems, Inc. based in Houston, TEXAS (USA).

  • Model Trial on Municipal Solid Waste - Landfill Avoidance

    The final challenge that ESR must face lies in the total elimination of landfill, and this brings us back to a trial that was conducted in Belgium in 1996 on 30,000 tons of MSW. This waste contained everything but food and garden waste, paper and cardboard. The results of this trial were fairly amazing: the floats of the 1.25 separator yielded an ...

    By ESR International LLC based in Dallas, TEXAS (USA).

  • DecaOil - Model DO - Three-Phase Decanter Centrifuge

    The Hiller DecaOil (3) three-phase centrifuge is a sophisticated solid-bowl centrifuge especially designed for highly efficient, simultaneous sedimentation of solids and separation of two immiscible liquid phases. Hiller high-performance decanting centrifuges achieve optimal process results with the highest possible level of reliability. The ...

    By Hiller Separation and Process based in Lampasas, TEXAS (USA).

  • SAS - Model MIST 103 - Drill Cuttings Cleaning System

    The SAS MIST 103 System is capable of cleaning drill cuttings at a rate of 5 - 40 tons per hour and achieve 0.2% - 3% oil cuttings. A very robust system that is easily moved and has low upfront investment costs, high throughout and is very versatile. The MIST 103 system will treat a range of solid waste types and heavy oil sludge. When combined ...

    By SAS Environmental Services Ltd. Office in Houston, TEXAS (USA). from Drill Cuttings Cleaning System Product line

  • ESI - Model CPI - Corrugated Plate Interceptors

    The ESI CPI is designed and engineered for oil recovery applications where energy usage and equipment costs are a determining factor. The CPI is a gravity separator where efficiency is determined by the rising velocity of the smallest particles that will be intercepted, usually greater than 50 microns. The plate pack is made of many closely spaced ...

    By Energy Specialties International (ESI) based in Houston, TEXAS (USA). from Corrugated Plate Interceptors Product line

  • KOSUN - drilling decanter centrifuge

    KOSUN drilling centrifuge can meet with different requirements of mud treatment under various drilling conditions, that can do sedimentation and separation for particles more than 2 um. After treatment, the mud can achieve ideal viscosity and proportion, results in better recycling, high efficiency, saving and environment protection.Drilling ...

  • NLB Spin Jet - Model SRT-10-W - Crawler System

    SRT-10-W SPIN JET® Crawler System is rated for operation at pressures up to 40,000 psi (2,800 bar) and flows up to 10 gpm (37.8 lpm).  The SRT-10-W features wireless controls and attaches itself using vacuum to vertical and horizontal surfaces to provide the fastest and cleanest way to remove coating from concrete and steel.  The ...

    By NLB Corp. Office in La Porte, TEXAS (USA). from Crawler System Product line

  • Tailings Solvent Recovery Heater

    Komax Systems, Inc., through patented technology, employ Komax severe duty steam heaters to help optimize the Oil Sands separation process.  Our designs are made to endure the harshest operating conditions possible.  These innovations allow oilsands processors to take advantage of the high thermal efficiency and instant controllability ...

    By Komax Systems, Inc. Distributor in Tomball, TEXAS (USA). from Tailings Solvent Recovery Heater Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you