recycling plant Equipment in Switzerland

26 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: recycling plant ×

  • In: Europe ×

  • In: Switzerland ×

Recycling Plants

by swissRTec AG     based in Kreuzlingen, SWITZERLAND

Many years experience in the recycling field combined with competent consulting and engineering, as well as the use of sophisticated systems, swissRTec develops and produces, fail-safe machines and plants for industrial use. With the development of the Delamination Mill, swissRTec has set a milestone in this sector. The Delamination Mill is ...

Cable Recycling Plant MIDI II-2

by RW Recycling World GmbH     based in Merishausen, SWITZERLAND

Cable Recycling PlantType RW – MIDI-II/2 150/250to granulate and separate cables. Throughput: 150 – 250kg/h depends on sorting and kind of cablesPre shredded cables up to 200 – 350kg/hConnected load: 33 kWMeasurement: l x w x h ca. 4,0m x 1,2m x 3.47m Input: Cable lengths up to max. 0,8m Diameter up to ca. 40mm Single wire up to ca. 10mm²

novoflow - Model SSDF Series - Single Shaft Disk Filter

by Novoflow GmbH Umwelt und Filtertechnik     Office in Zürich, SWITZERLAND

The SSDF system is characterized by rotation of filter disks in the feed liquid and extraordinary low energy consumption of about 0,12W/1m² filter surface area. Test plants are available in different sizes. Deliverable plant sizes range from 1 m2 and 500 m2 filter area.

BLUBOX - THE FIRST INTEGRATED PLANT FOR MIXED LAMP AND FLAT SCREEN RECYCLING

by BLUBOX Trading AG     based in Birrwil, SWITZERLAND

The vision to develop a BLUBOX which recycles hazardous waste was born several years ago. Because of the growing volume of flat panel displays (FPDs) and lamps containing mercury on the market, a solution was called for to enable theirsafe recycling without endangering human health or contaminating the environment. In cooperation with MTB ...

Composting Plants

by COMPAG Recycling und Umwelttechnik AG     based in Kreuzlingen, SWITZERLAND

COMPAG creates as a general contractor turnkey composting facilities for green waste, bio waste, and sewage sludge treated in an open or closed construction. The COMPAG facilities are characterized by high efficiency. Optimized workflow with the latest technology.

Screen Glass Recycling

by Solenthaler Recycling AG     based in Gossau, SWITZERLAND

Screen glass shows an excellent life cycle assessment as hundred per cent of the glass can be recycled. The production of glass from fragments allows to save raw materials and above all energy, as the initial mixture of materials does not require new melting. Our plant in Müllheim specializes in reprocessing of display screen glass and counts ...

RSD-Mini Waste

by Renergon International AG     based in Kreuzlingen, SWITZERLAND

The decentralized waste management concept of Renergon ensures certainty of disposal, as well as a certainty of supply (energy, recyclables, compost / fertiliser), while transport costs and efforts are reduced. The mixed garbage is delivered, prepared, separated and disposed. Valuable recyclable materials (metals, plastic, etc.) can be recycled ...

AQUALOOP - Water Treatment and Greywater Recycling

by INTEWA GmbH     Distributor in Rümlang, SWITZERLAND

AQUALOOP produces germ-free, bacteriological high quality drinking water, irrespective of whether the input water comes from surface water, groundwater, runoff water from wastewater treatment plants, industrial wastewater or grey water from houses!*

Mac - Model 111AS/1 - Baling Press

by R.C.P SA     based in Zollikon, SWITZERLAND

The Mac 111AS/1 baling press has been designed with a dual purpose in mind, firstly to take large volumes of material in excess of 35 tonnes per hour (dependant on grade and loose feed density) and secondly to take bulky material without preconditioning. Powered by two 75 Kw or 100HP motors this machine has the same cycle time as the Mac 111/1 but ...

Mac - Model 108/1 - Baling Press

by R.C.P SA     based in Zollikon, SWITZERLAND

The Mac 108/1 baling press offers bale production in excess of 18 tonnes per hour (dependant on grade and loose feed density). The use of high quality modern pumps combined with high efficiency electric motors, guarantee reduced consumption and low noise. Over engineered to withstand the demands of any modern medium to large recycling plant, its ...

Biogas Treatment Facilities

by COMPAG Recycling und Umwelttechnik AG     based in Kreuzlingen, SWITZERLAND

COMPAG solution with mixer for liquids and solids with integrated sand discharge.

Delamination Mill

by swissRTec AG     based in Kreuzlingen, SWITZERLAND

Many years experience in the recycling field combined with competent consulting and engineering, as well as the use of sophisticated systems, swissRTec develops and produces, fail-safe machines and plants for industrial use. With the development of the Delamination Mill, swissRTec has set a milestone in this sector. The Delamination Mill is ...

HORIBA - Model OCMA-310 - Oil Content Monitor

by HORIBA Europe GmbH     Office in SWITZERLAND

The OCMA-310 is an automated portable unit for monitoring oil content in both fresh water and saltwater. The one-touch monitoring process is fully automated, from sample extraction to analysis and sample expulsion. The OCMA-310 utilizes an S-316 extraction solvent to ensure superior oil particle stability and infrared absorptiometry for sample ...

Mechanical Vapor Compression

by AquaSwiss AG     based in Frauenfeld, SWITZERLAND

AquaSwiss Mechanical Vapor Compression (MVC) distillation is the most thermodynamically efficient process of single-purpose thermal desalination. The thermodynamic efficiency is derived from the application of the 'heat pump' principle by a large volumetric flow compressor acting as the 'heat pump', which continuously recycles and keeps the latent ...

CentriCut - Technology For Innovative Granulating Solutions

by Nuga Systems AG     based in Balgach, SWITZERLAND

The material to be granulated is transported by the conveyor screw into the centre of the granulating chamber and at the same time pre-portioned. The centrifugal effect of the rotor passes the granulating material through the openings in the rotor to the walls of the granulating chamber . Inside the granulating chamber the rotor- and stator blades ...

STEINERT - Model UM/AM - Suspension Magnet

by Steinert Elektromagnetbau GmbH     Office in Uetikon am See, SWITZERLAND

Suspension magnets from STEINERT have been extracting iron and iron-bearing components from bulk materials for many decades. They recover clean iron scrap for recycling, and protect grinders, mills and other processing equipment against wear and damage. STEINERT UM/AM can be used to remove unwanted tramp iron such as screws, nuts and rock bolt ...

BÜCHI - Model E-816 ECE - Automated Continuous Extraction Unit

by BÜCHI Labortechnik AG     based in Postfach, SWITZERLAND

Perform economic fat determination in food and feed samples with the E-816 ECE (Economic Continuous Extraction). The automated continuous extraction method ensures simple method selection and easy operation. Highest solvent recovery and reduced solvent consumption guarantee cost savings.

BUCHI - Model E-812 / E-816 SOX - Automated Soxhlet Extraction Unit

by BÜCHI Labortechnik AG     based in Postfach, SWITZERLAND

Perform fat determination on two or six food and feed samples simultaneously at the push of a button. As the only automated real Soxhlet instrument the E-812 / E-816 SOX is fully in accordance with officially approved methods.

BUCHI - Model E-812 / E-816 HE - Automated Hot Extraction Unit

by BÜCHI Labortechnik AG     based in Postfach, SWITZERLAND

Perform fat determination on two or six food and feed samples simultaneously at the push of a button. The E-812 / E-816 HE (Hot Extraction) is used for fast routine fat analysis.

Model CDP 112 - Diamond Plates

by Castolin Eutectic     based in St-Sulpice, SWITZERLAND

Contains densely and evenly distributed tungsten carbide particles in a 60 HRC Ni alloy matrix. CDP 112 is a steel plate (mild or stainless) coated with a layer of NiCrBSi alloy additioned with 35%WC. The coating is 100% non diluted and retains all its abrasion and erosion resistance properties.

Need help finding the right suppliers?

Let the XPRTs do the work for you