Recuperative Thermal Oxidizer Equipment Available In Ukraine
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Thermal Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs), and odorous emissions discharged from various industrial processes using thermal oxidation and heat recovery. Anguil’s thermal recuperative ...
-
Manufactured by Filtracní Technika, Spol. S.r.o.based in CZECH REPUBLIC
With the use of a fan, waste air is discharged into the equipment, where it is pre-heated in the recuperative thermal heat exchanger. Usually, this is a shell-and-tube type heat exchanger. The contaminated air then passes through the oxidation chamber where the oxidation temperature is achieved with the use of a burner. There the ...
-
Manufactured by Process Combustion Ltd.based in UNITED KINGDOM
Our range of recuperative oxidisers are designed with a very high destructive efficiency, low outlet emissions and can handle varying solvent concentrations. Primary heat recovery enables the system to be energy efficient. Systems are supplied with a primary heat exchanger to heat the incoming air stream. Additional secondary heat systems ...
-
Manufactured by NESTEC, Inc.based in USA
For manufacturers that need to maximize their space, some thermal oxidation systems can be a heavy burden. Depending on the needs of individual businesses, a regenerative thermal oxidizer or direct-fired thermal oxidizer may be a difficult system to integrate due to the size of units and costs of ...
-
Manufactured by Colt Technologies, Inc.based in USA
A modular design available in pre-engineered sizes ranging from 100 scfm to over 30,000 scfm. A variety of arrangements are available to suit your process requirements. The factory assembled and tested units are trial run prior to shipping to minimize field installation ...
-
Manufactured by Airprotech - Deurotech Groupbased in ITALY
Recuperative thermal oxidizers are composed by a main combustion chamber for thermal oxidation of pollutants at high temperature with an integrated heat exchanger to recover the heat from hot gases generated in the combustion chamber. The efficiency of the heat recovery can reach 65% reducing the amount of energy ...
-
Manufactured by TKS Industrial Companybased in USA
A more thermally-efficient design, the Recuperative Thermal Oxidizer passes the hot exhaust gas through an air-to-air heat exchanger, heating the incoming process air to ~700°F, or 50% of the combustion temperature. Then, the burner in the oxidizer only needs to provide half the heat required for a successful ...
-
Manufactured by Kalfrisa, S.A.based in SPAIN
Installations for VOC"s Volatile Organic Compounds reduction by means of thermal oxidation designed and manufactured by Kalfrisa guarantee an optimum efficiency, thanks to the appropriate selection of temperature, residence time and mixture ...
-
Manufactured by TANN Corporationbased in USA
Recuperative thermal oxidizers use a stainless steel heat exchanger to preheat the incoming process air to within 400°F of the combustion temperature prior to entering the combustion chamber. The burner will provide the remaining energy to heat the process air to the combustion chamber temperature of ~1,400°F. In the combustion ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes. These oxidizers include heat recovery modules to preheat combustion air and incoming waste process streams to minimize fuel ...
-
Manufactured by Ventilazione Industriale Srlbased in ITALY
The combustion process merely involves oxidation of the carbon (C-) and hydrogen (H-) atoms contained in the molecules of hydrocarbons and solvents to be burnt, whose exothermic reaction gives rise to the following products: carbon dioxide (CO2) and steam ...
-
Manufactured by TKS Control Systems, Inc.based in USA
The TKS Recuperative Thermal Oxidizers are often used when low to moderate levels of Hazardous Air Pollutants (HAPs) and Volatile Organic Compounds (VOCs) exist in a given waste stream. This air pollution control device combines the right levels of turbulence, oxygen, time, and temperature in order to reach the ideal thermal ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
A recuperative thermal oxidizer is best for process applications with lower flow rates or VOC concentrations above 10% LEL. Applications of a recuperative thermal oxidizer include amine treater off gas, cellulosic ethanol plants, calciner and spray dryer exhaust, and chemical manufacturing ...
-
Manufactured by Brofind Spabased in ITALY
Recuperative thermal oxidizers have an external or integrated thermal recovery section, coaxial with the combustion chamber for energy saving ...
-
Manufactured by Epcon Industrial Systems, LPbased in USA
Epcon is an industry leader in Thermal Oxidizer technology and can design a system to fully integrate a customer's heat Processing Equipment with a Recuperative Thermal Oxidizer. This provides tremendous costs savings with respect to minimizing the use of natural gas and mechanical sub ...
-
Manufactured by Olpidürr S.p.Abased in ITALY
The Ecopure TAR system is a recuperative thermal oxidizer that has been used for more than 40 years to remove a variety of pollutants from exhaust air. These systems are generally suitable for exhaust air volume flows of 1000 Nm3/h or more and use a thermal ...
-
Manufactured by Prodesa Medioambientebased in SPAIN
It consists of oxidizing fuel compounds from a gas flow, at a temperature higher than its autoignition point, during a fixed time and with optimal mixing ...
-
Manufactured by Process Combustion Corporation (PCC)based in USA
This system is a direct fired thermal oxidizer with heat recovery added at the discharge end of the combustion ...
-
Manufactured by Dürr Systems, Inc.based in USA
The Oxi.X TR system is a recuperative thermal oxidizer that has been used for more than 40 years to remove a variety of pollutants from exhaust air. These systems are generally suitable for exhaust air volume flows of 1000 Nm3/h or more and use a thermal ...
-
Manufactured by Nacah Tech LLCbased in USA
Recuperative thermal oxidizers best suit VOC laden air streams with sufficient loading that provides more heat than for sound RTO’s operation but insufficient normal loading for DFTO (direct fired thermal oxidizer). Recups reduce the operating costs to an optimum level while not overheating ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you