Relief Valve Equipment In West Virginia
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS and 206-RPS pressure relief valves are based on the 106-PG and 206-PG main valves. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot setting. The valve opens rapidly to ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 18-FR is a remote sensing, high capacity, spring and diaphragm operated, normally closed valve. The inner valve is held closed by the spring. When the sensed pressure increases above the spring setting, the valve ...
-
Manufactured by Groth Corporationbased in USA
Pressure Relief Valve w/Pipe-Away Feature and same-size inlet and outlet. Groth Series 1700 relief valves are designed with inlet and outlet flanges of the same size to reduce installation costs by having smaller downstream piping. Model 1760A valves are designed for systems requiring only pressure ...
-
Manufactured by Groth Corporationbased in USA
Model 1200A is designed to vent to atmosphere to protect your tank from damage created by over-pressure or excessive vacuum. Costly product evaporation losses due to normal tank 'breathing' are greatly reduced. Because the Model 1200A retains toxic vapors, atmospheric contamination is minimized. This helps to provide increased fire protection and ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-L&H and 206-RPS-L&H anticipating surge relief valves are based on the 106-PG or 206-PG main valve. The valve is mounted in a tee, downstream of the pump check valve(s). It is designed to anticipate surges to avoid the severe water hammer often associated with power failure ...
-
Manufactured by Groth Corporationbased in USA
Model 1300A is used when vacuum relief is the only requirement.Intake relief necessary under working conditions is achieved by a spring or weight loaded pallet. This feature of the Model 1300A reduces the possibility of tank damage. The Model 1300A helps to provide increased fire protection and safety. Valve size must be selected to ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-8700 pressure relief valve, which is UL / FM labelled and listed, automatically relieves excess pressure in the fire protection system to discharge. The RPS series valves will also automatically modulate to relieve excess pump capacity during pump start up and shut down, allowing the pump to operate without causing surges. These ...
-
Manufactured by Groth Corporationbased in USA
The Groth Model 1500 Air Operated Pressure/Vacuum Relief Valve is used to replace weight-loaded, spring-loaded, and pilot-operated valves in severe applications where polymerization and crystallization may take place and plug as well as corrode the control orifices. The air-operated valve increases valve ...
-
Manufactured by Groth Corporationbased in USA
Pressure Relief Valve Model 1260A is for use where pressure relief is required and all relieving vapors must be piped away. Tank relief, to avoid tank damage, is controlled by a spring or weight loaded pallet in the valve housing. Pressure relief valves help provide increased ...
-
Manufactured by Mueller Water Productsbased in CANADA
The A106-Dynamic Lifter (DL) sewage pressure relief valve is a direct acting spring loaded relief valve. The valve is adjusted to open when the pressure exceeds the set-point, which is approximately 10% above the normal operating pressure. The valve closes drip-tight when pressure falls below the ...
-
Manufactured by Groth Corporationbased in USA
The Groth 1400 Pilot-Operated Relief Valve is used to replace weight-loaded or spring loaded valves in many applications to increase efficiency and reduce evaporation losses. Several advantages are obtained over the traditional type. For example, the process pressures may be closer to the set pressure than would be considered prudent and ...
-
Manufactured by Groth Corporationbased in USA
Model 1220A is used for pressure and vacuum relief where vapors must be piped away. Escaping vapors are piped away through a flanged outlet connection. This helps to provide increased fire protection and safety. ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-RR and 206-RPS-RR surge anticipating relief on rate of rise valves are based on the 106-PG or 206-PG main valve. The valve is installed downstream of the pump check valve(s) and has two pilots, the 81-RP and the 81-RPD. Both pilots sense pressure through a connection to the header pipe. The 81-RP high ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Model A106-DL-Air is a compact sewage relief valve that is suitable for high pressures up to 200 psi / 13.8 bar, responds very quickly and retains all the features and benefits of the Model A106-DL Spring–Hydraulic version. It is an attractive solution to what may be otherwise a difficult application due to higher pressures or ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-D and 206-RPS-D pressure differential sustaining valves are based on the 106-PG or 06-PG main valve. The RPS-D uses the 81-RPD pilot valve and has two sensing connections. The valve and pilot remain closed until the difference between the two pressures exceeds the pilot setting. Under flowing conditions, the pilot ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS and 206-RPS pressure sustaining valves are based on the model 106-PG or 206-PG main valve. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Aqua Power Mini Nozzle is an excellent grease removal nozzle that quickly cuts through grease while cleaning out pipes and saving time. The Aqua Power Mini Nozzle is an excellent all-around cleaning and grease removal nozzle for pipelines. The sleeve is included as a valuable tool when working in service laterals. The sleeve prolongs the life of the Aqua Power Mini by elevating the rotating ...
-
Manufactured by Marsh Belloframbased in USA
The Marsh Bellofram Type 10 Air Pressure Regulator is designed to control output pressure with accuracy of 0.1% and high-repeatability, with very low sensitivity to changes in supply pressure, ambient temperature and ...
-
Manufactured by Peerless Pump Companybased in USA
The Peerless Pump PVF Series 2000, 3000 and 4000 Underwriter’s Laboratories (U.L.) listed fire pumps are pre-wired packages that include a limited or full service controller. Every package is mounted on a steel fabricated base with the motor wired to the controller. The automatic air relief valve, casing relief valve, ...
-
Manufactured by Peerless Pump Companybased in USA
The Peerless Pump PVF Series 2000, 3000 and 4000 Underwriter’s Laboratories (U.L.) listed fire pumps are pre-wired packages that include a limited or full service controller. Every package is mounted on a steel fabricated base with the motor wired to the controller. The automatic air relief valve, casing relief valve, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you