Relief Valve Equipment In Connecticut
-
Manufactured by Argo-Hytosbased in USA
3/4-16 UNF • Qmax 30 l/min (8 GPM) • pmax 350 bar (5100 ...
-
Manufactured by Buck Scientific Incbased in USA
Our patented elastomer pressure relief valve automatically re-seals if a vessel relieves pressure up to 60 Bar. This ensures operator safety and allows your samples to be saved in the event of an ...
-
Manufactured by Fluid-o-Tech s.r.l.based in ITALY
The PO 70-400 series positive displacement rotary vane pumps are available with brass or stainless steel housings with 3/8” GAS or NPT ports and internal relief valve. The nominal flow rates range between 70 and 400 l/h at 1450 rpm. Any pump of this series may be operated at 1725 rpm as well and will provide about 20% more ...
-
Manufactured by Fluid-o-Tech s.r.l.based in ITALY
The PO 500-1000 series positive displacement rotary vane pumps are available with brass or stainless steel housing with ½” GAS or NPT ports and internal relief valve. The nominal flow rates range between 500 and 1000 l/h at 1450 rpm. Any pumps of this series may be operated at 1725 rpm as well and will provide about 20% more ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Aqua Power Mini Nozzle is an excellent grease removal nozzle that quickly cuts through grease while cleaning out pipes and saving time. The Aqua Power Mini Nozzle is an excellent all-around cleaning and grease removal nozzle for pipelines. The sleeve is included as a valuable tool when working in service laterals. The sleeve prolongs the life of the Aqua Power Mini by elevating the rotating ...
-
Manufactured by Fluid-o-Tech s.r.l.based in ITALY
The Mono series solenoid pumps are economical, compact and capable of developing high pressure. A piston within the pump oscillates at power line frequency. No additional motor or control is needed. For intermittent duty only. Pump flow rate is up to a maximum of 120 l/h (30 GPH), while the discharge pressure is up to a maximum of 14 bar (200 ...
-
Manufactured by Buck Scientific Incbased in USA
The BMV-60 (Buck Microwave vessel 60ml) is the easiest microwave digestion vessel to use in the ...
-
Manufactured by Vacuubrand Gmbh Co Kgbased in GERMANY
ATEX chemistry diaphragm pumps offer all advantages of oil-free chemistry diaphragm pumps. Typical applications are rotary evaporators and drying ovens with potentially explosive atmospheres. The ATEX approval includes the interior of the pump (in contact with pumped gases) as well as the surrounding area of the pump. All wetted parts of the pumps have excellent chemical resistance and are mainly ...
-
Manufactured by Vacuubrand Gmbh Co Kgbased in GERMANY
ATEX chemistry diaphragm pumps offer all advantages of oil-free chemistry diaphragm pumps. Typical applications are rotary evaporators and drying ovens with potentially explosive atmospheres. The ATEX approval includes the interior of the pump (in contact with pumped gases) as well as the surrounding area of the pump. All wetted parts of the pumps have excellent chemical resistance and are mainly ...
-
Manufactured by Vacuubrand Gmbh Co Kgbased in GERMANY
ATEX chemistry diaphragm pumps offer all advantages of oil-free chemistry diaphragm pumps. Typical applications are rotary evaporators and drying ovens with potentially explosive atmospheres. The ATEX approval includes the interior of the pump (in contact with pumped gases) as well as the surrounding area of the pump. All wetted parts of the pumps have excellent chemical resistance and are mainly ...
-
Manufactured by Preferred Utilities Manufacturing Corporationbased in USA
The Model LO Light Oil Pump and Motor Assemblies are compact, direct drive units designed to meet the performance and reliability standards demanded in commercial, industrial and institutional ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The LFT C-type bladders are durable floating storage tanks designed for temporary storage of recovered oil.The tanks are mainly intended for use at sea as a towable storage bladder, and can also be used on ...
-
Manufactured by Vacuubrand Gmbh Co Kgbased in GERMANY
ATEX chemistry vacuum systems are ready for use for applications with large amounts of condensable vapors due to optimally configured accessories. Typical applications are rotary evaporators and drying ovens with potentially explosive atmospheres. The separator at the inlet (AK) retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. ...
-
Manufactured by Kahn & Company, Inc.based in USA
The need for clean, pure, moisture-free compressed air and gas is critical. Moisture and contaminants are found in all compressed air and gas systems causing rust and corrosion in your pneumatic tools, contaminating process flows, clogging and damaging delicate pneumatic instrumentation. When freezing temperatures are encountered, condensation trapped in air systems will freeze, causing ...
-
Manufactured by Vacuubrand Gmbh Co Kgbased in GERMANY
ATEX chemistry vacuum systems are ready for use for applications with large amounts of condensable vapors due to optimally configured accessories. Typical applications are rotary evaporators and drying ovens with potentially explosive atmospheres. The separator at the inlet (AK) retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. ...
-
Manufactured by Vacuubrand Gmbh Co Kgbased in GERMANY
ATEX chemistry vacuum systems are ready for use for applications with large amounts of condensable vapors due to optimally configured accessories. Typical applications are rotary evaporators and drying ovens with potentially explosive atmospheres. The separator at the inlet (AK) retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. ...
-
Manufactured by Kahn & Company, Inc.based in USA
The need for clean, pure, moisture-free compressed air and gas is critical. Moisture and contaminants are found in all compressed air and gas systems . . . causing rust and corrosion in your pneumatic tools, contaminating process flows, clogging and damaging delicate pneumatic instrumentation. When freezing temperatures are encountered, condensation trapped in air systems will freeze, causing ...
-
Manufactured by Buck Scientific Incbased in USA
Our Latest microwave digestion system (The Alchemist 1600) was designed from the ground up to offer the safest, and easiest to use microwave digestion system we have ever offered. Our finger tight vessels and wireless temperature and pressure monitoring eliminate the need for costly ...
-
Manufactured by Buck Scientific Incbased in USA
The top loading Alchemist 4000 microwave digestion system is designed for maximum throughput. 3000 watts of user controllable power, and dual magnetrons ensure fast and even digestions of the toughest ...
-
Manufactured by Burt Process Equipment, Inc. (BPE)based in USA
Chemical Feed Systems (Chemical Dosing Systems) inject chemicals into a waste stream to adjust pH, remove unwanted dissolved or suspended solids, and assist with final water purification. Almost all wastewater treatment processes incorporate chemical feed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you